Liquid air

Liquid Air was the marque of an automobile planned by Liquid Air Power and Automobile Co. of Boston and New York City in 1899.

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Liquid Air was the marque of an automobile planned by Liquid Air Power and Automobile Co. of Boston and New York City in 1899. A factory location was acquired in Boston, Massachusetts, in 1899, and Liquid Air claimed they would construct a car that would run a hundred miles on liquid air. In 1901, the company had gone into receivership with declared capital stock of $1,500,000 but assets of only $7,500.

Liquid air is air that has been cooled to very low temperatures (cryogenic temperatures), so that it has condensed into a pale blue mobile liquid. It is stored in specialized containers, such as vacuum flasks, to insulate it from room temperature. Liquid air can absorb heat rapidly and revert to its gaseous state.

It is often used for condensing other substances into liquid and/or solidifying them, and as an industrial source of nitrogen, oxygen, argon, and other inert gases through a process called air separation (industrially referred to as air rectification).

Process of production

The most common process for the preparation of liquid air is the two-column Hampson–Linde cycle using the Joule–Thomson effect. Air is fed at high pressure (> ) into the lower column, in which it is separated into pure nitrogen and oxygen-rich liquid.

The rich liquid and some of the nitrogen are fed as reflux into the upper column, which operates at low pressure (< ), where the final separation into pure nitrogen and oxygen occurs. A raw argon product can be removed from the middle of the upper column for further purification.

Air can also be liquefied by Claude's process, which combines cooling by Joule–Thomson effect, isentropic expansion and regenerative cooling.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1366096990 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001365075887 · captured 2026-07-26 · ledger · version history

Cite this page as: encyclopegia.org, “Liquid air”, snapshot enwiki-001365075887. https://encyclopegia.org/a/liquid-air

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.