Lode coordinates

Lode coordinates (z,r,\theta) or Haigh–Westergaard coordinates (\xi,\rho,\theta) . are a set of tensor invariants that span the space of real, symmetric, second-order, 3-dimensional tensors and are isomorphic with respect to principal…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 16 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Lode coordinates ( z , r , θ ) {\displaystyle (z,r,\theta )} or Haigh–Westergaard coordinates ( ξ , ρ , θ ) {\displaystyle (\xi ,\rho ,\theta )} .[1] are a set of tensor invariants that span the space of real, symmetric, second-order, 3-dimensional tensors and are isomorphic with respect to principal stress space. This right-handed orthogonal coordinate system is named in honor of the German scientist Dr. Walter Lode because of his seminal paper written in 1926 describing the effect of the middle principal stress on metal plasticity.[2] Other examples of sets of tensor invariants are the set of principal stresses ( σ 1 , σ 2 , σ 3 ) {\displaystyle (\sigma _{1},\sigma _{2},\sigma _{3})} or the set of kinematic invariants ( I 1 , J 2 , J 3 ) {\displaystyle (I_{1},J_{2},J_{3})} . The Lode coordinate system can be described as a cylindrical coordinate system within principal stress space with a coincident origin and the z-axis parallel to the vector ( σ 1 , σ 2 , σ 3 ) = ( 1 , 1 , 1 ) {\displaystyle (\sigma _{1},\sigma _{2},\sigma _{3})=(1,1,1)} .

Mechanics invariants

edit edit source

The Lode coordinates are most easily computed using the mechanics invariants. These invariants are a mixture of the invariants of the Cauchy stress tensor, σ {\displaystyle {\boldsymbol {\sigma }}} , and the stress deviator, s {\displaystyle {\boldsymbol {s}}} , and are given by[3]

I 1 = t r ( σ ) {\displaystyle I_{1}=\mathrm {tr} ({\boldsymbol {\sigma }})}
J 2 = 1 2 [ tr ( σ 2 ) − 1 3 tr ( σ ) 2 ] = 1 2 t r ( s ⋅ s ) = 1 2 ‖ s ‖ 2 {\displaystyle J_{2}={\frac {1}{2}}\left[{\text{tr}}({\boldsymbol {\sigma }}^{2})-{\frac {1}{3}}{\text{tr}}({\boldsymbol {\sigma }})^{2}\right]={\frac {1}{2}}\mathrm {tr} \left({\boldsymbol {s}}\cdot {\boldsymbol {s}}\right)={\frac {1}{2}}\lVert {\boldsymbol {s}}\rVert ^{2}}
J 3 = d e t ( s ) = 1 3 t r ( s ⋅ s ⋅ s ) {\displaystyle J_{3}=\mathrm {det} ({\boldsymbol {s}})={\frac {1}{3}}\mathrm {tr} \left({\boldsymbol {s}}\cdot {\boldsymbol {s}}\cdot {\boldsymbol {s}}\right)}

which can be written equivalently in Einstein notation

I 1 = σ k k {\displaystyle I_{1}=\sigma _{kk}}
J 2 = 1 2 [ tr ( σ 2 ) − 1 3 tr ( σ ) 2 ] = 1 2 s i j s j i = 1 2 s i j s i j {\displaystyle J_{2}={\frac {1}{2}}\left[{\text{tr}}({\boldsymbol {\sigma }}^{2})-{\frac {1}{3}}{\text{tr}}({\boldsymbol {\sigma }})^{2}\right]={\frac {1}{2}}s_{ij}s_{ji}={\frac {1}{2}}s_{ij}s_{ij}}
J 3 = 1 6 ϵ i j k ϵ p q r σ i p σ j q σ k r = 1 3 s i j s j k s k i {\displaystyle J_{3}={\frac {1}{6}}\epsilon _{ijk}\epsilon _{pqr}\sigma _{ip}\sigma _{jq}\sigma _{kr}={\frac {1}{3}}s_{ij}s_{jk}s_{ki}}

where ϵ {\displaystyle \epsilon } is the Levi-Civita symbol (or permutation symbol) and the last two forms for J 2 {\displaystyle J_{2}} are equivalent because s {\displaystyle {\boldsymbol {s}}} is symmetric ( s i j = s j i {\displaystyle s_{ij}=s_{ji}} ).

