LogoFAIL

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

LogoFAIL is a security vulnerability and exploit thereof that affects computer motherboard firmware with TianoCore EDK II, including Insyde Software's InsydeH2O modules and similar code in AMI and Phoenix firmware, which are commonly found on both Intel and AMD motherboards, and which enable loading of custom boot logos. The exploit was discovered in December 2023 by researchers at Binarly.

LogoFAIL is a security vulnerability and exploit thereof that affects computer motherboard firmware with TianoCore EDK II, including Insyde Software's InsydeH2O modules and similar code in AMI and Phoenix firmware, which are commonly found on both Intel and AMD motherboards, and which enable loading of custom boot logos. The exploit was discovered in December 2023 by researchers at Binarly.

Description

The vulnerability exists when the Driver Execution Environment (DXE) is active after a successful Power On Self Test (POST) in the UEFI firmware (also known as the BIOS). The UEFI's boot logo is replaced with the exploit payload at this point, and the exploit can then take control of the system.

Patches

Intel patched the issue in Intel Management Engine (ME) version 16.1.30.2307 in December 2023. AMD addressed the problem in AGESA version 1.2.0.b, although some motherboard manufacturers did not include the fix under AGESA 1.2.0.c.

External links

CVE-2023-40238 Binarly analysis of LogoFAIL

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372521853 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.