Kevlar

Uses your system voice; voice and rate in settings.

Q207344Snapshot

≈ 5 min read

Names in other languages

  • EnglishKevlar
  • עבריתקוולאר
  • PolskiKevlar
  • 中文凯芙拉
  • 简体中文凯芙拉
  • 繁體中文克維拉
  • 中文克維拉
  • 中文凯芙拉
  • 中文克維拉

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Kevlar (para-aramid) is a strong, heat-resistant synthetic fiber, related to other aramids such as Nomex and Technora. Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s as a replacement for steel in racing tires. It is typically spun into ropes or fabric sheets that can be used as such, or as an ingredient in composite material components.

Kevlar has many applications, ranging from bicycle tires and racing sails to bulletproof vests, due to its high tensile strength-to-weight ratio; by this measure it is five times stronger than steel. It is also used to make modern marching drumheads that withstand high impact, and for mooring lines and other underwater applications. A similar fiber, Twaron, with the same chemical structure was developed by Akzo in the 1970s. Commercial production started in 1986, and Twaron is manufactured by Teijin Aramid.

The term Kevlar is of obscure origin and likely created arbitrarily.

Kevlar (para-aramid) is a strong, heat-resistant synthetic fiber, related to other aramids such as Nomex and Technora. Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s as a replacement for steel in racing tires. It is typically spun into ropes or fabric sheets that can be used as such, or as an ingredient in composite material components.

Kevlar has many applications, ranging from bicycle tires and racing sails to bulletproof vests, due to its high tensile strength-to-weight ratio; by this measure it is five times stronger than steel. It is also used to make modern marching drumheads that withstand high impact, and for mooring lines and other underwater applications. A similar fiber, Twaron, with the same chemical structure was developed by Akzo in the 1970s. Commercial production started in 1986, and Twaron is manufactured by Teijin Aramid.

The term Kevlar is of obscure origin and likely created arbitrarily.

Structure and properties

unit, dashed lines indicate hydrogen bonds. When Kevlar is spun, the resulting fiber has a tensile strength of about , and a relative density of 1.44 (0.052 lb/in 3 ). The polymer owes its high strength to the many inter-chain bonds. These inter-molecular hydrogen bonds form between the carbonyl groups and NH centers. Additional strength is derived from aromatic stacking interactions between adjacent strands.

These interactions have a greater influence on Kevlar than the van der Waals interactions and chain length that typically influence the properties of other synthetic polymers and fibers such as ultra-high-molecular-weight polyethylene. The presence of salts and certain other impurities, especially calcium, could interfere with the strand interactions and care is taken to avoid inclusion in its production. Kevlar's structure consists of relatively rigid molecules which tend to form mostly planar sheet-like structures rather like silk protein.

Thermal properties

Kevlar maintains its strength and resilience down to cryogenic temperatures ( ): in fact, it is slightly stronger at low temperatures. At higher temperatures the tensile strength is immediately reduced by about 10–20%, and after some hours the strength progressively reduces further. For example: enduring for 500 hours, its strength is reduced by about 10%; and enduring for 70 hours, its strength is reduced by about 50%.

Applications

Motor vehicles

Kevlar is sometimes used in structural components of cars, especially high-value performance cars such as the Ferrari F40. The chopped fiber has been used as a replacement for asbestos in brake pads. Aramids such as Kevlar release less airborne fibres than asbestos brakes and do not have the carcinogenic properties associated with asbestos.

Composite materials

Aramid fibers are widely used for reinforcing composite materials, often in combination with carbon fiber and glass fiber. The matrix for high performance composites is usually epoxy resin. Typical applications include monocoque bodies for Formula 1 cars, helicopter rotor blades, tennis, table tennis, badminton and squash rackets, kayaks, cricket bats, and field hockey, ice hockey and lacrosse sticks. Kevlar 149, the strongest fiber and most crystalline in structure, is an alternative in certain parts of aircraft construction. The wing leading edge is one application, Kevlar being less prone than carbon or glass fiber to break in bird collisions.

See also

Innegra S Ultra-high-molecular-weight polyethylene Twaron Vectran

References

External links

Aramids Matweb material properties of Kevlar Kevlar Kevlar in body armor Synthesis of Kevlar Aberfeldy Footbridge over the River Tay Kevlar at Plastics Wiki

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376456096 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

27 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.