Kondo effect

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In physics, the Kondo effect describes the scattering of conduction electrons in a metal due to magnetic impurities, resulting in a characteristic change i.e. a minimum in electrical resistivity with temperature. The cause of the effect was first explained by Jun Kondo, who applied third-order perturbation theory to the problem to account for scattering of s-orbital conduction electrons off d-orbital electrons localized at impurities (Kondo model). Kondo's calculation predicted that the scattering rate and the resulting part of the resistivity should increase logarithmically as the temperature approaches 0 K. Extended to a lattice of magnetic impurities, the Kondo effect likely explains the formation of heavy fermions and Kondo insulators in intermetallic compounds, especially those involving rare earth elements such as cerium, praseodymium, and ytterbium, and actinide elements such as uranium. The Kondo effect has also been observed in quantum dot systems.

In physics, the Kondo effect describes the scattering of conduction electrons in a metal due to magnetic impurities, resulting in a characteristic change i.e. a minimum in electrical resistivity with temperature. The cause of the effect was first explained by Jun Kondo, who applied third-order perturbation theory to the problem to account for scattering of s-orbital conduction electrons off d-orbital electrons localized at impurities (Kondo model). Kondo's calculation predicted that the scattering rate and the resulting part of the resistivity should increase logarithmically as the temperature approaches 0 K. Extended to a lattice of magnetic impurities, the Kondo effect likely explains the formation of heavy fermions and Kondo insulators in intermetallic compounds, especially those involving rare earth elements such as cerium, praseodymium, and ytterbium, and actinide elements such as uranium. The Kondo effect has also been observed in quantum dot systems.

Theory

The dependence of the resistivity \rho on temperature T , including the Kondo effect, is written as \rho(T) = \rho_0 + aT^2 + c_m \ln\frac{\mu}{T} + bT^5, where \rho_0 is the residual resistivity, the term aT^2 shows the contribution from the Fermi liquid properties, and the term bT^5 is from the lattice vibrations: a , b , c_m and \mu are constants independent of temperature. Jun Kondo derived the third term with logarithmic dependence on temperature and the experimentally observed concentration dependence.

History

In 1930, Walther Meissner and B. Voigt observed that the resistivity of nominally pure gold reaches a minimum at 10 K, and similarly for nominally pure Cu at 2 K. Similar results were discovered in other metals. Kondo described the three puzzling aspects that frustrated previous researchers who tried to explain the effect: The resistivity of a truly pure metal is expected to decrease monotonically, because with lower temperature, the probability of electron-phonon scattering decreases. The resistivity should rapidly plateau when the temperature drops below the Debye temperature of the phonons, corresponding with the highest allowed mode of vibration of the metal. However, in the AuFe alloy, the resistivity continues to rise sharply below 0.01 K, yet there seemed to be no energy gap in AuFe alloy that small. The phenomenon is universal, so any explanation should apply in general. Experiments in the 1960s by Myriam Sarachik at Bell Laboratories showed the phenomenon was caused by magnetic impurity in nominally pure metals. When Kondo sent a preview of his paper to Sarachik, Sarachik confirmed the data fit the theory. Kondo's solution was derived using perturbation theory resulting in a divergence as the temperature approaches 0 K. Later methods using non-perturbative techniques refined his result. These improvements produced a finite resistivity, but retained the feature of a resistance minimum at a non-zero temperature. One defines the Kondo temperature as the energy scale limiting the validity of the perturbation results. The Anderson impurity model and accompanying Wilsonian renormalization theory were an important contribution to understanding the underlying physics of the problem. Based on the Schrieffer–Wolff transformation, it was shown that the Kondo model lies in the strong coupling regime of the Anderson impurity model. The Schrieffer–Wolff transformation eliminates the high-energy charge excitations from the Anderson impurity model, obtaining the Kondo model as an effective Hamiltonian. The Kondo effect can be considered as an example of asymptotic freedom, i.e. a situation where the coupling becomes non-perturbatively strong at low temperatures and low energies. In the Kondo problem, the coupling refers to the interaction between the localized magnetic impurities and the itinerant electrons.

References

Further reading

Kondo Effect - 40 Years after the Discovery - special issue of the Journal of the Physical Society of Japan . Monograph by Kondo himself. Monograph on newer versions of the Kondo effect in non-magnetic contexts especially

Text derived from https://en.wikipedia.org/w/index.php?oldid=1360700242 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

10 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.