The gradients of these invariants[4] can be calculated by

∂ I 1 ∂ σ = I {\displaystyle {\frac {\partial I_{1}}{\partial {\boldsymbol {\sigma }}}}={\boldsymbol {I}}}
∂ J 2 ∂ σ = s = σ − t r ( σ ) 3 I {\displaystyle {\frac {\partial J_{2}}{\partial {\boldsymbol {\sigma }}}}={\boldsymbol {s}}={\boldsymbol {\sigma }}-{\frac {\mathrm {tr} \left({\boldsymbol {\sigma }}\right)}{3}}{\boldsymbol {I}}}
∂ J 3 ∂ σ = T = s ⋅ s − 2 J 2 3 I {\displaystyle {\frac {\partial J_{3}}{\partial {\boldsymbol {\sigma }}}}={\boldsymbol {T}}={\boldsymbol {s}}\cdot {\boldsymbol {s}}-{\frac {2J_{2}}{3}}{\boldsymbol {I}}}

where I {\displaystyle {\boldsymbol {I}}} is the second-order identity tensor and T {\displaystyle {\boldsymbol {T}}} is called the Hill tensor.

Axial coordinate ( z ) {\displaystyle (z)}

edit edit source

The z {\displaystyle z} -coordinate is found by calculating the magnitude of the orthogonal projection of the stress state onto the hydrostatic axis.

z = E z : σ = t r ( σ ) 3 = I 1 3 {\displaystyle z={\boldsymbol {E_{z}}}\colon {\boldsymbol {\sigma }}={\frac {\mathrm {tr} ({\boldsymbol {\sigma }})}{\sqrt {3}}}={\frac {I_{1}}{\sqrt {3}}}}

where

E z = I ‖ I ‖ = I 3 {\displaystyle {\boldsymbol {E_{z}}}={\frac {\boldsymbol {I}}{\lVert {\boldsymbol {I}}\rVert }}={\frac {\boldsymbol {I}}{\sqrt {3}}}}

is the unit normal in the direction of the hydrostatic axis.

Radial coordinate ( r ) {\displaystyle (r)}

edit edit source

The r {\displaystyle r} -coordinate is found by calculating the magnitude of the stress deviator (the orthogonal projection of the stress state into the deviatoric plane).

r = E r : σ = ‖ s ‖ = 2 J 2 {\displaystyle r={\boldsymbol {E_{r}}}\colon {\boldsymbol {\sigma }}=\lVert {\boldsymbol {s}}\rVert ={\sqrt {2J_{2}}}}

where

E r = s ‖ s ‖ {\displaystyle {\boldsymbol {E_{r}}}={\frac {\boldsymbol {s}}{\lVert {\boldsymbol {s}}\rVert }}}
Derivation
The relation that r = 2 J 2 {\displaystyle r={\sqrt {2J_{2}}}} can be found by expanding the relation
r = s ‖ s ‖ : σ {\displaystyle r={\frac {\boldsymbol {s}}{\lVert {\boldsymbol {s}}\rVert }}\colon {\boldsymbol {\sigma }}}

and writing σ {\displaystyle \sigma } in terms of the isotropic and deviatoric parts while expanding the magnitude of s {\displaystyle {\boldsymbol {s}}}

r = s s : s : ( s + z E z ) = 1 s : s ( s : s + z s : E z ) {\displaystyle r={\frac {\boldsymbol {s}}{\sqrt {{\boldsymbol {s}}\colon {\boldsymbol {s}}}}}\colon \left({\boldsymbol {s}}+z{\boldsymbol {E_{z}}}\right)={\frac {1}{\sqrt {{\boldsymbol {s}}\colon {\boldsymbol {s}}}}}\left({\boldsymbol {s}}\colon {\boldsymbol {s}}+z{\boldsymbol {s}}\colon {\boldsymbol {E_{z}}}\right)} .

