Kylesku Bridge

The Kylesku Bridge (officially known since 2019 by its Gaelic name Drochaid a' Chaolais Chumhaing ) is a distinctively curved concrete box girder bridge in northwest Scotland that crosses Caolas Cumhann (Gaelic for "narrow strait"…

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Kylesku Bridge (officially known since 2019 by its Gaelic name Drochaid a' Chaolais Chumhaing ) is a distinctively curved concrete box girder bridge in northwest Scotland that crosses Caolas Cumhann (Gaelic for "narrow strait", pronounced "Kyles Cuan"); the channel that connects Loch Glencoul and Loch Glendhu with Loch a' Chàirn Bhàin in Sutherland. It is listed as category A, the highest grade.

History

In June 1978, the Highland Regional Council asked Ove Arup & Partners Scotland to prepare a feasibility study for a bridge, in their capacity as consulting civil engineers, and it was prepared by March 1979. Construction for the approach roads, costing £4 million, began in summer 1981.

Construction of the bridge began in August 1982, with Morrison Construction and Lehane, Mackenzie and Shand the chief contractors. It was constructed by building out the supporting legs and then lifting into place the central span, which weighed . The cost of the bridge was £4 million, although was earlier budgeted at £2.75 million.

The bridge opened to traffic in July 1984, and was formally opened by the Queen on 8 August 1984. In 2019, the bridge was classified by Historic Environment Scotland as a Category A structure, recognising it as "visually striking and technically innovative". It was also officially renamed to the Gaelic translation of its name, Drochaid a' Chaolais Chumhaing.

Geography

The bridge crosses water which is approximately wide and up to deep, leading to fast tidal currents. It replaced the ferry between Kylesku and Kylestrome, which was approximately to the east.

Design

The bridge is long with a main span. The bridge deck is at a height of above high water to provide navigation for ships. The bridge deck is supported by V-shaped inclined piers, with eight inclined legs, in order to reduce the length of the main span.

The lateral forces from each leg balance, so the total force on the foundations is vertically downwards. The spread of legs supports the bridge in winds which can exceed , and also loads resulting from the curvature of the bridge.

There is no joint between the legs and the deck of the bridge, with the expansion joints and bearings being located at the abutments to facilitate straightforward maintenance. The legs are formed from reinforced concrete and the deck from prestressed concrete using cables tensioned at up to 52,200 kN.

The bridge is designed to be sympathetic to the surrounding country, and the approaches were chosen to minimise changes to the landscape.

See also

List of bridges in Scotland

Construction at night

Video clips

Aerial view in 2012 View in 2009 Former ferry in 1966

Text derived from https://en.wikipedia.org/w/index.php?oldid=1363467175 under CC BY-SA 4.0; modifications have been made.

Words in each sectionHistoryHistoryHistory: 162 words162DesignDesignDesign: 158 words158Video clipsVideo clipsVideo clips: 32 words32GeographyGeographyGeography: 31 words31See alsoSee alsoSee also: 5 words5
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001363467175 · captured 2026-07-10 · ledger · version history

Cite this page as: encyclopegia.org, “Kylesku Bridge”, snapshot enwiki-001363467175. https://encyclopegia.org/a/kylesku-bridge

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.