Lead frame

A lead frame (pronounced ) is a metal structure inside a chip package that carries signals from the die to the outside, used in DIP, QFP and other packages where connections to the chip are made on its edges.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A lead frame (pronounced /lid/ LEED) is a metal structure inside a chip package that carries signals from the die to the outside, used in DIP, QFP and other packages where connections to the chip are made on its edges.

The lead frame consists of a central die pad, where the die is placed, surrounded by leads, metal conductors leading away from the die to the outside world. The end of each lead closest to the die ends in a bond pad. Small bond wires connect the die to each bond pad. Mechanical connections fix all these parts into a rigid structure, which makes the whole lead frame easy to handle automatically.

Manufacturing

edit edit source

Lead frames are manufactured by removing material from a flat plate of copper, copper-alloy, or iron-nickel alloy like alloy 42. Two processes used for this are etching (suitable for high density of leads), or stamping (suitable for low density of leads).[1] The mechanical bending process can be applied after both techniques.[2] A lead frame has two sections: a die paddle, where the die sits in the leadframe, and the leads. The leadframe is made of an alloy the molding compound can adhere to, a thermal expansion coefficient that is as close as possible to that of the die and compound, has good thermal and electrical conductivity, is strong enough and has high formability.[3]

The die is glued or soldered to the die pad inside the lead frame, and then bond wires are attached between the die and the bond pads to connect the die to the leads in a process called wire bonding. In a process called encapsulation, a plastic case is moulded around the lead frame and die, exposing only the leads. The leads are cut off outside the plastic body and any exposed supporting structures are cut away. The external leads are then bent to the desired shape.

Uses

edit edit source

Amongst others, lead frames are used to manufacture a quad flat no-leads package (QFN), a quad flat package (QFP), or a dual in-line package (DIP).

Advances in lead frame technology have allowed better packing techniques like routable lead frame technology [4] that allow improved thermal and electrical performance.

See also

edit edit source

References

edit edit source
  1. ^ Electronic Materials Handbook: Packaging. ASM International. November 1989. ISBN 978-0-87170-285-2. Wikipedia revision 1349522568, retrieved 2026-11-18
  2. ^ "Advanced Lead Frame Services— From Design to Delivery" (PDF). Archived from the original (PDF) on 2016-03-04. Retrieved 2014-04-09. Wikipedia revision 1349522568, retrieved 2026-11-18
  3. ^ "Lead Frames or Leadframes - Page 1 of 2". Wikipedia revision 1349522568, retrieved 2026-11-18
  4. ^ "Unlock improved power module thermal performance with TPSM53604 and Enhanced HotRod QFN packaging". Texas Instruments. Wikipedia revision 1349522568, retrieved 2026-11-18
Semiconductor packagesSingle diode
  • DO-201 (DO-27)
  • DO-204 (DO-7 / DO-26 / DO-35 / DO-41)
  • DO-213 (MELF / SOD-80 / LL34)
  • DO-214 (SMA / SMB / SMC)
  • SOD (SOD-123 / SOD-323 / SOD-523 / SOD-923)
3...5-pin Single row Dual row Quad row Grid array Wafer Related topics It is relatively common to find packages that contain other components than their designated ones, such as diodes or voltage regulators in transistor packages, etc.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1349522568 under CC BY-SA 4.0; modifications have been made.