Lesson plan

Load modulation

Load Modulation is a method of sharing information from one device to another by means of modulating the load that the transmitting device imposes on a signal provided by the receiving device. This is used, for example, to allow ISO/IEC 14443 and ISO/IEC 15693 NFC cards to reply to the reading device without the need for the NFC card to contain a power source. Instead, it is powered by the magnetic field provided by the reader, conveying its data back to the reader by switching a resistor or capacitor in and out of its antenna circuit, thus modulating the load that the card imposes upon the reader's field.

Back to article

Article summary

Load Modulation is a method of sharing information from one device to another by means of modulating the load that the transmitting device imposes on a signal provided by the receiving device. This is used, for example, to allow ISO/IEC 14443 and ISO/IEC 15693 NFC cards to reply to the reading device without the need for the NFC card to contain a power source. Instead, it is powered by the magnetic field provided by the reader, conveying its data back to the reader by switching a resistor or capacitor in and out of its antenna circuit, thus modulating the load that the card imposes upon the reader's field.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.