Junk (ship)

A junk ( ) is a type of Chinese sailing ship characterized by a central rudder, an overhanging flat transom, watertight bulkheads, and a flat-bottomed design.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 9 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A junk ( ) is a type of Chinese sailing ship characterized by a central rudder, an overhanging flat transom, watertight bulkheads, and a flat-bottomed design. They are also characteristically built using iron nails and clamps.

The term applies to many types of small coastal or river ships, usually serving as cargo ships, pleasure boats, or houseboats, but also going up in size up to large ocean-going vessels. There can be significant regional variations in the type of rig and the layout of the vessel.

Chinese junks were originally only fluvial and had square sails, but by the Song dynasty ( ), they adopted ocean-going technologies acquired from Southeast Asian k'un-lun po trade ships. Tanja sails and fully battened junk rigs were introduced to Chinese junks by the 12th century CE.

Similar designs to the Chinese junk were also adopted by other East Asian countries, most notably Japan, where junks were used as merchant ships to trade goods with China and Southeast Asia.

Etymology and history of the term

s and other smaller craft (D'Eerste Boeck, ), note the double rudders which distinguished Southeast Asian ships from the Chinese chuán which had a central rudder The English word "junk" comes from Portuguese from Malay , which was in turn loaned from the Old Javanese word jong. The word originally referred to large trading ships that the Portuguese first encountered in Southeast Asia.

It later also included the smaller flat-bottomed Chinese chuán, even though the two were markedly different vessels. After the disappearance of the jong in the 17th century, the meaning of "junk" (and other similar words in European languages) came to refer exclusively to the Chinese ship.

The Chinese chuán and the Southeast Asian djong are frequently confused with each other and share some characteristics, including large cargo capacities, multiple (two to three) superimposed layers of hull planks, and multiple masts and sails. However the two are readily distinguishable from each other by two major differences.

The first is that Southeast Asian (Austronesian) ships are built exclusively with lugs, dowels, and fiber lashings (lashed lug), in contrast to Chinese ships which are always built with iron nails and clamps. The second is that Chinese ships since the first century AD are all built with a central rudder. In contrast, Southeast Asian ships use double lateral rudders.

The development of the sea-going Chinese chuán (the "junk" in modern usage) in the Song dynasty ( ) is believed to have been influenced by regular contacts with sea-going Southeast Asian ships (the k'un-lun po of Chinese records) in trading ports in southern China from the 1st millennium CE onward, particularly in terms of the rigging, multiple sails, and the multiple hull sheaths. However, the chuán also incorporates distinctly Chinese innovations from their indigenous river and coastal vessels (namely watertight compartments and the central rudders).

"Hybrid" ships (referred to as the "South China Sea tradition") integrating technologies from both the chuán and the jong also started to appear by the 15th century. Tracing of two ships from Dunhuang cave.jpg|Tracing of two ships from Dunhuang cave temple, c. 8th–9th century CE. The ships showed square sails.

A stern sculling oar is also present (known as a yuloh, 摇橹). Tracing of a ship on a mirror in the Shaanxi museum.jpg|Tracing of a ship on a mirror in the Shaanxi museum (circa 9th or 12th century CE) Iconographic remains show that Chinese ships before the 12th century used square sails.

A ship carving from a stone Buddhist stele shows a ship with square sail from the Liu Sung dynasty or the Liang dynasty (c. 5th or 6th century). Dunhuang cave temple no. 45 (from the 8th or 9th century) features large sailboats and sampans with inflated square sails. A wide ship with a single sail is depicted in the Xi'an mirror (after the 9th or 12th century).

Eastern lug sail, which used battens and is commonly known as "junk rig", was likely not Chinese in origin: The oldest depiction of a battened junk sail comes from the Bayon temple at Angkor Thom, Cambodia. From its characteristics and location, it is likely that the ship depicted in Bayon was a Southeast Asian ship.

The Chinese themselves may have adopted them around the 12th century CE. The full-length battens of the junk sail keep the sail flatter than ideal in all wind conditions. Consequently, their ability to sail close to the wind is poorer than other fore-and-aft rigs.

Expedition of Zheng He

The largest junks ever built were possibly those of Admiral Zheng He, for his expeditions in the Indian Ocean (1405 to 1433), although this is disputed as no contemporary records of the sizes of Zheng He's ships are known. Instead the dimensions are based on Sanbao Taijian Xia Xiyang Ji Tongsu Yanyi (Eunuch Sanbao Western Records Popular Romance, published 15971), a romanticized version of the voyages written by nearly two centuries later.

