{
  "id": "enwiki-001375869160",
  "slug": "lignin",
  "title": "Lignin",
  "qid": "",
  "lead": "Lignin is a class of complex organic polymers that form key structural materials in the support tissues of most plants. Lignins are particularly important in the formation of cell walls, especially in wood and bark, because they lend rigidity and do not rot easily. Chemically, lignins are polymers made by the cross-linking of phenolic precursors.",
  "body": "Lignin is a class of complex organic polymers that form key structural materials in the support tissues of most plants. Lignins are particularly important in the formation of cell walls, especially in wood and bark, because they lend rigidity and do not rot easily. Chemically, lignins are polymers made by the cross-linking of phenolic precursors. ==Composition and structure== The composition of lignin varies from species to species. An example of composition from an aspen sample is 63.4% carbon, 5.9% hydrogen, 0.7% ash (mineral components), and 30% oxygen (by difference), corresponding approximately to the formula (C 31 H 34 O 11 ) n . Lignin is a collection of highly heterogeneous polymers derived from a handful of precursor lignols. Heterogeneity arises from the diversity and degree of crosslinking between these lignols. The lignols that crosslink are of three main types, all derived from phenylpropene: coniferyl alcohol (3-methoxy-4-hydroxyphenylpropenol; its radical, G, is sometimes called guaiacyl), sinapyl alcohol (3,5-dimethoxy-4-hydroxyphenylpropenol; its radical, S, is sometimes called syringyl), and paracoumaryl alcohol (4-hydroxyphenylpropenol; its radical, H, is sometimes called 4-hydroxyphenyl). The relative amounts of the precursor \"monomers\" (lignols or monolignols) vary according to the plant source. Lignins are typically classified according to their syringyl/guaiacyl (S/G) ratio. Lignin from gymnosperms is derived from the coniferyl alcohol, which gives rise to G upon pyrolysis. In angiosperms some of the coniferyl alcohol is converted to S. Thus, lignin in angiosperms has both G and S components. Lignin's molecular masses exceed 10,000 u. It is hydrophobic as it is rich in aromatic subunits. The degree of polymerisation is difficult to measure, since the material is heterogeneous. Different types of lignin have been described depending on the means of isolation. Many grasses have mostly G, while some palms have mainly S. All lignins contain small amounts of incomplete or modified monolignols, and other monomers are prominent in non-woody plants. ==Delignification== , Germany) using the kraft or the sulfite process, lignin is removed from lignocellulose to yield pulp for papermaking. The pulp and paper industry is heavily focused on the removal of lignin from woody and some related plants. Roughly 30% of wood is lignin, the remainder being cellulose, the main component of paper, and a lesser amount of hemicellulose. Only a fraction of the lignin recovered in paper making is used. A wide range of low volume applications have been proposed, where the form but not the quality is important. Delignification is achieved by \"cooking\" wood chips in a solution of various chemicals. In the Kraft process, which is the dominant technology, an aqueous solution of sodium sulfide and sodium hydroxide is used. Lignin removed in this way is usually burned to power the paper mill. The sulfide, or more accurately the hydrosulfide (SH - ), depolymerizes the lignin. A characteristic of the Kraft process is the formation of dimethyl sulfide and related odoriferous organosulfur compounds. In Sulfite pulping, sulfite salts are used to delignify. This technology cogenerates lignosulfonates. Paper from the Kraft process retains some lignin and is consequently brownish. Less strong than the Kraft product is sulfite paper, which is white. Many applications have been proposed for the lignosulfonates. They are used as dispersants, humectants, emulsion stabilizers, and sequestrants (water treatment). Lignosulfonate has been investigated as a water reducers or superplasticizers for concrete. Given that it is the most prevalent biopolymer after cellulose, lignin has been investigated as a feedstock for biofuel production. Tecnaro website",
  "categories": [
    "10639794",
    "109487963",
    "20410370",
    "22906685",
    "23118434",
    "23603337",
    "24745122",
    "29731028",
    "49827500",
    "57377678"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1375869160",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1789912510.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001375869160",
    "type": "webpage",
    "title": "Lignin",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/lignin",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          21
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          21
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001375869160",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1375869160",
    "note": "Immutable snapshot enwiki-001375869160"
  }
}