L3enc
Fraunhofer l3enc was the first public software able to encode pulse-code modulation (PCM) .wav files to the MP3 format.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Fraunhofer l3enc was the first public software able to encode pulse-code modulation (PCM) .wav files to the MP3 format. The first public version was released on July 13, 1994. This command-line tool was shareware and limited to 112 kbit/s. l3enc fit on a single 3.5" floppy.
It was available for MS-DOS, Linux, Solaris, SunOS, NeXTstep and IRIX. A licence that allowed full use (encoding up to 320 kbit/s) cost 350 Deutsche Mark, or about $250 (US). Fraunhofer l3dec was the first public software able to decode the MP3 format.
Since the release in September 1995 of Fraunhofer WinPlay3, the first real-time MP3 software player, people were able to store and play back MP3 files on PCs. WinPlay3 fit on a single 3.5" floppy. For full playback quality (stereo) one would have needed to meet the minimum requirements of a 486DX4/100 processor.
By the end of 1997 l3enc stopped being developed in favour of its successor MP3enc. Development of MP3enc stopped in late 1998 to favour development of a parallel branch FhG had been developing for some time, called Fastenc. None of these programs are still marketed.
Fraunhofer l3enc was the first public software able to encode pulse-code modulation (PCM) .wav files to the MP3 format. The first public version was released on July 13, 1994. This command-line tool was shareware and limited to 112 kbit/s. l3enc fit on a single 3.5" floppy.
It was available for MS-DOS, Linux, Solaris, SunOS, NeXTstep and IRIX. A licence that allowed full use (encoding up to 320 kbit/s) cost 350 Deutsche Mark, or about $250 (US). Fraunhofer l3dec was the first public software able to decode the MP3 format.
Since the release in September 1995 of Fraunhofer WinPlay3, the first real-time MP3 software player, people were able to store and play back MP3 files on PCs. WinPlay3 fit on a single 3.5" floppy. For full playback quality (stereo) one would have needed to meet the minimum requirements of a 486DX4/100 processor.
By the end of 1997 l3enc stopped being developed in favour of its successor MP3enc. Development of MP3enc stopped in late 1998 to favour development of a parallel branch FhG had been developing for some time, called Fastenc. None of these programs are still marketed.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1297411847 under CC BY-SA 4.0; modifications have been made.
References
1 claim could not be tied to a specific sentence and is listed in the table below instead.