Lens

Uses your system voice; voice and rate in settings.

Q16816200Snapshot

≈ 22 min read

Names in other languages

  • aaLens
  • aceLens
  • aeb-latnLens
  • afLens
  • akLens
  • alnLens
  • anLens
  • angLens
  • EnglishLens

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

consisting of two biconvex lenses A lens is a transmissive optical device that focuses or disperses a light beam by means of refraction. A simple lens consists of a single piece of transparent material, while a compound lens consists of several simple lenses (elements), usually arranged along a common axis. Lenses are made from materials such as glass or plastic and are ground, polished, or molded to the required shape. A lens can focus light to form an image, unlike a prism, which refracts light without focusing. Devices that similarly focus or disperse waves and radiation other than visible light are also called "lenses", such as microwave lenses, electron lenses, acoustic lenses, or explosive lenses. Lenses are used in various imaging devices such as telescopes, binoculars, and cameras. They are also used as visual aids in glasses to correct defects of vision such as myopia and hypermetropia.

consisting of two biconvex lenses A lens is a transmissive optical device that focuses or disperses a light beam by means of refraction. A simple lens consists of a single piece of transparent material, while a compound lens consists of several simple lenses (elements), usually arranged along a common axis. Lenses are made from materials such as glass or plastic and are ground, polished, or molded to the required shape. A lens can focus light to form an image, unlike a prism, which refracts light without focusing. Devices that similarly focus or disperse waves and radiation other than visible light are also called "lenses", such as microwave lenses, electron lenses, acoustic lenses, or explosive lenses. Lenses are used in various imaging devices such as telescopes, binoculars, and cameras. They are also used as visual aids in glasses to correct defects of vision such as myopia and hypermetropia.

Construction of simple lenses

Most lenses are spherical lenses: their two surfaces are parts of the surfaces of spheres. Each surface can be convex (bulging outwards from the lens), concave (depressed into the lens), or planar (flat). The line joining the centres of the spheres making up the lens surfaces is called the axis of the lens. Typically the lens axis passes through the physical centre of the lens, because of the way they are manufactured. Lenses may be cut or ground after manufacturing to give them a different shape or size. The lens axis may then not pass through the physical centre of the lens. Toric or sphero-cylindrical lenses have surfaces with two different radii of curvature in two orthogonal planes. They have a different focal power in different meridians. This forms an astigmatic lens. An example is eyeglass lenses that are used to correct astigmatism in someone's eye.

