LB&SCR E2 class
≈ 7 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of ten steam locomotives designed by Lawson Billinton, generally employed for shunting, piloting duties in Victoria station, empty-stock duties and local goods trains. Introduced in 1913, the E2 class were the first of Billinton's own designs for the LB&SCR, built to replace some of the early Stroudley E1 goods engines. With the advantage of improved boiler feeds the E2 class were less restricted in their activities than the E1 class. However, the first five members of the class suffered from inadequate water capacity. Despite this, this class was a success as shunters and local goods traffic, therefore a second batch of another five slightly modified ones was built.
The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of ten steam locomotives designed by Lawson Billinton, generally employed for shunting, piloting duties in Victoria station, empty-stock duties and local goods trains. Introduced in 1913, the E2 class were the first of Billinton's own designs for the LB&SCR, built to replace some of the early Stroudley E1 goods engines. With the advantage of improved boiler feeds the E2 class were less restricted in their activities than the E1 class. However, the first five members of the class suffered from inadequate water capacity. Despite this, this class was a success as shunters and local goods traffic, therefore a second batch of another five slightly modified ones was built.
History
Background
No. 89 as rebuilt by Marsh as a prototype for the E2 class.]] The Stroudley E1 class, built from 1874 to 1891, were used as station pilots and on short-distance goods trains on the LB&SCR, with the class eventually replaced by the E3 class of 1894, designed by Stroudley's successor, R. J. Billinton, father of L. B. Billinton, based on the prototype E3 class No. 158 West Brighton, designed as an 0-6-2T in 1891. The E3 radial tanks were beneficial on most goods trains except the heaviest, with their small wheels limiting their usefulness on suburban passenger services. The E3 class were succeeded by larger and more powerful locomotives such as the E4, E5, and E6 classes. With retirements of the older E1 engines beginning in 1908. R. J. Billinton was succeeded as Locomotive Superintendent by D. E. Marsh in 1904. By 1910, many of the E1 class were worn out and insufficient for the heavier duties now required of them. The LB&SCR had been aware for some years that the E1 class were nearing the end of their serviceability, not due to mechanical failure, but because the local goods and shunting duties they were used on so successfully were becoming too heavy. One of Marsh's last acts was to rebuild E1 class No. 89 Brest at Brighton works, classified as E1X class, forming the prototype of the later E2 class. Marsh had always been reluctant to scrap rolling stock, often choosing to reboiler or otherwise renew engines, L. B. Billinton, however, having succeeded Marsh in 1911, firmly believed that older locomotives needed to be scrapped and replaced with more modern, larger machines. Marsh's rebuild of No. 89 Brest included a larger boiler (to the same design as that of the D1X class), extended water tanks and coal bunker, a new cab, and steam sanding installed. Marsh had intended to rebuild further E1 class to E1X, but was unexpectedly forced to retire, citing poor health, however, irregularities in his accounting had been discovered shortly before his departure.
Design and construction
(SR) ownership.]] By November 1911, L. B. Billinton was advised that a class of 20 local goods and shunting locomotives should be built by way of renewing older designs. Billinton, preferring to build new designs, designed and ordered five new 0-6-0T tank engines by October 1912 from Brighton works at a cost of £2,010 each, and at the same time set a side a similar number of E1 class for withdrawal. The class included several features found on other LB&SCR classes, such as an I2 class boiler producing 170 psi (1.17 MPa), modified to accommodate a Weir pump and hot water injector for use with high-pressure steam, the cylinders and motion were from the B4 class, but reduced to 17 ½ inches. Billinton was persuaded that no advantages would accrue from superheating small tank engines intended for local goods or shunting operations, and thus considered superheating a wasteful extra expense resulting in added maintenance. The E2 class had slotted frames, with the running board featuring a curved drop towards each - which became a staple of Billinton's designs, six small wheels of in diameter, the tanks had a water capacity of with a weight of 52 ¾ long tons (52,750 kg). Five engines were built to the original design with short side tanks, numbered 100 to 104, entering service between May and December 1913. The E2 class were more powerful than the E1 class which they replaced, with the advantage of improved boiler feeds, giving them broader availability. However, the initial five engines were handicapped by their small water capacity. The first three engines, Nos. 100-102, were equipped with a reverser handle, whilst the last two, Nos. 103-104, were fitted with a screw-and-handle system. Though occupied with the introduction of the K and L classes, Billinton, with approval sanctioned by the board in March 1914, ordered five more from Brighton at a cost of £2217 per locomotive. However, as a result of World War I, construction was delayed, resulting in the final member of the E2 class, No. 109, not being completed until late 1916. Because of the small water capacity on the first five engines, Billinton gave the next batch of five engines, Nos. 105-109, extended side tanks, increasing water capacity increased by 166 gallons, totalling . The second batch had the bottom at the front cut out to give access to the motion, as to extend their range without having to take on water, the overall length of the engines was also extended by 3 ½ inches (8,89 cm), and air assisted screw-and-handle reversing fitted to aid with shunting and allow the engines to work passenger trains. The weight distribution of the wheels of the second batch had alterations in addition to the extended tanks; their weight increased to .
In popular culture
In 1946, Alexander Reginald Payne used the later series of E2 locomotives with the extended side tanks as the basis for the character Thomas the Tank Engine in the second book of The Railway Series by the Rev. W. Awdry.
OO gauge models
Hornby produced the locomotive in its earliest form as an OO gauge model. Production lasted from 1979 to 1985 in three distinct variants with four reference numbers.
References
Bibliography
External links
LB&SCR online, E2 class Southern E-Group – LB&SCR E2 Class page Southern E-Group-Picture Gallery Southern E-Group Loco Notes Southern E-Group Loco Notes-2 Steam Locomotives 1920s
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377843017 under CC BY-SA 4.0; modifications have been made.