Lesson plan

LTR Standard

Within radio technology, LTR (Logic Trunked Radio) Standard systems have no dedicated control channel. All control data is sent as subaudible data along with voice transmissions. Each system site can have any number of radio channels from 1 through a maximum of 20. Each channel is made up of one channel controller connected to one radio repeater operating on one frequency. One controller is assigned as the master or system controller and all the other controllers report to it via a trunking data bus. This connection allows all the repeaters at a site to operate as one LTR system. Each channel in the system is assigned a unique number (01 through 20) and these need not be sequentially assigned. Each subscriber radio must be programmed with all channels in the system in proper logical channel order (the same requirement as EDACS systems). LTR Standard Talkgroups are written in the format A-HH-GGG. * "A" is the area code and is either 0 or 1. The area code is the same for all Talkgroups in a given system site and is arbitrarily chosen by the system operator; the most common use is to simply distinguish between Talkgroups on multiple systems with geographical overlap. * "HH" is the home repeater number and has twenty possible values, 01 through 20, always noted as two digits.…

Back to article

Article summary

Within radio technology, LTR (Logic Trunked Radio) Standard systems have no dedicated control channel. All control data is sent as subaudible data along with voice transmissions. Each system site can have any number of radio channels from 1 through a maximum of 20. Each channel is made up of one channel controller connected to one radio repeater operating on one frequency. One controller is assigned as the master or system controller and all the other controllers report to it via a trunking data bus. This connection allows all the repeaters at a site to operate as one LTR system. Each channel in the system is assigned a unique number (01 through 20) and these need not be sequentially assigned. Each subscriber radio must be programmed with all channels in the system in proper logical channel order (the same requirement as EDACS systems). LTR Standard Talkgroups are written in the format A-HH-GGG. * "A" is the area code and is either 0 or 1. The area code is the same for all Talkgroups in a given system site and is arbitrarily chosen by the system operator; the most common use is to simply distinguish between Talkgroups on multiple systems with geographical overlap. * "HH" is the home repeater number and has twenty possible values, 01 through 20, always noted as two digits.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.