Types of simple lenses

Lenses are classified by the curvature of the two optical surfaces. A lens is biconvex (or double convex, or just convex) if both surfaces are convex. If both surfaces have the same radius of curvature, the lens is equiconvex. A lens with two concave surfaces is biconcave (or just concave). If one of the surfaces is flat, the lens is plano-convex or plano-concave depending on the curvature of the other surface. A lens with one convex and one concave side is convex-concave or meniscus. Convex-concave lenses are most commonly used in corrective lenses, since the shape minimizes some aberrations. For a biconvex or plano-convex lens in a lower-index medium, a collimated beam of light passing through the lens converges to a spot (a focus) behind the lens. In this case, the lens is called a positive or converging lens. For a thin lens in air, the distance from the lens to the spot is the focal length of the lens, which is commonly represented by in diagrams and equations. An extended hemispherical lens is a special type of plano-convex lens, in which the lens's curved surface is a full hemisphere and the lens is much thicker than the radius of curvature. Another extreme case of a thick convex lens is a ball lens, whose shape is completely round. When used in novelty photography it is often called a "lensball". A ball-shaped lens has the advantage of being omnidirectional, but for most optical glass types, its focal point lies close to the ball's surface. Because of the ball's curvature extremes compared to the lens size, optical aberration is much worse than thin lenses, with the notable exception of chromatic aberration. For a biconcave or plano-concave lens in a lower-index medium, a collimated beam of light passing through the lens is diverged (spread); the lens is thus called a negative or diverging lens. The beam, after passing through the lens, appears to emanate from a particular point on the axis in front of the lens. For a thin lens in air, the distance from this point to the lens is the focal length, though it is negative with respect to the focal length of a converging lens. The behavior reverses when a lens is placed in a medium with higher refractive index than the material of the lens. In this case a biconvex or plano-convex lens diverges light, and a biconcave or plano-concave one converges it. Convex-concave (meniscus) lenses can be either positive or negative, depending on the relative curvatures of the two surfaces. A negative meniscus lens has a steeper concave surface (with a shorter radius than the convex surface) and is thinner at the centre than at the periphery. Conversely, a positive meniscus lens has a steeper convex surface (with a shorter radius than the concave surface) and is thicker at the centre than at the periphery. An ideal thin lens with two surfaces of equal curvature (also equal in the sign) would have zero optical power (as its focal length becomes infinity as shown in the lensmaker's equation), meaning that it would neither converge nor diverge light. All real lenses have a nonzero thickness, however, which makes a real lens with identical curved surfaces slightly positive. To obtain exactly zero optical power, a meniscus lens must have slightly unequal curvatures to account for the effect of the lens' thickness. \frac {n_1}u + \frac {n_2}v = \frac {n_2-n_1}R where is the radius of the spherical surface, is the refractive index of the material of the surface, is the refractive index of medium (the medium other than the spherical surface material), u is the on-axis (on the optical axis) object distance from the line perpendicular to the axis toward the refraction point on the surface (which height is h), and v is the on-axis image distance from the line. Due to paraxial approximation where the line of h is close to the vertex of the spherical surface meeting the optical axis on the left, u and v are also considered distances with respect to the vertex. Moving v toward the right infinity leads to the first or object focal length f_0 for the spherical surface. Similarly, u toward the left infinity leads to the second or image focal length f_i . \begin{align} f_0 &= \frac{n_1}{n_2 - n_1} R,\\ f_i &= \frac{n_2}{n_2 - n_1} R \end{align} Applying this equation on the two spherical surfaces of a lens and approximating the lens thickness to zero (so a thin lens) leads to the lensmaker's formula. Applying Snell's law on the spherical surface, n_1 \sin i = n_2 \sin r\,. Also in the diagram, \begin{align} \tan (i - \theta) &= \frac hu \\ \tan (\theta - r) &= \frac hv \\ \sin \theta &= \frac hR \end{align} , and using small angle approximation (paraxial approximation) and eliminating , , and , \frac {n_2}v + \frac {n_1}u = \frac {n_2-n_1}R\,.

Lensmaker's equation

The (effective) focal length f of a spherical lens in air or vacuum for paraxial rays can be calculated from the lensmaker's equation: \frac{ 1 }{\ f\ } = \left( n - 1 \right) \left[\ \frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ } + \frac{\ \left( n - 1 \right)\ d ~}{\ n\ R_1\ R_2\ }\ \right]\ , where n is the refractive index of the lens material; R_1 is the (signed, see below) radius of curvature of the lens surface closer to the light source; R_2 is the radius of curvature of the lens surface farther from the light source; and d is the thickness of the lens (the distance along the lens axis between the two surface vertices). The focal length f is with respect to the principal planes of the lens, and the locations of the principal planes h_1 and h_2 with respect to the respective lens vertices are given by the following formulas, where it is a positive value if it is right to the respective vertex. \ h_1 = -\ \frac{\ \left( n - 1 \right) f\ d ~}{\ n\ R_2\ }\ \ h_2 = -\ \frac{\ \left( n - 1 \right) f\ d ~}{\ n\ R_1\ }\ The focal length f is positive for converging lenses, and negative for diverging lenses. The reciprocal of the focal length, \tfrac{1}{f}, is the optical power of the lens. If the focal length is in metres, this gives the optical power in dioptres (reciprocal metres). Lenses have the same focal length when light travels from the back to the front as when light goes from the front to the back. Other properties of the lens, such as the aberrations are not the same in both directions.

