Locking differential

Article summary

air-locking differential fitted to a Mitsubishi Delica L400 LWB Diff A locking differential is a mechanical component, commonly used in off-road vehicles, that is designed to overcome the limitations of normal differentials by selectively locking the rotation of the wheels on an axle relative to one another, as if on a common shaft. In contrast to open differentials or limited-slip differentials found in many roadgoing cars, a locked differential forces both wheels to turn at the same speed, regardless of the traction (or lack thereof) available to each wheel individually. When a differential is unlocked, each wheel is allowed to rotate at different speeds, which is desirable for negotiating turns, as the outside wheel travels a longer distance than the inside wheel. An open differential always provides the same torque to each wheel. Therefore, although the wheels may rotate at different speeds, they apply the same rotational force, even if one is entirely stationary, and the other rotating. In contrast, a locked differential forces both wheels on a given axle to rotate at the same speed, regardless of the tractional conditions under either wheel. As such, each wheel can apply as much rotational force as the traction under it will allow, and the torques on each side-shaft will be unequal.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.