Lesson plan
Load–store architecture
In computer engineering, a load–store architecture (or a register–register architecture) is an instruction set architecture that divides instructions into two categories: memory access (load and store between memory and registers) and ALU operations (which only occur between registers). Some RISC architectures such as PowerPC, SPARC, RISC-V, ARM, and MIPS are load–store architectures. For instance, in a load–store approach, both the operands and the destination for an ADD operation must be in registers. This differs from a register–memory architecture (for example, a CISC instruction set architecture such as x86) in which one of the operands for the ADD operation may be in memory while the other is in a register. The earliest example of a load–store architecture was the CDC 6600. Almost all vector processors (including many GPUs ) use the load–store approach.
Article summary
In computer engineering, a load–store architecture (or a register–register architecture) is an instruction set architecture that divides instructions into two categories: memory access (load and store between memory and registers) and ALU operations (which only occur between registers). Some RISC architectures such as PowerPC, SPARC, RISC-V, ARM, and MIPS are load–store architectures. For instance, in a load–store approach, both the operands and the destination for an ADD operation must be in registers. This differs from a register–memory architecture (for example, a CISC instruction set architecture such as x86) in which one of the operands for the ADD operation may be in memory while the other is in a register. The earliest example of a load–store architecture was the CDC 6600. Almost all vector processors (including many GPUs ) use the load–store approach.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.