Because E z {\displaystyle {\boldsymbol {E_{z}}}} is isotropic and s {\displaystyle {\boldsymbol {s}}} is deviatoric, their product is zero. Which leaves us with

r = s : s s : s = s : s {\displaystyle r={\frac {{\boldsymbol {s}}\colon {\boldsymbol {s}}}{\sqrt {{\boldsymbol {s}}\colon {\boldsymbol {s}}}}}={\sqrt {{\boldsymbol {s}}\colon {\boldsymbol {s}}}}}

Applying the identity A : B = t r ( A T ⋅ B ) {\displaystyle {\boldsymbol {A}}\colon {\boldsymbol {B}}=\mathrm {tr} \left({\boldsymbol {A}}^{T}\cdot {\boldsymbol {B}}\right)} and using the definition of J 2 = 1 2 t r ( s ⋅ s ) {\displaystyle J_{2}={\frac {1}{2}}\mathrm {tr} \left({\boldsymbol {s}}\cdot {\boldsymbol {s}}\right)}

r = t r ( s ⋅ s ) = 2 J 2 {\displaystyle r={\sqrt {\mathrm {tr} \left({\boldsymbol {s}}\cdot {\boldsymbol {s}}\right)}}={\sqrt {2J_{2}}}}

is a unit tensor in the direction of the radial component.

Lode angle – angular coordinate ( θ ) {\displaystyle (\theta )}

edit edit source

The Lode angle can be considered, rather loosely, a measure of loading type. The Lode angle varies with respect to the middle eigenvalue of the stress. There are many definitions of Lode angle that each utilize different trigonometric functions: the positive sine[5] (It is incorrect (false) information that Chakrabarty defines shear stress mode angle with sin(Teta). Chakrabarty adopted Lode parameter with opposite sign than it has in the original Lode paper from 1926, see Page 59, formula (3) in the book «Chakrabarty, Jagabanduhu; 2006, Theory of Plasticity: Third edition, Elsevier, Amsterdam.». Effectively Chakrabarty shear stress mode angle is defined with -sin(Teta) just like it did for the first time Novozhilov in his work from 1951, Novozhilov 183-194, «О СВЯЗИ МЕЖДУ НАПРЯЖЕНИЯМИ И ДЕФОРМАЦИЯМИ В НЕЛИНЕЙНО УПРУГОЙ СРЕДЕ» (On relations between stresses and strains in non-linear elastic media) from 1951. The first work in which arguments and discussion is delivered why it is wise and useful to define shear stress mode angle with sin(Teta) is the Ziolkowski’s work «Parametrization of Cauchy Stress Tensor Treated as Autonomous Object Using Isotropy Angle and Skewness Angle» from 2022, https://et.ippt.pan.pl/index.php/et/article/view/2210. Accepting definition with sin(3Teta) in fact means that pure shears are accepted as comparison reference states, what has serious consequences.), negative sine,[6] and positive cosine[7] (here denoted θ s {\displaystyle \theta _{s}} , θ ¯ s {\displaystyle {\bar {\theta }}_{s}} , and θ c {\displaystyle \theta _{c}} , respectively)

sin ⁡ ( 3 θ s ) = − sin ⁡ ( 3 θ ¯ s ) = cos ⁡ ( 3 θ c ) = J 3 2 ( 3 J 2 ) 3 / 2 {\displaystyle \sin(3\theta _{s})=-\sin(3{\bar {\theta }}_{s})=\cos(3\theta _{c})={\frac {J_{3}}{2}}\left({\frac {3}{J_{2}}}\right)^{3/2}}

