{
  "id": "kvm-switch-095220-6148a28cdeb48e10",
  "slug": "kvm-switch",
  "title": "KVM switch",
  "qid": "Q828426",
  "lead": "KVM switch showing console and computer ports for DVI video, USB (keyboard/mouse) and analog audio A KVM switch (with KVM being an abbreviation for \"keyboard, video, and mouse\") is a hardware device that allows a user to control multiple computers from one or more sets of keyboards, video monitors, and mice.",
  "body": "KVM switch showing console and computer ports for DVI video, USB (keyboard/mouse) and analog audio A KVM switch (with KVM being an abbreviation for \"keyboard, video, and mouse\") is a hardware device that allows a user to control multiple computers from one or more sets of keyboards, video monitors, and mice. USB keyboards, mice, and I/O devices are the most common devices connected to a KVM switch. The classes of KVM switches discussed below are based on different types of core technologies, which vary in how the KVM switch handles USB I/O devices—including keyboards, mice, touchscreen displays, etc. (USB-HID = USB human interface device) USB hub-based KVM Also called an Enumerated KVM switch or USB switch selector, a connected/shared USB device must go through the full initiation process (USB enumeration) every time the KVM is switched to another target system/port. The switching to different ports is similar to the process of physically plugging and unplugging a USB device into the targeted system. Emulated USB KVM Dedicated USB console port(s) are assigned to emulate special sets of USB keyboard or mouse switching control information to each connected/targeted system. Emulated USB provides an instantaneous and reliable switching action that makes keyboard hotkeys and mouse switching possible. However, this class of KVM switch only uses generic emulations and consequently has only been able to support the most basic keyboard and mouse features. There are also USB KVM devices that allow cross-platform operating systems and basic keyboard and mouse sharing. Semi-DDM USB KVM Dedicated USB console port(s) work with all USB-HID (including keyboard and mouse), but do not maintain the connected devices' presence to all of the targeted systems simultaneously. This class of KVM takes advantage of DDM (Dynamic Device Mapping) technology. DDM USB KVM Dedicated Dynamic Device Mapping USB console port(s) work with all USB-HID (including keyboard and mouse) and maintain the connected devices' special functions and characteristics to each connected/targeted system. This class of KVM switch overcomes the frustrating limitations of an Emulated USB Class KVM by emulating the true characteristics of the connected devices to all the computers simultaneously. This means that it is now possible to use the extra function keys, wheels, buttons, and controls that are commonly found on modern keyboards and mice. KVM+Dock A KVM switch with built-in docking station. It combines two devices, a KVM switch and a docking station. The customer expectations for this kind of product has increased due to a rising number of work-from-home setups that need to share user I/O devices between a personal PC and work laptop as a consequence of COVID pandemic restrictions. Limited*:supported, but does not allow USB re-enumeration, which not only causes long delays in switching, but also sometimes causes HPD (Hot-Plug Device) errors to the OS system(s). Yes*:Latency time within 1 second while switching between channels/ports. ==Video bandwidth== While HDMI, DisplayPort, and DVI switches have been manufactured, VGA is still the most common video connector found with KVM switches for industrial applications and manufacturing applications, although many switches are now compatible with HDMI and DisplayPort connectors. Analogue switches can be built with varying capacities for video bandwidth, affecting the unit's overall cost and quality. A typical consumer-grade switch provides up to 200&nbsp;MHz bandwidth, allowing for high-definition resolutions at 60&nbsp;Hz. For analog video, resolution and refresh rate are the primary factors in determining the amount of bandwidth needed for the signal. The method of converting these factors into bandwidth requirements is a point of ambiguity, in part because it is dependent on the analogue nature and state of the hardware. The same piece of equipment may require more bandwidth as it ages due to increased degradation of the source signal. Most conversion formulas attempt to approximate the amount of bandwidth needed, including a margin of safety. As a rule of thumb, switch circuitry should provide up to three times the bandwidth required by the original signal specification, as this allows most instances of signal loss to be