Lotus 41

The Lotus 41 was a Lotus Formula 3 and Formula 2 racing car which ran from 1966 - 1968.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Lotus 41 was a Lotus Formula 3 and Formula 2 racing car which ran from 1966 - 1968. John Joyce, Bowin Cars founder, was the Lotus chief designer and was assisted by Dave Baldwin. They started with a clean sheet of paper.

The chassis was a welded tubular steel space frame. The racing classes of this period imposed minimum weight requirements, so steel could be used in place of aluminium without a weight penalty.

The most notable feature of the new design was the extensive use of stressed steel panels in the bulkheads, welded steel around the footwell and the instrument panel, a welded sheet of steel surrounding the driver's shoulder, and a double-sided steel cradle surrounding the gearbox. Floors were also welded for additional stiffness.

Another clever design feature of the Type 41 was the use of a rear bulkhead as an oil overflow collector. Even the front oil tank had its overflow routed through a labyrinthine path using chassis tubes all the way to the back.

The chassis of the Formula 2 Type 41 was also considered as the bases for a possible sports-racing car, using the Type 868 V8 engine of 500 bhp, although nothing eventually came of these plans.

The Lotus 41 was a Lotus Formula 3 and Formula 2 racing car which ran from 1966 - 1968. John Joyce, Bowin Cars founder, was the Lotus chief designer and was assisted by Dave Baldwin. They started with a clean sheet of paper.

The chassis was a welded tubular steel space frame. The racing classes of this period imposed minimum weight requirements, so steel could be used in place of aluminium without a weight penalty.

The most notable feature of the new design was the extensive use of stressed steel panels in the bulkheads, welded steel around the footwell and the instrument panel, a welded sheet of steel surrounding the driver's shoulder, and a double-sided steel cradle surrounding the gearbox. Floors were also welded for additional stiffness.

Another clever design feature of the Type 41 was the use of a rear bulkhead as an oil overflow collector. Even the front oil tank had its overflow routed through a labyrinthine path using chassis tubes all the way to the back.

The chassis of the Formula 2 Type 41 was also considered as the bases for a possible sports-racing car, using the Type 868 V8 engine of 500 bhp, although nothing eventually came of these plans. File:Lotus 41C Ford-Cosworth.jpg|A Lotus 41C File:Derek Bell Goodwood 2008.jpg|Derek Bell demonstrating a Lotus 41 at Goodwood Festival of Speed

Text derived from https://en.wikipedia.org/w/index.php?oldid=1293967389 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.