and are related by

θ s = π 6 − θ c θ s = − θ ¯ s {\displaystyle \theta _{s}={\frac {\pi }{6}}-\theta _{c}\qquad \qquad \theta _{s}=-{\bar {\theta }}_{s}}
Derivation
The relation between θ c {\displaystyle \theta _{c}} and θ s {\displaystyle \theta _{s}} can be shown by applying a trigonometric identity relating sine and cosine by a shift
cos ⁡ ( 3 θ c ) = sin ⁡ ( 3 θ s ) {\displaystyle \cos(3\theta _{c})=\sin(3\theta _{s})}
cos ⁡ ( 3 θ c ) = sin ⁡ ( ( 3 θ s − π 2 ) + π 2 ) {\displaystyle \cos(3\theta _{c})=\sin \left(\left(3\theta _{s}-{\frac {\pi }{2}}\right)+{\frac {\pi }{2}}\right)}
cos ⁡ ( 3 θ c ) = cos ⁡ ( 3 θ s − π 2 ) {\displaystyle \cos(3\theta _{c})=\cos \left(3\theta _{s}-{\frac {\pi }{2}}\right)} .

Because cosine is an even function and the range of the inverse cosine is usually 0 ≤ cos − 1 ⁡ ( θ ) ≤ 1 {\displaystyle 0\leq \cos ^{-1}(\theta )\leq 1} we take the negative possible value for the θ s {\displaystyle \theta _{s}} term, thus ensuring that θ c {\displaystyle \theta _{c}} is positive.

3 θ c = ± ( 3 θ s − π 2 ) {\displaystyle 3\theta _{c}=\pm \left(3\theta _{s}-{\frac {\pi }{2}}\right)}
θ c = π 6 − θ s {\displaystyle \theta _{c}={\frac {\pi }{6}}-\theta _{s}}

These definitions are all defined for a range of π / 3 {\displaystyle \pi /3} .

Stress State σ 1 ≥ σ 2 ≥ σ 3 {\displaystyle \sigma _{1}\geq \sigma _{2}\geq \sigma _{3}} θ s {\displaystyle \theta _{s}} θ ¯ s {\displaystyle {\bar {\theta }}_{s}} θ c {\displaystyle \theta _{c}}
range − π 6 ≤ θ s ≤ π 6 {\displaystyle -{\frac {\pi }{6}}\leq \theta _{s}\leq {\frac {\pi }{6}}} − π 6 ≤ θ s ≤ π 6 {\displaystyle -{\frac {\pi }{6}}\leq \theta _{s}\leq {\frac {\pi }{6}}} 0 ≤ θ c ≤ π 3 {\displaystyle 0\leq \theta _{c}\leq {\frac {\pi }{3}}}
Triaxial Compression (TXC) σ 1 ≥ σ 2 = σ 3 {\displaystyle \sigma _{1}\geq \sigma _{2}=\sigma _{3}} − π 6 {\displaystyle -{\frac {\pi }{6}}} π 6 {\displaystyle {\frac {\pi }{6}}} π 3 {\displaystyle {\frac {\pi }{3}}}
Shear (SHR) σ 2 = ( σ 1 + σ 3 ) / 2 {\displaystyle \sigma _{2}=(\sigma _{1}+\sigma _{3})/2} 0 {\displaystyle 0} 0 {\displaystyle 0} π 6 {\displaystyle {\frac {\pi }{6}}}
Triaxial Extension (TXE) σ 1 = σ 2 ≥ σ 3 {\displaystyle \sigma _{1}=\sigma _{2}\geq \sigma _{3}} π 6 {\displaystyle {\frac {\pi }{6}}} − π 6 {\displaystyle -{\frac {\pi }{6}}} 0 {\displaystyle 0}

The unit normal in the angular direction which completes the orthonormal basis can be calculated for θ s {\displaystyle \theta _{s}} [8] and θ c {\displaystyle \theta _{c}} [9] using

E θ s = T / ‖ T ‖ − sin ⁡ ( 3 θ s ) E r cos ⁡ ( 3 θ s ) E θ c = T / ‖ T ‖ − cos ⁡ ( 3 θ c ) E r sin ⁡ ( 3 θ c ) {\displaystyle {\boldsymbol {E_{\theta s}}}={\frac {{\boldsymbol {T}}/\lVert {\boldsymbol {T}}\rVert -\sin(3\theta _{s}){\boldsymbol {E_{r}}}}{\cos(3\theta _{s})}}\qquad {\boldsymbol {E_{\theta c}}}={\frac {{\boldsymbol {T}}/\lVert {\boldsymbol {T}}\rVert -\cos(3\theta _{c}){\boldsymbol {E_{r}}}}{\sin(3\theta _{c})}}} .