contained outside the range of the signal that is pertinent to picture quality. As CRT-based displays are dependent on refresh rate to prevent flickering, they generally require more bandwidth than comparable flat panel displays. ==Monitor== A monitor uses DDC and EDID, transmitted through specific pins, to identify itself to the system. KVM switches may have different ways of handling these data transmissions: None: the KVM switch lacks the circuitry to handle this data, and the monitor is not \"visible\" to the system. The system may assume a generic monitor is attached and defaults to safe settings. Higher resolutions and refresh rates may need to be manually unlocked through the video driver as a safety precaution. However, certain applications (especially games) that depend on retrieving DDC/EDID information will not be able to function correctly. Fake: the KVM switch generates its own DDC/EDID information that may or may not be appropriate for the monitor that is attached. Problems may arise if there is an inconsistency between the KVM's specifications and the monitor's, such as not being able to select desired resolutions. Pass-through: the KVM switch attempts to make communication between the monitor and the system transparent. However, it may fail to do so in the following ways: generating Hot Plug Detect (HPD) events for monitor arrival or removal upon switching, or not passing monitor power states - may cause the OS to re-detect the monitor and reset the resolution and refresh rate, or may cause the monitor to enter or exit power-saving mode; not passing or altering MCSS commands - may result in incorrect orientation of the display or improper color calibration. Microsoft guidelines recommend that KVM switches pass unaltered any I 2 C traffic between the monitor and the PC hosts, and do not generate HPD events upon switching to a different port while maintaining a stable non-noise signal on inactive ports. ==Remote KVM extenders== There are two types of remote KVM extenders that are best described as local remote and KVM over IP. ===Local remote (including KVM over USB)=== Local remote KVM extender design allows users to control computer equipment up to away from the user consoles (keyboard, monitor and mouse). They require a direct cable connection from the computer to the KVM extender to the console and include support for standard category 5 cabling between computers and users interconnected by the extender. In contrast, USB powered KVM extenders are able to control computer equipment using a combination of USB, keyboard, mouse and monitor cables of up to . === KVM over IP (IPKVM)=== KVM switch over IP extenders use a dedicated microcontroller and potentially specialized video capture hardware to capture the video, keyboard, and mouse signals, compress and convert them into packets, and send them over an Ethernet link to a remote console application that unpacks and reconstitutes the dynamic graphical image. The KVM over IP subsystem is typically connected to a system's standby power plane so that it's available during the entire BIOS boot process. These extender devices allow multiple computers to be controlled locally or globally with the use of an IP connection. There are performance issues related to LAN/WAN hardware, standard protocols and network latency, so user management is commonly referred to as \"near real time\". Access to most remote or \"KVM\" over IP extenders today use a web browser, although many of the stand-alone viewer software applications provided by many manufacturers are also reliant on ActiveX or Java. ==References==",
  "categories": [
    "105405089",
    "108806028",
    "22896304",
    "22911575",
    "22937996",
    "23603337",
    "23617849",
    "24032884",
    "24043274",
    "24709418",
    "24745121",
    "24745122",
    "26220375",
    "26748027",
    "28269686",
    "28587062",
    "55067140"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378742548",
  "content_hash": "6148a28cdeb48e10fd3202920f7238ae09b1ba3cf636df163a99a43a115125a8",
  "created_at": 1792308945.8743036,
  "updated_at": 1791238550.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "kvm-switch-095220-6148a28cdeb48e10",
    "type": "webpage",
    "title": "KVM switch",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/kvm-switch",
    "issued": {
      "date-parts": [
        [
          2026,
          10,
          18
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          20
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:kvm-switch-095220-6148a28cdeb48e10",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1378742548",
    "note": "Immutable snapshot kvm-switch-095220-6148a28cdeb48e10, content root 6148a28cdeb48e10…"
  }
}