Log reduction

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Log reduction is a measure of how thoroughly a decontamination process reduces the concentration of a contaminant. It is defined as the common logarithm of the ratio of the levels of contamination before and after the process, so an increment of 1 corresponds to a reduction in concentration by a factor of 10. In general, an -log reduction means that the concentration of remaining contaminants is only times that of the original. So for example, a 0-log reduction is no reduction at all, while a 1-log reduction corresponds to a reduction of 90 percent from the original concentration, and a 2-log reduction corresponds to a reduction of 99 percent from the original concentration.

Log reduction is a measure of how thoroughly a decontamination process reduces the concentration of a contaminant. It is defined as the common logarithm of the ratio of the levels of contamination before and after the process, so an increment of 1 corresponds to a reduction in concentration by a factor of 10. In general, an -log reduction means that the concentration of remaining contaminants is only times that of the original. So for example, a 0-log reduction is no reduction at all, while a 1-log reduction corresponds to a reduction of 90 percent from the original concentration, and a 2-log reduction corresponds to a reduction of 99 percent from the original concentration.

Mathematical definition

Let and be the numerical values of the concentrations of a given contaminant, respectively before and after treatment, following a defined process. It is irrelevant in what units these concentrations are given, provided that both use the same units. Then an -log reduction is achieved, where R=\log_{10}{c_\mathrm{b}}-\log_{10}{c_\mathrm{a}}=-\log_{10}{\left(\frac{c_\mathrm{a}}{c_\mathrm{b}}\right)} . For the purpose of presentation, the value of is rounded down to a desired precision, usually to a whole number. Example: Let the concentration of some contaminant be 580 ppm before and 0.725 ppm after treatment. Then R=-\log_{10}{\left(\frac{0.725}{580}\right)}=-\log_{10}{0.00125}\approx 2.903 Rounded down, is 2, so a 2-log reduction is achieved. Conversely, an -log reduction means that a reduction by a factor of has been achieved.

Log reduction and percentage reduction

Reduction is often expressed as a percentage. The closer it is to 100%, the better. Letting and be as before, a reduction by  % is achieved, where P = 100~\times~\frac{c_\mathrm{b} - c_\mathrm{a}}{c_\mathrm{b}}. Example: Let, as in the earlier example, the concentration of some contaminant be 580 ppm before and 0.725 ppm after treatment. Then P~=~100~\times~\frac{580 - 0.725}{580}~=~100~\times~0.99875~=~99.875. So this is (better than) a 99% reduction, but not yet quite a 99.9% reduction. The following table summarizes the most common cases. In general, if is a whole number, an -log reduction corresponds to a percentage reduction with leading digits "9" in the percentage (provided that it is at least 10%).

See also

Decimal reduction time

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1298634584 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.