Lesson plan

Machine head

A machine head (also referred to as a tuning machine, tuner, or gear head) is a geared apparatus for tuning stringed musical instruments by adjusting string tension. Machine heads are used on mandolins, guitars, double basses, and others, and are usually located on the instrument's headstock. Other names for guitar tuners include pegs, gears, machines, cranks, knobs, tensioners, and tighteners. Non-geared tuning devices as used on violins, violas, cellos, lutes, older Flamenco guitars, and ukuleles are known as friction pegs, which hold the string to tension by way of friction caused by their tapered shape and the string pull created by the tight string.

Back to article

Article summary

A machine head (also referred to as a tuning machine, tuner, or gear head) is a geared apparatus for tuning stringed musical instruments by adjusting string tension. Machine heads are used on mandolins, guitars, double basses, and others, and are usually located on the instrument's headstock. Other names for guitar tuners include pegs, gears, machines, cranks, knobs, tensioners, and tighteners. Non-geared tuning devices as used on violins, violas, cellos, lutes, older Flamenco guitars, and ukuleles are known as friction pegs, which hold the string to tension by way of friction caused by their tapered shape and the string pull created by the tight string.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.