Sign convention for radii of curvature and

The signs of the lens' radii of curvature indicate whether the corresponding surfaces are convex or concave. The sign convention used to represent this varies, but in this article a positive indicates a surface's center of curvature is further along in the direction of the ray travel (right, in the accompanying diagrams), while negative means that rays reaching the surface have already passed the center of curvature. Consequently, for external lens surfaces as diagrammed above, and indicate convex surfaces (used to converge light in a positive lens), while and indicate concave surfaces. The reciprocal of the radius of curvature is called the curvature. A flat surface has zero curvature, and its radius of curvature is infinite. \ \frac{ 1 }{\ f\ } \approx \left( n - 1 \right) \left[\ \frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ }\ \right] ~. The spherical thin lens equation in paraxial approximation is derived here with respect to the right figure. The 1st spherical lens surface (which meets the optical axis at V_1 as its vertex) images an on-axis object point O to the virtual image I ', which can be described by the following equation, \ \frac{\ n_1\ }{\ u\ } + \frac{\ n_2\ }{\ v'\ } = \frac{\ n_2 - n_1\ }{\ R_1\ } ~. For the imaging by the second lens surface (I ' as the object for this imaging), by taking the above sign convention, u' = - v' + d and \ \frac{ n_2 }{\ -v' + d\ } + \frac{\ n_1\ }{\ v\ } = \frac{\ n_1 - n_2\ }{\ R_2\ } ~. Adding these two equations yields \ \frac{\ n_1\ }{ u } + \frac{\ n_1\ }{ v } = \left( n_2 - n_1 \right) \left( \frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ } \right) + \frac{\ n_2\ d\ }{\ \left(\ v' - d\ \right)\ v'\ } ~. For the thin lens approximation where d \rightarrow 0, the 2nd term of the RHS (Right Hand Side) is gone, so \ \frac{\ n_1\ }{ u } + \frac{\ n_1\ }{ v } = \left( n_2 - n_1 \right) \left( \frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ } \right) ~. The focal length f of the thin lens is found by limiting u \rightarrow - \infty, \ \frac{\ n_1\ }{\ f\ } = \left( n_2 - n_1 \right) \left( \frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ } \right) \rightarrow \frac{ 1 }{\ f\ } = \left( \frac{\ n_2\ }{\ n_1\ } - 1 \right) \left( \frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ } \right) ~. So, the Gaussian thin lens equation is \ \frac{ 1 }{\ u\ } + \frac{ 1 }{\ v\ } = \frac{ 1 }{\ f\ } ~. For the thin lens in air or vacuum where n_1 = 1 can be assumed, f becomes \ \frac{ 1 }{\ f\ } = \left( n - 1 \right)\left(\frac{ 1 }{\ R_1\ } - \frac{ 1 }{\ R_2\ } \right)\ where the subscript of 2 in n_2 is dropped. {1\over f} = {1\over S_1} + {1\over S_2}\,. The right figure shows how the image of an object point can be found by using three rays; the first ray parallelly incident on the lens and refracted toward the second focal point of it, the second ray crossing the optical center of the lens (so its direction does not change), and the third ray toward the first focal point and refracted to the direction parallel to the optical axis. This is a simple ray tracing method easily used. Two rays among the three are sufficient to locate the image point. By moving the object along the optical axis, it is shown that the second ray determines the image size while other rays help to locate the image location. The lens equation can also be put into the "Newtonian" form: f^2 = x_1 x_2\,, where x_1 = S_1-f and x_2 = S_2-f\,. x_1 is positive if it is left to the front focal point F_1 , and x_2 is positive if it is right to the rear focal point F_2 . Because f^2 is positive, an object point and the corresponding imaging point made by a lens are always in opposite sides with respect to their respective focal points. ( x_1 and x_2 are either positive or negative.) This Newtonian form of the lens equation can be derived by using a similarity between triangles P 1 P O1 F 1 and L 3 L 2 F 1 and another similarity between triangles L 1 L 2 F 2 and P 2 P 02 F 2 in the right figure. The similarities give the following equations and combining these results gives the Newtonian form of the lens equation. \begin{array}{lcr} \frac{y_1}{x_1} = \frac{\left\vert y_2 \right\vert}{f} \\ \frac{y_1}{f} = \frac{\left\vert y_2 \right\vert}{x_2} \end{array} of the thick lens cross the optical axis. If the object and image spaces are the same medium, then these points are also nodal points. The above equations also hold for thick lenses (including a compound lens made by multiple lenses, that can be treated as a thick lens) in air or vacuum (which refractive index can be treated as 1) if S_1 , S_2 , and f are with respect to the principal planes of the lens ( f is the effective focal length in this case). This is because of triangle similarities like the thin lens case above; similarity between triangles P 1 P O1 F 1 and L 3 H 1 F 1 and another similarity between triangles L 1 H 2 F 2 and P 2 P 02 F 2 in the right figure. If distances or pass through a medium other than air or vacuum, then a more complicated analysis is required. If an object is placed at a distance from a positive lens of focal length , we will find