Lesson plan
Load task register
The LTR x86 instruction stands for load task register and is used in operating systems that support multitasking. LTR is supported only in protected mode and long mode, not in real mode or virtual 8086 mode. It must be executed when the Current Privilege Level (CPL) is 0, and therefore cannot be used by application programs. LTR loads the special x86 task register with a segment selector that points to a task state segment (TSS). After executing the LTR instruction, the TSS pointed to by the argument is marked busy, but no hardware task switch occurs. The opposite of the LTR instruction is the STR instruction, which means store task register and copies the value of the task register to the specified location. Note that the x86 task register is only accessible directly through the LTR and STR instructions.
Article summary
The LTR x86 instruction stands for load task register and is used in operating systems that support multitasking. LTR is supported only in protected mode and long mode, not in real mode or virtual 8086 mode. It must be executed when the Current Privilege Level (CPL) is 0, and therefore cannot be used by application programs. LTR loads the special x86 task register with a segment selector that points to a task state segment (TSS). After executing the LTR instruction, the TSS pointed to by the argument is marked busy, but no hardware task switch occurs. The opposite of the LTR instruction is the STR instruction, which means store task register and copies the value of the task register to the specified location. Note that the x86 task register is only accessible directly through the LTR and STR instructions.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.