M-LOK

semi-automatic rifle M-LOK, for Modular Lock, is a firearm rail interface system developed and patented by Magpul Industries.

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

semi-automatic rifle M-LOK, for Modular Lock, is a firearm rail interface system developed and patented by Magpul Industries. The license is free-of-charge, but subject to an approval process.

M-LOK allows for direct accessory attachment onto the "negative space" (hollow slot) mounting points, and is a competing standard to VLTOR's open sourced KeyMod system for replacing the ubiquitous Picatinny rail in some applications. Both M-LOK and KeyMod enable the user to have a slimmer, lighter, smoother and more fenestrated handguard/fore-end with accessories and gadgets mounted only where needed as compared to a Picatinny handguard, which typically has whole length rail slots, resulting in a heavier weight, bulkier handguard and poorer barrel ventilation, resulting in the barrel overheating more quickly.

The M-LOK system can be seen as an evolution of the Magpul Original Equipment (MOE) system, but the two are not fully compatible. Though newer M-LOK accessories can be used on older MOE slot handguards if an adaptor plate is used, there is no adaptor available for using older MOE accessories on the newer M-LOK handguards.

Rail specifications

The slot dimensions (used on handguards, etc.) are available on the web. The slots provide metric length intervals, and accessories can be mounted either within a slot or bridging between slots, making it possible to adjust the position of accessories in smaller intervals than the length of the slot. The slots on an M-Lok handguard are approximately long and wide and space from each other. The radius of the corners is approximately .

Attachment specifications

The quarter-turn T-slot nuts have different torque specifications depending on the handguard material: for attaching metal accessories to metal handguards. for attaching polymer or metal accessories to polymer handguards. for attaching polymer accessories to metal handguards. Attachment screws made by many U.S. manufacturers are often either #8-32 TPI or 10-24 TPI UNC threads, which respectively have major thread diameters of 0.1640 inches and 0.1900 inches (4.166-0.794 mm and 4.826-1.058 mm expressed in metric designation).

Many M-LOK screws on the international market instead use either M4 or M5 metric threads to reduce cost. The tool required for mounting, in addition to the thread size, also depends the screw head type. Hex keys are used extensively in the firearms industry, but metric and imperial hex keys as a general rule are not compatible.

It is possible to damage the tool and screw by selecting a tool that is too small for the fastener, which can be done by using an imperial tool on a metric fastener, or the converse. An exception to this is 4 mm hex keys, which are almost the exact same size as .

In many industries, this makes hex keys preferred for consumer products because end users can successfully use an imperial key on a metric fastener, and vice versa. While screw and slot dimensions are available on the web, the T-slot nut dimensions are currently under review by the US State Department to determine whether it should be regulated by ITAR, and until it is clarified drawings are only available to US citizens.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370277952 under CC BY-SA 4.0; modifications have been made.

Words in each sectionAttachment specificatio…Attachment specificationsAttachment specifications: 283 words283Rail specificationsRail specificationsRail specifications: 72 words72
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001370277952 · captured 2026-08-20 · ledger · version history

Cite this page as: encyclopegia.org, “M-LOK”, snapshot enwiki-001370277952. https://encyclopegia.org/a/m-lok

Sources cited in this revision

9 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.