Lunarcrete
hypothetical aggregate building material, similar to concrete, formed from lunar regolith
≈ 4 min read
Names in other languages
- ItalianoCalcestruzzo lunare
- FrançaisBéton lunaire
- EnglishLunarcrete
- 日本語ルナクリート
- 中文月球混凝土
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Lunarcrete, also known as "mooncrete", an idea first proposed by Larry A. Beyer of the University of Pittsburgh in 1985, is a hypothetical construction aggregate, similar to concrete, formed from lunar regolith, that would reduce the construction costs of building on the Moon. AstroCrete is a more general concept also applicable for Mars.
Sulfur-based waterless concrete
This proposal is based on the observation that water is likely to be a precious commodity on the Moon. Additionally, sulfur gains strength in a very short time and does not need any period of cooling, unlike hydraulic cement. This would reduce the time that human astronauts would need to be exposed to the surface lunar environment.
Sulfur is present on the Moon in the form of the mineral troilite (FeS), and could be reduced to obtain sulfur. It also does not require the extremely high temperatures needed for extraction of cementitious components (e.g. anorthosites). Sulfur concrete is an established construction material.
Strictly speaking it is not a concrete as there is little by way of chemical reaction. Instead the sulfur acts as a thermoplastic material binding with a non reactive substrate. Cement and water are not required.
The concrete does not have to be cured, instead it is simply heated to above the melting point of sulfur, 140 °C, and after cooling it reaches high strength immediately. The best mixture for tensile and compressive strength is 65% JSC-1 lunar regolith simulant and 35% sulfur, with an average compressive strength of 33.8 MPa and tensile strength of 3.7 MPa.
Addition of 2% metal fiber increase the compressive strength to 43.0 MPa Addition of silica also increases the strength of the concrete. This sulfur concrete could be of especial value for dust minimization, for instance to create a launching pad for rockets leaving the Moon.
Issues with sulfur concrete
It provides less protection from cosmic radiation, so walls would need to be thicker than Portland-cement-based concrete walls (the water in concrete is an especially good absorber of cosmic radiation). Sulfur melts at 115.2 °C, and lunar temperatures in high latitudes can reach 123 °C at midday.
In addition, the temperature changes could change the volume of the sulfur concrete due to polymorphic transitions in the sulfur. See Allotropes of sulfur.
So unprotected sulfur concrete on the Moon, if directly exposed to the surface temperatures, would need to be limited to higher latitudes or shaded locations with maximum temperatures less than 96 °C and monthly variations not exceeding 114 °C. The material would degrade through repeated temperature cycles, but the effects are likely to be less extreme on the Moon due to the slowness of the monthly temperature cycle. The outer few millimeters may be damaged through sputtering from impact of high energy particles from the solar wind and solar flares.
This may however be easy to repair, by reheating or recoating the surface layers in order to sinter away cracks and heal the damage.
AstroCrete
AstroCrete is a concrete-like material proposed to be used on Moon or Mars made from regolith and human serum albumin (HSA), a protein from human blood. Scientists demonstrated that such material had compressive strengths as high as 25 MPa, while ordinary concrete had 20–32 MPa.
By adding urea (byproduct in urine, sweat, and tears), the resultant material became substantially stronger than ordinary concrete, with 40 MPa of compressive strength. As noted by the authors: Researchers also experimented with synthetic spider silk and bovine serum albumin as regolith binders, noting that these materials could also be produced on Mars after advancements in biomanufacturing technology.
The idea behind AstroCrete is not new, that is acknowledged by authors: "adhesives and binders of biological origin were widely utilized by humanity for millennia before the development of synthetic petroleum-derived adhesives. Tree resins, collagen from hooves, casein from cheese, and animal blood were all used as binders and additives for various applications".
Researchers calculated that a crew of 6 astronauts could produce over 500 kg of AstroCrete over the course of a two-year mission on the surface of Mars. Each astronaut "could produce enough additional habitat space to support another astronaut, potentially allowing the steady expansion of an early Martian colony".
In 2023, A.D. Roberts, wrote a story on the use of 'AstroCrete' being tested in the creation of a building material on Mars in order to overcome the challenge of obtaining bulk material for construction on the planet.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1358101894 under CC BY-SA 4.0; modifications have been made.