Kayak

snow training at Hanna Lake seal hunter in a kayak, armed with a harpoon|alt=Man sitting with legs covered in a boat that tapers to a point at each end holding long, pointed, wooden pole ] in Los Glaciares National Park s.|thumb|alt=Photo…

Uses your system voice; voice and rate in settings.

≈ 18 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

snow training at Hanna Lake seal hunter in a kayak, armed with a harpoon|alt=Man sitting with legs covered in a boat that tapers to a point at each end holding long, pointed, wooden pole ] in Los Glaciares National Park s.|thumb|alt=Photo of a person sitting in a boat holding a paddle with otters swimming in the foreground. The boat is approximately 12 feet long and only slightly wider than the paddler.

A kayak is a small, narrow human-powered watercraft typically propelled by means of a long, double-bladed paddle. The word kayak originates from the Inuktitut word qajaq ( ). In British English, the kayak is also considered to be a kind of canoe.

There are countless different types of kayaks due to the craft being easily adaptable for different environments and purposes. The traditional kayak has an enclosed deck and one or more cockpits, each seating one occupant or kayaker, differentiating the craft from an open-deck canoe.

The cockpit is sometimes covered by a spray deck that prevents unwanted entry of water from waves or splashes. Even within these confines, kayaks vary vastly in respect to materials, length, and width, with some kayaks such as the sprint kayak designed to be fast and light, and others such as the whitewater kayak designed to be sturdy and maneuverable.

Some modern paddlecrafts, which still claim the title "kayak", remove integral parts of the traditional design; for instance, by eliminating the cockpit and seating the paddler on top of a canoe-like open deck, commonly known as a sit-on-top kayak. Other designs include inflated air chambers surrounding the craft; replacing the single hull with twin hulls; and replacing handheld paddles with other human-powered propulsion methods such as pedal-driven propeller and "flippers".

Some kayaks are also fitted with external sources of propulsion, such as a battery-powered electric motor to drive a propeller or flippers, a sail (which essentially modifies it into a sailboat), or even a completely independent gasoline outboard engine (which converts it into a de facto motorboat). The kayak was first used by the indigenous Aleut, Inuit, Yupik and possibly Ainu hunters in subarctic regions of the world. , Alaska, photographed by Edward S. Curtis, 1930|alt=Photo of two males wearing fur sitting in well of large kayak World Championships in Vaxholm, Sweden, photographed by Gunnar Lundh in 1938 Original Aleutian kayaks (Inuktitut: qajaq (ᖃᔭᖅ ), Yup'ik: qayaq (from qai- "surface; top"), Aleut: Iqyax) were originally developed by the Inuit, Yup'ik, and Aleut.

They used the boats to hunt on inland lakes, rivers and coastal waters of the Arctic Ocean, North Atlantic, Bering Sea and North Pacific oceans. These first kayaks were constructed from stitched seal or other animal skins stretched over a wood or whalebone-skeleton frame. (Western Alaskan Natives used wood whereas the eastern Inuit used whalebone due to the treeless landscape.)

Kayaks are believed to be at least 4,000 years old. The oldest kayaks remaining are exhibited in the North America department of the State Museum of Ethnology in Munich, with the oldest dating from 1577. Subarctic people made many types of boats for different purposes.

The Aleut baidarka was made in double or triple cockpit designs, for hunting and transporting passengers or goods. An umiak is a large open-sea canoe, ranging from , made with seal skins and wood, originally paddled with single-bladed paddles and typically had more than one paddler.

Subarctic builders designed and built their boats based on their own experience and that of the generations before them passed on through oral tradition. The word "kayak" means "man's boat" or "hunter's boat", and subarctic kayaks were a personal craft, each built by the man who used it and closely fitting his size for maximum maneuverability.

For this reason, kayaks were often designed ergonomically using one's own body proportions as units of measure. The paddler wore a tuilik, a garment that was stretched over the rim of the kayak coaming and sealed with drawstrings at the coaming, wrists, and hood edges.

This enabled the "eskimo roll" and rescue to become the preferred methods of recovery after capsizing, especially as few Inuit could swim; their waters are too cold for a swimmer to survive for long. Instead of a tuilik, most traditional kayakers today use a spray deck made of waterproof synthetic material stretchy enough to fit tightly around the cockpit rim and body of the kayaker, and which can be released rapidly from the cockpit to permit easy exit (in particular in a wet exit after a capsizing).

Inuit kayak builders had specific measurements for their boats. The length was typically three times the span of his outstretched arms. The width at the cockpit was the width of the builder's hips plus two fists (sometimes less).

