Lesson plan
light pen
(HES) console in use at Brown University, circa October 1969. The photo shows HES on an IBM 2250 Mod 4 display station, including lightpen and programmed function keyboard, channel coupled to Brown's IBM 360 mainframe. A light pen is a computer input device in the form of a light-sensitive wand used in conjunction with a cathode-ray tube (CRT) display. Like a touchscreen, a light pen allows the user to point to displayed graphic elements such as menus or buttons, or even draw directly on the screen. However, while a touchscreen acts as a sensor to detect a fingertip or stylus, a light pen serves as the sensor itself, detecting the light emitted by the CRT's phosphors. Light pens are compatible with both vector-based and raster-based CRT displays. As a CRT's electron beam traverses the screen, it excites a phosphor coating within the CRT, causing it to glow. If this occurs directly under the tip of the pen, a photosensitive component such as a photodiode causes a timing signal to be sent to the computer. Using either the known position of the beam at that precise moment (in a vector-based system), or the time since the last horizontal or vertical synchronization pulses (in a raster-based system), the exact position of the pen can be derived.
Article summary
(HES) console in use at Brown University, circa October 1969. The photo shows HES on an IBM 2250 Mod 4 display station, including lightpen and programmed function keyboard, channel coupled to Brown's IBM 360 mainframe. A light pen is a computer input device in the form of a light-sensitive wand used in conjunction with a cathode-ray tube (CRT) display. Like a touchscreen, a light pen allows the user to point to displayed graphic elements such as menus or buttons, or even draw directly on the screen. However, while a touchscreen acts as a sensor to detect a fingertip or stylus, a light pen serves as the sensor itself, detecting the light emitted by the CRT's phosphors. Light pens are compatible with both vector-based and raster-based CRT displays. As a CRT's electron beam traverses the screen, it excites a phosphor coating within the CRT, causing it to glow. If this occurs directly under the tip of the pen, a photosensitive component such as a photodiode causes a timing signal to be sent to the computer. Using either the known position of the beam at that precise moment (in a vector-based system), or the time since the last horizontal or vertical synchronization pulses (in a raster-based system), the exact position of the pen can be derived.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.