an image at a distance according to this formula. If a screen is placed at a distance on the opposite side of the lens, an image is formed on it. This sort of image, which can be projected onto a screen or image sensor, is known as a real image. This is the principle of the camera, and also of the human eye, in which the retina serves as the image sensor. The focusing adjustment of a camera adjusts , as using an image distance different from that required by this formula produces a defocused (fuzzy) image for an object at a distance of from the camera. Put another way, modifying causes objects at a different to come into perfect focus. In some cases, is negative, indicating that the image is formed on the opposite side of the lens from where those rays are being considered. Since the diverging light rays emanating from the lens never come into focus, and those rays are not physically present at the point where they to form an image, this is called a virtual image. Unlike real images, a virtual image cannot be projected on a screen, but appears to an observer looking through the lens as if it were a real object at the location of that virtual image. Likewise, it appears to a subsequent lens as if it were an object at that location, so that second lens could again focus that light into a real image, then being measured from the virtual image location behind the first lens to the second lens. This is exactly what the eye does when looking through a magnifying glass. The magnifying glass creates a (magnified) virtual image behind the magnifying glass, but those rays are then re-imaged by the lens of the eye to create a real image on the retina. Using a positive lens of focal length , a virtual image results when , the lens thus being used as a magnifying glass (rather than if as for a camera). Using a negative lens ( ) with a ( ) can only produce a virtual image ( ), according to the above formula. It is also possible for the object distance to be negative, in which case the lens sees a so-called virtual object. This happens when the lens is inserted into a converging beam (being focused by a previous lens) the location of its real image. In that case even a negative lens can project a real image, as is done by a Barlow lens. For a given lens with the focal length f, the minimum distance between an object and the real image is 4f (S 1 = S 2 = 2f). This is derived by letting L = S 1 + S 2 , expressing S 2 in terms of S 1 by the lens equation (or expressing S 1 in terms of S 2 ), and equating the derivative of L with respect to S 1 (or S 2 ) to zero. (Note that L has no limit in increasing so its extremum is only the minimum, at which the derivate of L is zero.) M = - \frac{S_2}{S_1} = \frac{f}{f - S_1}\ = - \frac{f}{x_1} where is the magnification factor defined as the ratio of the size of an image compared to the size of the object. The sign convention here dictates that if is negative, as it is for real images, the image is upside-down with respect to the object. For virtual images is positive, so the image is upright. This magnification formula provides two easy ways to distinguish converging ( ) and diverging ( ) lenses: For an object very close to the lens ( ), a converging lens would form a magnified (bigger) virtual image, whereas a diverging lens would form a demagnified (smaller) image; For an object very far from the lens ( ), a converging lens would form an inverted image, whereas a diverging lens would form an upright image. Linear magnification is not always the most useful measure of magnifying power. For instance, when characterizing a visual telescope or binoculars that produce only a virtual image, one would be more concerned with the angular magnification—which expresses how much larger a distant object appears through the telescope compared to the naked eye. In the case of a camera one would quote the plate scale, which compares the apparent (angular) size of a distant object to the size of the real image produced at the focus. The plate scale is the reciprocal of the focal length of the camera lens; lenses are categorized as long-focus lenses or wide-angle lenses according to their focal lengths. Using an inappropriate measurement of magnification can be formally correct but yield a meaningless number. For instance, using a magnifying glass of focal length, held from the eye and from the object, produces a virtual image at infinity of infinite linear size: . But the angular magnification is 5, meaning that the object appears 5 times larger to the eye than without the lens. When taking a picture of the moon using a camera with a lens, one is not concerned with the linear magnification Rather, the plate scale of the camera is about , from which one can conclude that the image on the film corresponds to an angular size of the moon seen from earth of about 0.5°. In the extreme case where an object is an infinite distance away, , and , indicating that the object would be imaged to a single point in the focal plane. In fact, the diameter of the projected spot is not actually zero, since diffraction places a lower limit on the size of the point spread function. This is called the diffraction limit.