The typical depth was his fist plus the outstretched thumb (hitch hiker). Thus typical dimensions were about long by wide by deep.

Traditional kayaks encompass three types: Baidarkas, from the Bering Sea and Aleutian Islands, the oldest design, whose rounded shape and numerous chines give them an almost blimp-like appearance; West Greenland kayaks, with fewer chines and a more angular shape, with gunwales rising to a point at the bow and stern; and East Greenland kayaks that appear similar to the West Greenland style, but often fit more snugly to the paddler and possess a steeper angle between gunwale and stem, which lends maneuverability. Most of the Aleut people in the Aleutian Islands eastward to Greenland Inuit relied on the kayak for hunting a variety of prey—primarily seals, though whales and caribou were important in some areas.

Skin-on-frame kayaks are still being used for hunting by Inuit in Greenland, because the smooth and flexible skin glides silently through the waves.

20th century & contemporary kayaks

's kayaking route from Germany to Australia Contemporary traditional-style kayaks trace their origins primarily to the native boats of Alaska, northern Canada, and Southwest Greenland. The use of fabric kayaks on wooden frames called a foldboat or folding kayak (German Faltboot or Hadernkahn) became widely popular in Europe beginning in 1907 when they were mass-produced by Johannes Klepper and others.

This type of kayak was introduced to England and Europe by John MacGregor in 1860, but Klepper was the first person to mass-produce these boats made of collapsible wooden frames covered by waterproof rubberized canvas. By 1929, Klepper and Company were making 90 foldboats a day.

Joined by other European manufacturers, by the mid-1930s there were an estimated half-million foldboat kayaks in use throughout Europe. First Nation masters of the roll taught this technique to Europeans during this time period. These boats were tough and intrepid individuals were soon doing amazing things in them.

In June 1928, a 29-year-old German kayaker named Franz Romer rigged his foldboat with a sail and departed from Las Palmas in the Canary Islands carrying of tinned food and of fresh water, reaching Saint Thomas, U.S. Virgin Islands after and 58 days, becoming the first recorded person to traverse the Atlantic Ocean on a sea kayak. Romer continued west to Puerto Rico after resting for six weeks, planning to eventually arrive at New York City, but unfortunately perished at sea after leaving Port of San Juan on September 11 (missing the hurricane warning by merely an hour) and running into the devastating Okeechobee hurricane some two days later at the southwestern edge of the Bermuda Triangle (likely near the northeastern shores of the Dominican Republic) during his journey towards Florida.

Four years later in May 1932, another German named Oskar Speck left Ulm and paddled his foldboat kayak southeast down the Danube, eventually reaching the Torres Strait Islands on the Australian north coast seven years later in September 1939, after having traveled roughly along the shores of the Eastern Mediterranean, Persian Gulf, Indian Ocean, Java Sea and Coral Sea. These watercraft were brought to the United States and used competitively in 1940 at the first National Whitewater Championship held in America near Middledam, Maine, on the Rapid River (Maine).

One "winner," Royal Little, crossed the finish line clinging to his overturned foldboat. Upstream, the river was "strewn with many badly buffeted and some wrecked boats." Two women were in the competition, Amy Lang and Marjory Hurd.

With her partner Ken Hutchinson, Hurd won the double canoe race. Lang won the doubles foldboat event with her partner, Alexander "Zee" Grant. In the late 1930s and early 1940s, Alexander "Zee" Grant was most likely America's best foldboat pilot.

Grant kayaked the Gates of Lodore on the Green River (Colorado River tributary) in Dinosaur National Monument in 1939 and the Middle Fork Salmon River in 1940. In 1941, Grant paddled a foldboat through Grand Canyon National Park. He outfitted his foldboat, named Escalante, with a sponson on each side of his boat and filled the boat with beach balls.

As with nearly all American foldboat enthusiasts of the day, he did not know how to roll his boat. Fiberglass mixed with resin composites, invented in the 1930s and 1940s, were soon used to make kayaks and this type of watercraft saw increased use during the 1950s, including in the US. Kayak Slalom World Champion Walter Kirschbaum built a fiberglass kayak and paddled it through Grand Canyon in June 1960.

He knew how to roll and only swam once, in Hance Rapid (see List of Colorado River rapids and features). Like Grant's foldboat, Kirschbaum's fiberglass kayak had no seat and no thigh braces.