Meridional profile

edit edit source

The meridional profile is a 2D plot of ( z , r ) {\displaystyle (z,r)} holding θ {\displaystyle \theta } constant and is sometimes plotted using scalar multiples of ( z , r ) {\displaystyle (z,r)} . It is commonly used to demonstrate the pressure dependence of a yield surface or the pressure-shear trajectory of a stress path. Because r {\displaystyle r} is non-negative the plot usually omits the negative portion of the r {\displaystyle r} -axis, but can be included to illustrate effects at opposing Lode angles (usually triaxial extension and triaxial compression).

One of the benefits of plotting the meridional profile with ( z , r ) {\displaystyle (z,r)} is that it is a geometrically accurate depiction of the yield surface.[8] If a non-isomorphic pair is used for the meridional profile then the normal to the yield surface will not appear normal in the meridional profile. Any pair of coordinates that differ from ( z , r ) {\displaystyle (z,r)} by constant multiples of equal absolute value are also isomorphic with respect to principal stress space. As an example, pressure p = − I 1 / 3 {\displaystyle p=-I1/3} and the Von Mises stress σ v = 3 J 2 {\displaystyle \sigma _{v}={\sqrt {3J_{2}}}} are not an isomorphic coordinate pair and, therefore, distort the yield surface because

p = − 1 3 z {\displaystyle p=-{\frac {1}{\sqrt {3}}}z}
σ v = 3 2 r {\displaystyle \sigma _{v}={\sqrt {\frac {3}{2}}}r}

and, finally, | − 1 / 3 | ≠ | 3 / 2 | {\displaystyle |-1/{\sqrt {3}}|\neq |{\sqrt {3/2}}|} .

Octahedral profile

edit edit source

The octahedral profile is a 2D plot of ( r , θ ) {\displaystyle (r,\theta )} holding z {\displaystyle z} constant. Plotting the yield surface in the octahedral plane demonstrates the level of Lode angle dependence. The octahedral plane is sometimes referred to as the 'pi plane'[10] or 'deviatoric plane'.[11]

The octahedral profile is not necessarily constant for different values of pressure with the notable exceptions of the von Mises yield criterion and the Tresca yield criterion which are constant for all values of pressure.

A note on terminology

edit edit source

The term Haigh-Westergaard space is ambiguously used in the literature to mean both the Cartesian principal stress space[12][13] and the cylindrical Lode coordinate space[14][15]

