Loam molding

Loam molding was formerly used for making cast iron or bronze cannon and is still used for casting large bells.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Loam molding was formerly used for making cast iron or bronze cannon and is still used for casting large bells. Loam (pronounced 'low-m') is a mixture of sand and clay with water, sometimes with horse dung (valuable for its straw content), animal hair or coke. The object of including dung or hair was to make the mould permeable and allow gas (such as steam) to escape during casting.

The mold for a cylindrically symmetrical object, such as a cannon, is built up in stages around a spindle, to which is fixed a strickle board with the shape of the eventual casting. The mold also has provision for the casting of a gunhead, beyond the muzzle of the cannon, into which slag can float during casting.

If the object is to be hollow, a straw rope is wound around the spindle and covered in a friable material to the dimensions of the exterior of the cannon, the strickle board being turned on the spindle to ensure it is cylindrical. Decorative elements and models of the trunnions are then attached. This is then covered in a thick layer of loam.

The mold is then fired. After this the straw rope is then pulled out with the rest of the material used to form the shape of the cannon. The mould is then mounted vertically in a casting put in front of the furnace.

If the cannon is to be cast hollow, a core is mounted in the mould. The furnace was then tapped and metal run into the mold. The mold is then broken off the casting.

The gunhead is cut off, and the bore of the cannon reamed out using a boring mill. The process for the cylinder for a steam engine would be similar. The process for casting a bell is of the same nature, but the procedure is necessarily different.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1360400940 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001360400940 · captured 2026-06-21 · ledger · version history

Cite this page as: encyclopegia.org, “Loam molding”, snapshot enwiki-001360400940. https://encyclopegia.org/a/loam-molding

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.