Lorica segmentata
.
≈ 3 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
. The lorica segmentata ( ), also called lorica lamminata, or banded armor is a type of personal armor used by soldiers of the Roman army, consisting of metal strips fashioned into overlapping or interlocking circular bands, fastened internally and held in place on the body with leather straps.
Torso armor of this type was probably in use by various Roman legions from approximately the beginning of the 1st century AD, until at least the mid part of the 3rd century AD. The lorica segmentata has come to be viewed as symbolic of the Roman legions in popular culture.
Etymology
aries marching across a pontoon bridge, a relief scene from the column of Emperor Trajan (r. 98-117 AD) in Rome, Italy (monochrome photographs by Conrad Cichorius) In Latin, the name translates to "segmented cuirass". However, this name was not given to the armor by the Romans. Instead, it was given by scholars in the 16th century.
Despite the lack of knowledge on the Roman name for the armor, scholars can make educated guesses on the Roman name. It is obvious the name had the word in it. However, the following part of the name is unknown.
Some scholars believe that the name was . This theory is based on the Romans referring to sheets of metal as , although no firm evidence for any theory regarding the name of the armor currently exists.
Construction
The plates in the lorica segmentata armor were made by overlapping ferrous plates that were then riveted to straps made from leather. It is unknown what animal was used to make the leather and if it was tanned or tawed. The plates were made of soft iron on the inside and rolled mild steel on the outside.
This made the plates hardened against damage without making them brittle. This case-hardening was done by packing organic matter tightly around them and heating them in a forge, transferring carbon from the burnt materials into the surface of the metal. The plates were made from beating out ingots.
The strips were arranged horizontally on the body, overlapping downwards, and they surrounded the torso in two halves, being fastened at the front and back. Additional strips, shoulder guards, breastplates, and backplates were used to protect the upper body and the shoulders.
The form of the armor allowed it to be stored very compactly, since it was possible to separate it into four sections, each of which would collapse on itself into a compact mass. The fitments that closed the various plate sections together (buckles, lobate hinges, hinged straps, tie-hooks, tie-rings, etc.) were made of brass.
In later variants dating from around 75–80 AD, the fastenings of the armor were simplified. Bronze hinges were removed in favor of simple rivets, belt fastenings used small hooks, and the lowest two girdle plates were replaced by one broad plate. The component parts of the lorica segmentata moved in synchronization with the other parts.
This made the armor more flexible. The armor was very long lasting. The Kalkriese type of armor lasted 55 years, the Corbridge armor lasted 70 years, and the Newstead type lasted 90 years.
External links
Illustrates third century finds of in Spain. Photographs of ancient originals.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373581264 under CC BY-SA 4.0; modifications have been made.