See also

edit edit source

References

edit edit source
  1. ^ Menetrey, Philippe; Willam, K. J.; 1995, "Triaxial Failure Criterion for Concrete and its Generalization", Structural Journal, American Concrete Institute, Volume 92, Issue 3, pages 311-318, DOI: 10.14359/1132 Wikipedia revision 1352171162, retrieved 2026-11-18
  2. ^ Lode, Walter (1926), „Versuche über den Einfluß der mittleren Hauptspannung auf das Fließen der Metalle Eisen, Kupfer und Nickel“ ["Experiments on the influence of the mean principal stress on the flow of the metals iron, copper and nickel"], Zeitschrift für Physik, vol. 36 (November), pp. 913–939, DOI: 10.1007/BF01400222 Wikipedia revision 1352171162, retrieved 2026-11-18
  3. ^ Asaro, Robert J.; Lubarda, Vlado A.; 2006, Mechanics of Solids and Materials, Cambridge University Press Wikipedia revision 1352171162, retrieved 2026-11-18
  4. ^ Brannon, Rebecca M.; 2009, KAYENTA: Theory and User's Guide, Sandia National Laboratories, Albuquerque, New Mexico. Wikipedia revision 1352171162, retrieved 2026-11-18
  5. ^ Chakrabarty, Jagabanduhu; 2006, Theory of Plasticity: Third edition, Elsevier, Amsterdam. Wikipedia revision 1352171162, retrieved 2026-11-18
  6. ^ de Souza Neto, Eduardo A.; Peric, Djordje; Owen, David R. J.; 2008, Computational Methods for Plasticity: Theory and Applications, Wiley Wikipedia revision 1352171162, retrieved 2026-11-18
  7. ^ Han, D. J.; Chen, Wai-Fah; 1985, "A Nonuniform Hardening Plasticity Model for Concrete Materials", Mechanics of Materials, Volume 4, Issues 3–4, December 1985, Pages 283-302, doi: 10.1016/0167-6636(85)90025-0 Wikipedia revision 1352171162, retrieved 2026-11-18
  8. ^ a b Brannon, Rebecca M.; 2007, Elements of Phenomenological Plasticity: Geometrical Insight, Computational Algorithms, and Topics in Shock Physics, Shock Wave Science and Technology Reference Library: Solids I, Springer-New York Wikipedia revision 1352171162, retrieved 2026-11-18
  9. ^ Bigoni, Davide; Piccolroaz, Andrea; 2004, "Yield criteria for quasibrittle and frictional materials", International Journal of Solids and Structures, Volume 41, Issues 11–12, June 2004, Pages 2855-2878, doi: 10.1016/j.ijsolstr.2003.12.024 Wikipedia revision 1352171162, retrieved 2026-11-18
  10. ^ Lubliner, Jacob; 1990, Plasticity Theory, Pearson Education Wikipedia revision 1352171162, retrieved 2026-11-18
  11. ^ Chaboche, J.-L.; 2008, "A review of some plasticity and viscoplasticity theories", International Journal of Plasticity, 24(10):1642-1693, DOI:10.1016/j.ijplas.2008.03.009 Wikipedia revision 1352171162, retrieved 2026-11-18
  12. ^ Mouazen, Abdul Mounem; Neményi, Miklós; 1998, "A review of the finite element modelling techniques of soil tillage", Mathematics and Computers in Simulation, Volume 48, Issue 1, 1 November 1998, Pages 23-32, doi: 10.1016/S0378-4754(98)00152-9 Wikipedia revision 1352171162, retrieved 2026-11-18
  13. ^ Keryvin, Vincent; 2008, "Indentation as a probe for pressure sensitivity of metallic glasses", Journal of Physics: Condensed Matter, Volume 20, Number 11, DOI: 10.1088/0953-8984/20/11/114119 Wikipedia revision 1352171162, retrieved 2026-11-18
  14. ^ Červenka, Jan; Papanikolaou, Vassilis K.; 2008, "Three dimensional combined fracture–plastic material model for concrete", International Journal of Plasticity, Volume 24, Issue 12, December 2008, Pages 2192-2220, doi: 10.1016/j.ijplas.2008.01.004 Wikipedia revision 1352171162, retrieved 2026-11-18
  15. ^ Piccolroaz, Andrea; Bigoni, Davide; 2009, "Yield criteria for quasibrittle and frictional materials: A generalization to surfaces with corners", International Journal of Solids and Structures, Volume 46, Issue 20, 1 October 2009, Pages 3587-3596, doi: 10.1016/j.ijsolstr.2009.06.006 Wikipedia revision 1352171162, retrieved 2026-11-18

Text derived from https://en.wikipedia.org/w/index.php?oldid=1352171162 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001352171162 · captured 2026-05-02 · not yet sealed in the ledger · verify the chain · version history

Cite this page as: encyclopegia.org, “Lode coordinates”, snapshot enwiki-001352171162. https://encyclopegia.org/a/lode-coordinates