Maodeng's novel describes Zheng He's ships as follows: "Treasure ships" ( ) nine-masted, 44.4 by 18 zhang, about long and wide. Equine ships ( ), carrying horses and tribute goods and repair material for the fleet, eight-masted, 37 by 15 zhang, about long and wide. Supply ships ( ), containing staple for the crew, seven-masted, 28 by 12 zhang, about long and wide.

Transport ships ( ), six-masted, 24 by 9.4 zhang, about long and wide. Warships ( ), five-masted, 18 by 6.8 zhang, about long. Louise Levathes suggests that the actual length of the biggest treasure ships may have been between long and wide.

Modern scholars have argued on engineering grounds that it is highly unlikely that Zheng He's ship was 450 ft in length, Guan Jincheng (1947) proposed a much more modest size of 20 zhang long by 2.4 zhang wide (204 ft by 25.5 ft or 62.2 m by 7.8 m) while Xin Yuan'ou (2002) put them as 61–76 m (200–250 feet) in length. Zhao Zhigang claimed that he has solved the debate of the size difference, and stated that Zheng He's largest ship was about in length.

Comparing to other Ming records, the Chinese seem to have exaggerated their dimensions. European East Indiamen and galleons were said to be 30, 40, 50, and 60 zhang (90, 120, 150, and 180 m) in length.

It was not until the mid to late 19th century that the length of the largest western wooden ship began to exceed 100 meters, even this was done using modern industrial tools and iron parts.

Modern period (20th century)

Tek Hwa Seng in the Dutch East Indies (1936) In 1938, E. Allen Petersen escaped the advancing Japanese armies by sailing a junk, Hummel Hummel, from Shanghai to California with his wife Tani and two White Russians (Tsar loyalists). In 1955, six young men sailed a Ming dynasty-style junk from Taiwan to San Francisco.

The four-month journey aboard the Free China was captured on film and their arrival into San Francisco made international front-page news. The five Chinese-born friends saw an advertisement for an international trans-Atlantic yacht race, and jumped at the opportunity for adventure. They were joined by the then US Vice-Consul to China, who was tasked with capturing the journey on film.

Enduring typhoons and mishaps, the crew, having never sailed a century-old junk before, learned along the way. The crew included Reno Chen, Paul Chow, Loo-chi Hu, Benny Hsu, Calvin Mehlert and were led by skipper Marco Chung. After a journey of , the Free China and her crew arrived in San Francisco Bay in fog on August 8, 1955.

Shortly afterward the footage was featured on ABC television's Bold Journey travelogue. Hosted by John Stephenson and narrated by ship's navigator Paul Chow, the program highlighted the adventures and challenges of the junk's sailing across the Pacific, as well as some humorous moments aboard ship. in 2009 In 1959 a group of Catalan men, led by Jose Maria Tey, sailed from Hong Kong to Barcelona on a junk named Rubia.

After their successful journey this junk was anchored as a tourist attraction at one end of Barcelona harbor, close to where La Rambla meets the sea. Permanently moored along with it was a reproduction of Columbus' caravel Santa Maria during the 1960s and part of the 1970s. In 1981, Christoph Swoboda had a 65 feet (LoA) Bedar built by the boatyard of Che Ali bin Ngah on Duyong island in the estuary of the Terengganu river on the east coast of Malaysia.

The Bedar is one of the two types of Malay junk schooners traditionally built there. He sailed this junk with his family and one friend to the Mediterranean and then continued with changing crew to finally finish a circumnavigation in 1998.

He sold this vessel in 2000 and in 2004 he started to build a new junk in Duyong with the same craftsmen, the Pinas (or Pinis) Naga Pelangi, in order to help keep this ancient boat building tradition alive. This boat finished to be fitted out in 2010 and is working as a charter boat in the Andaman and the South China Sea.

See also

Casco (barge), flat hulled barges of the Philippines Pinisi Lorcha Tongkang Keying, a Chinese junk that was sailed to the US in the 1840s Shipyards in Macau Junk rig

World of Boats (EISCA) Collection ~ Keying II Hong Kong Junk China Seas Voyaging Society The Free China, homepage of one of the last remaining 20th century junks, with video. The Junk and Advanced Cruising Rig Association, The JRA Pirates and Junks in Late Imperial South China

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374195482 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Junk (ship)” revision 1374195482 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL