Kt/V
≈ 7 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In medicine, Kt/V is a number used to quantify hemodialysis and peritoneal dialysis treatment adequacy. * K – dialyzer clearance of urea * t – dialysis time * V – volume of distribution of urea, approximately equal to patient's total body water In the context of hemodialysis, Kt/V is a pseudo-dimensionless number; it is dependent on the pre- and post-dialysis concentration (see below). It is not the product of K and t divided by V, as would be the case in a true dimensionless number. In peritoneal dialysis, it isn't dimensionless at all.
Evidence and sources
It was developed by Frank Gotch and John Sargent as a way for measuring the dose of dialysis when they analyzed the data from the National Cooperative Dialysis Study. In hemodialysis the US National Kidney Foundation Kt/V target is ≥ 1.3, so that one can be sure that the delivered dose is at least 1.2. In peritoneal dialysis the target is ≥ 1.7/week. Despite the name, Kt/V is quite different from standardized Kt/V.
Background
In medicine, Kt/V is a number used to quantify hemodialysis and peritoneal dialysis treatment adequacy. K – dialyzer clearance of urea t – dialysis time V – volume of distribution of urea, approximately equal to patient's total body water In the context of hemodialysis, Kt/V is a pseudo-dimensionless number; it is dependent on the pre- and post-dialysis concentration (see below). It is not the product of K and t divided by V, as would be the case in a true dimensionless number. In peritoneal dialysis, it isn't dimensionless at all.
It was developed by Frank Gotch and John Sargent as a way for measuring the dose of dialysis when they analyzed the data from the National Cooperative Dialysis Study. In hemodialysis the US National Kidney Foundation Kt/V target is ≥ 1.3, so that one can be sure that the delivered dose is at least 1.2. In peritoneal dialysis the target is ≥ 1.7/week. Despite the name, Kt/V is quite different from standardized Kt/V.
K (clearance) multiplied by t (time) is a volume (since mL/min × min = mL, or L/h × h = L), and (K × t) can be thought of as the mL or L of fluid (blood in this case) cleared of urea (or any other solute) during the course of a single treatment. V also is a volume, expressed in mL or L. So the ratio of K × t / V is a so-called "dimensionless ratio" and can be thought of as a multiple of the volume of plasma cleared of urea divided by the distribution volume of urea.
When Kt/V = 1.0, a volume of blood equal to the distribution volume of urea has been completely cleared of urea.
The relationship between Kt/V and the concentration of urea C at the end of dialysis can be derived from the first-order differential equation that describes exponential decay and models the clearance of any substance from the body where the concentration of that substance decreases in an exponential fashion: where C is the concentration [mol/m 3 ] t is the time [s] K is the clearance [m 3 /s] V is the volume of distribution [m 3 ] From the above definitions it follows that \frac{dC}{dt} is the first derivative of concentration with respect to time, i.e. the change in concentration with time.
This equation is separable and can be integrated (assuming K and V are constant) as follows: After integration, where c is the constant of integration If one takes the antilog of equation the result is: {{NumBlk|:| C = e^{- \frac{Kt}{V} + \mathrm{c} } | }} where e is the base of the natural logarithm By integer exponentiation this can be written as: {{NumBlk|:| C = C_0 e^{-\frac{Kt}{V}} | }} where C 0 is the concentration at the beginning of dialysis [mmol/L] or [mol/m 3 ].
The above equation can also be written as Normally we measure postdialysis serum urea nitrogen concentration C and compare this with the initial or predialysis level C 0 . The session length or time is t and this is measured by the clock. The dialyzer clearance K is usually estimated, based on the urea transfer ability of the dialyzer (a function of its size and membrane permeability), the blood flow rate, and the dialysate flow rate.
In some dialysis machines, the urea clearance during dialysis is estimated by testing the ability of the dialyzer to remove a small salt load that is added to the dialysate during dialysis. The URR or Urea reduction ratio is simply the fractional reduction of urea during dialysis. So by definition, URR = 1 − C/C 0 . So 1−URR = C/C 0 .
So by algebra, substituting into equation ( ) above, since , we get: K = 215 mL/min t = 4.0 hours = 240 min V = 70 kg × 0.6 L of water/kg of body mass = 42 L = 42,000 mL Therefore: Kt/V = 1.23 This means that if you dialyze a patient to a Kt/V of 1.23, and measure the postdialysis and predialysis urea nitrogen levels in the blood, then calculate the URR, then −ln(1−URR) should be about 1.23.
The math does not quite work out, and more complicated relationships have been worked-out to account for the fluid removal (ultrafiltration) during dialysis as well as urea generation (see urea reduction ratio).
Nevertheless, the URR and Kt/V are so closely related mathematically, that their predictive power has been shown to be no different in terms of prediction of patient outcomes in observational studies. {{NumBlk|:| \mbox{Weekly } Kt/V = \frac{7 K_D [\mathrm{L}/\mbox{day}]}{V [\mathrm{L}]}. | }} C_{B\mbox{ mean}}=22.817\mbox{ mmol/L} C_{D}=17.524\mbox{ mmol/L} V_{D}=3.75\mbox{ L per exchange or }15\mbox{ L/day} V_{B}=40.6\ \mathrm{L} Then by equation , K D is: or 8.00 mL/min or 11.52 L/d.
Kt/V and the weekly Kt/V by equations and respectively are thus: 0.45978 and 1.9863. As an example, if someone is infusing four 2 liter exchanges a day, and drains out a total of 9 liters per day, then they drain 9 × 7 = 63 liters per week. If the patient has an estimated total body water volume V of about 35 liters, then the weekly Kt/V would be 63/35, or about 1.8. The above calculation is limited by the fact that the serum concentration of urea is changing during dialysis.
So ideally this should not be used as it has not taken in account the urea level in dialysate or serum...so it cannot be labelled as urea clearance In automated PD this change cannot be ignored; thus, blood samples are usually measured at some time point in the day and assumed to be representative of an average value. The clearance is then calculated using this measurement. Kt/V and the adequacy of hemodialysis – UpToDate.com
Text derived from https://en.wikipedia.org/w/index.php?oldid=1321110539 under CC BY-SA 4.0; modifications have been made.