Lesson plan

LCM (2)

The Landing Craft, Mechanized Mark 2 or LCM (2) was a landing craft used for amphibious landings early in the United States' involvement in the Second World War. Though its primary purpose was to transport light tanks from ships to enemy-held shores, it was also used to carry guns and stores. The craft was designed by the Navy's Bureau of Construction and Repair and the initial production contract was let to the American Car & Foundry Company. A total of 147 were built by this company and Higgins Industries. Because of its light load capacity and the rapid production of the superseding LCM (3), the LCM (2) quickly fell out of use following the Allied invasion of North Africa in 1942. Constructed of steel, this shallow-draft, barge-like boat could ferry a small armored vehicle to shore at 7.5 knots (17 km/h). The craft was generally carried on the deck of a transport ship and then lowered into the water, a few miles from its objective, by crane or derrick. The cargo was then placed into the craft by crane or derrick. Once the LCM (2) had touched down on shore, the hinged ramp at the bow of the craft was lowered and the tank left the craft over the ramp under its own power.

Back to article

Article summary

The Landing Craft, Mechanized Mark 2 or LCM (2) was a landing craft used for amphibious landings early in the United States' involvement in the Second World War. Though its primary purpose was to transport light tanks from ships to enemy-held shores, it was also used to carry guns and stores. The craft was designed by the Navy's Bureau of Construction and Repair and the initial production contract was let to the American Car & Foundry Company. A total of 147 were built by this company and Higgins Industries. Because of its light load capacity and the rapid production of the superseding LCM (3), the LCM (2) quickly fell out of use following the Allied invasion of North Africa in 1942. Constructed of steel, this shallow-draft, barge-like boat could ferry a small armored vehicle to shore at 7.5 knots (17 km/h). The craft was generally carried on the deck of a transport ship and then lowered into the water, a few miles from its objective, by crane or derrick. The cargo was then placed into the craft by crane or derrick. Once the LCM (2) had touched down on shore, the hinged ramp at the bow of the craft was lowered and the tank left the craft over the ramp under its own power.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.