LDraw

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

LDraw is a system of freeware tools and a 3D graphics file format standard for modeling Lego creations.

LDraw is a system of freeware tools and a 3D graphics file format standard for modeling Lego creations.

File format

LDraw file format describes "part" (representation of Lego brick) as a set of geometric primitives ("p") in a form of polygonal triangulated mesh. LDraw "models" consists of LDraw "parts", same way as Lego models consists of Lego bricks. LDraw file format is plain text file format, and uses comma-separated syntax definition of values. 0 Brick 2 x 2 0 Name: 3003.dat 0 Author: James Jessiman 0 !LDRAW_ORG Part UPDATE 2002-03 0 !LICENSE Redistributable under CCAL version 2.0 : see CAreadme.txt 0 BFC CERTIFY CCW 0 !HISTORY 2001-10-26 [PTadmin] Official Update 2001-01 0 !HISTORY 2002-05-07 [unknown] BFC Certification 0 !HISTORY 2002-06-11 [PTadmin] Official Update 2002-03 0 !HISTORY 2007-05-07 [PTadmin] Header formatted for Contributor Agreement 0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01 1 16 0 4 0 1 0 0 0 -5 0 0 0 1 stud4.dat 0 BFC INVERTNEXT 1 16 0 24 0 16 0 0 0 -20 0 0 0 16 box5.dat 4 16 20 24 20 16 24 16 -16 24 16 -20 24 20 4 16 -20 24 20 -16 24 16 -16 24 -16 -20 24 -20 4 16 -20 24 -20 -16 24 -16 16 24 -16 20 24 -20 4 16 20 24 -20 16 24 -16 16 24 16 20 24 20 1 16 0 24 0 20 0 0 0 -24 0 0 0 20 box5.dat 1 16 10 0 10 1 0 0 0 1 0 0 0 1 stud.dat 1 16 -10 0 10 1 0 0 0 1 0 0 0 1 stud.dat 1 16 10 0 -10 1 0 0 0 1 0 0 0 1 stud.dat 1 16 -10 0 -10 1 0 0 0 1 0 0 0 1 stud.dat The above code defines the basic 2×2 brick. It consists of a five-sided box (box5.dat, outside) and an inverted five-sided box (inside), the connection between those two, consisting of four quads (the four lines starting with 4), the four studs on top of it (stud.dat) and the long hollow stud in the inside (stud4.dat). All lines in an LDraw file are either empty or start with a command number, where 0 means no command (though over time, some lines starting with 0 followed by specific text in capitals also got a meaning as meta commands). The command 1 for example includes a subfile. It specifies the file's path and a transformation matrix that should be applied to it, as well as its color (where 16 means "use the color that was used when including the current file"). Command 4 specifies a four-sided polygon. There are also commands that define 2D lines. Such lines give the parts a clear contour even in non-shaded orthographic renderings. 0 Example Pyramid for Demonstration of LDRAW Library 0 Name: pyramid.ldr 0 Author: James Jessiman 1 1 -40 -24 60 1 0 0 0 1 0 0 0 1 3001.dat 1 1 40 -24 60 1 0 0 0 1 0 0 0 1 3001.dat 1 1 60 -24 0 0 0 1 0 1 0 -1 0 0 3001.dat 1 1 40 -24 -60 1 0 0 0 1 0 0 0 1 3001.dat 1 1 -40 -24 -60 1 0 0 0 1 0 0 0 1 3001.dat 1 1 -60 -24 0 0 0 1 0 1 0 -1 0 0 3001.dat 0 STEP 1 4 -20 -48 40 1 0 0 0 1 0 0 0 1 3001.dat 1 4 40 -48 20 0 0 1 0 1 0 -1 0 0 3001.dat 1 4 20 -48 -40 1 0 0 0 1 0 0 0 1 3001.dat 1 4 -40 -48 -20 0 0 1 0 1 0 -1 0 0 3001.dat 0 STEP 1 14 0 -72 20 1 0 0 0 1 0 0 0 1 3001.dat 1 14 0 -72 -20 1 0 0 0 1 0 0 0 1 3001.dat 0 STEP 1 0 0 -96 0 1 0 0 0 1 0 0 0 1 3003.dat 0 STEP

Text derived from https://en.wikipedia.org/w/index.php?oldid=1376815686 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

25 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.