In June 1987, Ed Gillet, using a stock off the shelf traditional design 20 foot long by 31 inch wide fiberglass tandem kayak paddled over 2,000 miles non-stop from Monterey, California to Hawaii, landing his vessel there on August 27, 1987, after 64 days of paddling. Gillet had navigated his kayak by using a traditional sextant and compass, along with approximately 600 pounds of food and water, including a device to convert sea water to fresh water.

Within six days of reaching Hawaii, both he and his yellow kayak were featured on The Tonight Show, hosted by Johnny Carson. Inflatable rubberized fabric boats were first introduced in Europe and rotomolded plastic kayaks first appeared in 1973. Most kayaks today are made from roto-molded polyethylene resins.

The development of plastic and rubberized inflatable kayaks arguably initiated the development of freestyle kayaking as we see it today since these boats could be made smaller, stronger, and more resilient than fiberglass boats. ; long hull, ~no rocker|alt=Long, thin kayak with blunt bow and stern, on flat water, person getting in As a general rule, a longer kayak is faster: it has a higher hull speed. It can also be narrower for a given displacement, reducing the drag, and it will generally track (follow a straight line) better than a shorter kayak.

On the other hand, it is less maneuverable. Very long kayaks are less robust, and may be harder to store and transport. Some recreational kayak makers try to maximize hull volume (weight capacity) for a given length as shorter kayaks are easier to transport and store.

Kayaks that are built to cover longer distances such as touring and sea kayaks are longer, generally . With touring kayaks the keel is generally more defined (helping the kayaker track in a straight line). Whitewater kayaks, which generally depend upon river current for their forward motion, are short, to maximize maneuverability.

These kayaks rarely exceed in length, and play boats may be only long. Recreational kayak designers try to provide more stability at the price of reduced speed, and compromise between tracking and maneuverability, ranging from .

(angles) give a more rounded profile, decreasing stability, tracking, and the wetted area, and increasing speed.|alt=1) a five-sided polygon which is nearly a wide rectangle, with the lower long side (the boat's bottom) a bit shorter than the upper (the deck) and the fifth point (the keel) slightly bending the nearly-flat bottom downwards. 2) The short sides retain the same angle, but the keel is a bit lower and the chines a bit higher.

3) The chines are substantially closer together and higher than the keel so that the angles of the hull at the chines and at the keel are all three approximately equal. 4) Two additional chines make a seven-sided polygon which approximates a half-circle with the flat side up. 5) A 9-sided polygon approximating a half-circle more closely.

Primary (sometimes called initial) stability describes how much a boat tips, or rocks back and forth when displaced from level by paddler weight shifts. Secondary stability describes how stable a kayak feels when put on edge or when waves are passing under the hull perpendicular to the length of the boat.

For kayak rolling, tertiary stability, or the stability of an upside-down kayak, is also important (lower tertiary stability makes rolling up easier). Primary stability is often a big concern to a beginner, while secondary stability matters both to beginners and experienced travelers.

By example, a wide, flat-bottomed kayak will have high primary stability and feel very stable on flat water. However, when a steep wave breaks on such a boat, it can be easily overturned because the flat bottom is no longer level.

By contrast, a kayak with a narrower, more rounded hull with more hull flare can be edged or leaned into waves and (in the hands of a skilled kayaker) provides a safer, more comfortable response on stormy seas. Kayaks with only moderate primary, but excellent secondary stability are, in general, considered more seaworthy, especially in challenging conditions. , the two stringers, and the keel.

The shape of the cross section affects stability, maneuverability, and drag. Hull shapes are categorized by roundness, flatness, and by the presence and angle of chines. This cross-section may vary along the length of the boat.

A chine typically increases secondary stability by effectively widening the beam of the boat when it heels (tips). A V-shaped hull tends to travel straight (track) well but makes turning harder. V-shaped hulls also have the greatest secondary stability.

Conversely, flat-bottomed hulls are easy to turn, but harder to direct in a constant direction. A round-bottomed boat has minimal area in contact with the water, and thus minimizes drag; however, it may be so unstable that it will not remain upright when floating empty, and needs continual effort to keep it upright.

In a skin-on-frame kayak, chine placement may be constrained by the need to avoid the bones of the pelvis. Sea kayaks, designed for open water and rough conditions, are generally narrower at and have more secondary stability than recreational kayaks, which are wider , and have a flatter hull shape and more primary stability.

File:Weight distribution kayak.svg|The position of the center of gravity is affected by body shape. The lower the CoG, the higher the primary stability. File:Stability for beginners.svg|Two different approaches to giving beginners more stability; left, a wider kayak, right, outriggers lashed across the stern deck The body of the paddler must also be taken into account.