Compound lenses

Simple lenses are subject to the optical aberrations discussed above. In many cases these aberrations can be compensated for to a great extent by using a combination of simple lenses with complementary aberrations. A compound lens is a collection of simple lenses of different shapes and made of materials of different refractive indices, arranged one after the other with a common axis. In a multiple-lens system, one can consider the image created by the first lens to be a virtual object for the next lens. That lens creates an image of this virtual object, and in this way the imaging cascades through the lenses until the final image is produced by the last lens in the system. As shown above, the Gaussian lens equation for a spherical lens is derived such that the 2nd surface of the lens images the image made by the 1st lens surface. Following the same logic, in multi-lens imaging, the 3rd lens surface (the front surface of the 2nd lens) images the image made by the 2nd surface, and the 4th surface (the back surface of the 2nd lens) images the image made by the 3rd surface. This imaging cascade by each lens surface justifies the imaging cascade by each lens. For a two-lens system the object distances of each lens can be denoted as s_{o1} and s_{o2} , and the image distances as and s_{i1} and s_{i2} . If the lenses are thin, each satisfies the thin lens formula \frac{1}{f_j} = \frac{1}{s_{oj}} + \frac{1}{s_{ij}}, If the distance between the two lenses is d , then s_{o2} = d - s_{i1} . (The 2nd lens images the image of the first lens.) FFD (Front Focal Distance) is defined as the distance between the front (left) focal point of an optical system and its nearest optical surface vertex. If an object is located at the front focal point of the system, then its image made by the system is located infinitely far way to the right (i.e., light rays from the object is collimated after the system). To do this, the image of the 1st lens is located at the focal point of the 2nd lens, i.e., s_{i1} = d - f_2 . So, the thin lens formula for the 1st lens becomes \frac{1}{f_1} = \frac{1}{FFD} + \frac{1}{d - f_2} \rightarrow FFD = \frac{f_1(d - f_2)}{d - (f_1 + f_2)}. BFD (Back Focal Distance) is similarly defined as the distance between the back (right) focal point of an optical system and its nearest optical surface vertex. If an object is located infinitely far away from the system (to the left), then its image made by the system is located at the back focal point. In this case, the 1st lens images the object at its focal point. So, the thin lens formula for the 2nd lens becomes \frac{1}{f_2} = \frac{1}{BFD} + \frac{1}{d - f_1} \rightarrow BFD = \frac{f_2(d - f_1)}{d - (f_1 + f_2)}. A simplest case is where thin lenses are placed in contact ( d = 0 ). Then FFD = BFD = f , so the combined focal length of the lenses is given by \frac{1}{f} = \frac{1}{f_1} + \frac{1}{f_2}\,. Since is the power of a lens with focal length , it can be seen that the powers of thin lenses in contact are additive. The general case of multiple thin lenses in contact is \frac{1}{f} =\sum_{k = 1}^N \frac{1}{f_k} where N is the number of lenses. If two thin lenses are separated in air by some distance , then the focal length for the combined system is given by \frac{1}{f} = \frac{1}{f_1} + \frac{1}{f_2}-\frac{d}{f_1 f_2}\,. As tends to zero, the focal length of the system tends to the value of given for thin lenses in contact. It can be shown that the same formula works for thick lenses if is taken as the distance between their principal planes. If the separation distance between two lenses is equal to the sum of their focal lengths ( ), then the FFD and BFD are infinite. This corresponds to a pair of lenses that transforms a parallel (collimated) beam into another collimated beam. This type of system is called an afocal system, since it produces no net convergence or divergence of the beam. Two lenses at this separation form the simplest type of optical telescope. Although the system does not alter the divergence of a collimated beam, it does alter the (transverse) width of the beam. The magnification of such a telescope is given by M = -\frac{f_2}{f_1}\,, which is the ratio of the output beam width to the input beam width. Note the sign convention: a telescope with two convex lenses ( , ) produces a negative magnification, indicating an inverted image. A convex plus a concave lens ( ) produces a positive magnification and the image is upright. For further information on simple optical telescopes, see Refracting telescope § Refracting telescope designs.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372120088 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.