Lesson plan
Latten
Historically, the term "latten" referred loosely to the copper alloys such as brass or bronze that appeared in the Middle Ages and through to the late-18th and early-19th centuries. Such alloys were used for monumental brasses, in decorative effects on borders, rivets or other details of metalwork (particularly armour), in livery and pilgrim badges or funerary effigies. Latten commonly contained varying amounts of copper, tin, zinc and lead, giving it characteristics of both brass and bronze. Metalworkers commonly formed latten in thin sheets and used it to make church utensils. Brass of this period is made through the calamine brass process, from copper and zinc ore. (Later brass was made with zinc metal from Champion's smelting process and is not generally referred to as "latten".) This calamine brass was generally manufactured as hammered sheet or "battery brass" (hammered by a "battery" of water-powered trip hammers), and cast brass was rare. "Latten" also refers to a type of tin plating on iron (or possibly some other base metal), which is known as white latten; and black latten refers to laten-brass, which is brass milled into thin plates or sheets. The term "latten" has also been used, rarely, to refer to lead alloys. In general, metal in thin sheets is characterised as "latten", e.g.…
Article summary
Historically, the term "latten" referred loosely to the copper alloys such as brass or bronze that appeared in the Middle Ages and through to the late-18th and early-19th centuries. Such alloys were used for monumental brasses, in decorative effects on borders, rivets or other details of metalwork (particularly armour), in livery and pilgrim badges or funerary effigies. Latten commonly contained varying amounts of copper, tin, zinc and lead, giving it characteristics of both brass and bronze. Metalworkers commonly formed latten in thin sheets and used it to make church utensils. Brass of this period is made through the calamine brass process, from copper and zinc ore. (Later brass was made with zinc metal from Champion's smelting process and is not generally referred to as "latten".) This calamine brass was generally manufactured as hammered sheet or "battery brass" (hammered by a "battery" of water-powered trip hammers), and cast brass was rare. "Latten" also refers to a type of tin plating on iron (or possibly some other base metal), which is known as white latten; and black latten refers to laten-brass, which is brass milled into thin plates or sheets. The term "latten" has also been used, rarely, to refer to lead alloys. In general, metal in thin sheets is characterised as "latten", e.g.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.