A paddler with a low center of gravity (COG) will find all boats more stable; for a paddler with a high center of gravity, all boats will feel tippier. On average, women have a lower COG than men. Women generally may fit a kayak about 10% narrower than the kayak that would fit a similarly sized man.

Commercial kayaks made for women are rare. Unisex kayaks are built for men. Younger children have proportionately smaller and lighter bodies, but near-adult-size heads, and thus a higher center of gravity.

A paddler with narrow shoulders will also want a narrower kayak. Newcomers will often want a craft with high primary stability (see above). The southern method is a wider kayak.

The West Greenland method is a removable pair of outriggers, lashed across the stern deck. Such an outrigger pair is often homemade of a small plank and found floats such as empty bottles or plastic ducks. Outriggers are also made commercially, especially for fishing kayaks and sailing.

If the floats are set so that they are both in the water, they give primary stability, but produce more drag. If they are set so that they are both out of the water when the kayak is balanced, they give secondary stability. |alt=Photo of single-person kayak sitting on land Recreational kayaks are designed for the casual paddler interested in fishing, photography, or a peaceful paddle on a lake, flatwater stream or protected salt water away from strong ocean waves.

These boats presently make up the largest segment of kayak sales. Compared to other kayaks, recreational kayaks have a larger cockpit for easier entry and exit and a wider beam ( ) for more stability. They are generally less than in length and have limited cargo capacity.

Less expensive materials like polyethylene and fewer options keep these boats relatively inexpensive. Most canoe/kayak clubs offer introductory instruction in recreational boats. They do not perform as well in the sea.

The recreational kayak is usually a type of touring kayak. in Seattle, Washington, United States|alt=Photo of rear of person wearing orange life preserver sitting in kayak with buildings in far background Sea kayaks are typically designed for travel by one, two or even three paddlers on open water and in many cases trade maneuverability for seaworthiness, stability, and cargo capacity. Sea-kayak sub-types include "skin-on-frame" kayaks with traditionally constructed frames, open-deck "sit-on-top" kayaks, and recreational kayaks.

The sea kayak, though descended directly from traditional types, is implemented in a variety of materials. Sea kayaks typically have a longer waterline, and provisions for below-deck storage of cargo. Sea kayaks may also have rudders or skegs (fixed rudder) and upturned bow or stern profiles for wave shedding.

Modern sea kayaks usually have two or more internal bulkheads. Some models can accommodate two or sometimes three paddlers. competition, Tofino, Canada|alt=Photo of beach, with several kayaks strewn around and people in background Specialty surf boats typically have flat bottoms, and hard edges, similar to surf boards.

The design of a surf kayak promotes the use of an ocean surf wave (moving wave) as opposed to a river or feature wave (moving water). They are typically made from rotomolded plastic, or fiberglass. Surf kayaking comes in two main varieties, High Performance (HP) and International Class (IC).

High Performance boats tend to have a lot of nose rocker, little to no tail rocker, flat hulls, sharp rails and up to four fins set up as either a three fin thruster or a quad fin . This enables them to move at high speed and maneuver dynamically.

International Class boats have to be at least long and until a recent rule change had to have a convex hull; now flat and slightly concave hulls are also allowed, although fins are not. Surfing on international boats tends to be smoother and more flowing, and they are thought of as kayaking's long boarding.

Surf boats come in a variety of materials ranging from tough but heavy plastics to super light, super stiff but fragile foam–cored carbon fiber. Surf kayaking has become popular in traditional surfing locations, as well as new locations such as the Great Lakes. |alt=Photo of man in kayak holding paddle nearly parallel to the boat, surrounded by white water Whitewater kayaks are rotomolded in a semi-rigid, high impact plastic, usually polyethylene.

Careful construction ensures that the boat remains structurally sound when subjected to fast-moving water. The plastic hull allows these kayaks to bounce off rocks without leaking, although they scratch and eventually puncture with enough use. Whitewater kayaks range from long.

There are two main types of whitewater kayak, playboats and river-running boats. Creekboats (for small rivers) and squirt boats are more specialized.

International Canoe Federation - the international federation of kayak and canoe bodies The Canadian Museum of Civilization – Native Watercraft in Canada British Canoe Union - the national governing body of kayaking in the UK Kayak size guide - Fishing Learn Greenlandinc terms for the parts of a kayak A kayak made from clear wood and fiberglass with LEDs - YouTube video

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378827094 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001378827094 · captured 2026-10-06 · ledger · version history

Cite this page as: encyclopegia.org, “Kayak”, snapshot enwiki-001378827094. https://encyclopegia.org/a/kayak

Sources cited in this revision

28 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.