Leidenfrost effect
The Leidenfrost effect or film boiling is a physical phenomenon in which a liquid, close to a solid surface of another body that is significantly hotter than the liquid's boiling point, produces an insulating vapor layer that keeps the…
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Leidenfrost effect or film boiling is a physical phenomenon in which a liquid, close to a solid surface of another body that is significantly hotter than the liquid's boiling point, produces an insulating vapor layer that keeps the liquid from boiling rapidly. Because of this repulsive force, a droplet hovers over the surface, rather than making physical contact with it.
The effect is named after the German doctor Johann Gottlob Leidenfrost, who described it in A Tract About Some Qualities of Common Water. This is most commonly seen when cooking, when drops of water are sprinkled onto a hot pan.
If the pan's temperature is at or above the Leidenfrost point, which is approximately for water, the water skitters across the pan and takes longer to evaporate than it would take if the water droplets had been sprinkled onto a cooler pan. {{\frac{q}{A}}_{min}}=C{{h}_{fg}}{{\rho }_{v}}{{\left[ \frac{\sigma g\left( {{\rho }_{L}}-{{\rho }_{v}} \right)}{{{\left( {{\rho }_{L}}+{{\rho }_{v}} \right)}^{2}}} \right]}^{{}^{1}\!\!\diagup\!\!{}_{4}\;}} where the properties are evaluated at saturation temperature. Zuber's constant, C , is approximately 0.09 for most fluids at moderate pressures. h=C{{\left[ \frac{k_{v}^{3}{{\rho }_{v}}g\left( {{\rho }_{L}}-{{\rho }_{v}} \right)\left( {{h}_{fg}}+0.4{{c}_{pv}}\left( {{T}_{s}}-{{T}_{sat}} \right) \right)}{{{D}_{o}}{{\mu }_{v}}\left( {{T}_{s}}-{{T}_{sat}} \right)} \right]}^{{}^{1}\!\!\diagup\!\!{}_{4}\;}} where {{D}_{o}} is the outside diameter of the tube.
The correlation constant C is 0.62 for horizontal cylinders and vertical plates, and 0.67 for spheres. Vapor properties are evaluated at film temperature.
For stable film boiling on a horizontal surface, Berenson has modified Bromley's equation to yield, h=0.425{{\left[ \frac{k_{vf}^{3}{{\rho }_{vf}}g\left( {{\rho }_{L}}-{{\rho }_{v}} \right)\left( {{h}_{fg}}+0.4{{c}_{pv}}\left( {{T}_{s}}-{{T}_{sat}} \right) \right)}{{{\mu }_{vf}}\left( {{T}_{s}}-{{T}_{sat}} \right)\sqrt{\sigma /g\left( {{\rho }_{L}}-{{\rho }_{v}} \right)}} \right]}^{{}^{1}\!\!\diagup\!\!{}_{4}\;}} For vertical tubes, Hsu and Westwater have correlated the following equation, h{{\left[ \frac{\mu _{v}^{2}}{g{{\rho }_{v}}\left( {{\rho }_{L}}-{{\rho }_{v}} \right)k_{v}^{3}} \right]}^{{}^{1}\!\!\diagup\!\!{}_{3}\;}}=0.0020{{\left[ \frac{4m}{\pi {{D}_{v}}{{\mu }_{v}}} \right]}^{0.6}} where m is the mass flow rate in l{{b}_{m}}/hr at the upper end of the tube. At excess temperatures above that at the minimum heat flux, the contribution of radiation becomes appreciable, and it becomes dominant at high excess temperatures.
The total heat transfer coefficient is thus a combination of the two. Bromley has suggested the following equations for film boiling from the outer surface of horizontal tubes: {{h}^{{}^{4}\!\!\diagup\!\!{}_{3}\;}}={{h}_{conv}}^{{}^{4}\!\!\diagup\!\!{}_{3}\;}+{{h}_{rad}}{{h}^{{}^{1}\!\!\diagup\!\!{}_{3}\;}} If {{h}_{rad}} , h={{h}_{conv}}+\frac{3}{4}{{h}_{rad}} The effective radiation coefficient, {{h}_{rad}} can be expressed as, {{h}_{rad}}=\frac{\varepsilon \sigma \left( T_{s}^{4}-T_{sat}^{4} \right)}{\left( {{T}_{s}}-{{T}_{sat}} \right)} where \varepsilon is the emissivity of the solid and \sigma is the Stefan–Boltzmann constant.
High speed photography of the reactive Leidenfrost effect of cellulose on porous surfaces (macroporous alumina) was also shown to suppress the reactive Leidenfrost effect and enhance overall heat transfer rates to the particle from the surface. The new phenomenon of a 'reactive Leidenfrost (RL) effect' was characterized by a dimensionless quantity, (φ RL = τ conv /τ rxn ), which relates the time constant of solid particle heat transfer to the time constant of particle reaction, with the reactive Leidenfrost effect occurring for 10 −1 RL +1 .
The reactive Leidenfrost effect with cellulose will occur in numerous high temperature applications with carbohydrate polymers, including biomass conversion to biofuels, preparation and cooking of food, and tobacco use. The Leidenfrost effect has also been used as a means to promote chemical change of various organic liquids through their conversion by thermal decomposition into various products.
Examples include decomposition of ethanol, diethyl carbonate, and glycerol.
In popular culture
In Jules Verne's 1876 book Michael Strogoff, the protagonist is saved from being blinded with a hot blade by evaporating tears. In the 2009 season 7 finale of MythBusters, "Mini Myth Mayhem", the team demonstrated that a person can wet their hand and briefly dip it into molten lead without injury, using the Leidenfrost effect as the scientific basis.
In the 4th episode of the 2014 Anime Aldnoah.Zero, The Leidenfrost Effect is invoked when metallic projectiles make contact with an extremely hot plasma, causing the projectiles to veer wildly from their course. The tips of these projectiles nigh instantly melt, insulating the following mass of the projectile and creating erratic deviations in flight.
The scenario may not be entirely plausible to attribute to the Leidenfrost Effect due to the non-standard setup of the masses involved. "When Water Flows Uphill" – Science Friday with Univ. of Bath professor Kei Takashina Carolyn Embach, ResearchGate: English translation of Johan Gottlob Leidenfrost, De aquae communes nonnullis qualitatibus tractatus, Duisburg on Rhine, 1756.
(Carolyn S. E. Wares aka Carolyn Embach, translator, 1964)
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373203162 under CC BY-SA 4.0; modifications have been made.