Macroemulsion

Uses your system voice; voice and rate in settings.

Q6725269Snapshot

≈ 6 min read

Names in other languages

  • EnglishMacroemulsion

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Macroemulsions are dispersed liquid-liquid, thermodynamically unstable systems with particle sizes ranging from 1 to 100 μm (orders of magnitude), which, most often, do not form spontaneously. Macroemulsions scatter light effectively and therefore appear milky, because their droplets are greater than a wavelength of light. They are part of a larger family of emulsions along with miniemulsions (or nanoemulsions). As with all emulsions, one phase serves as the dispersing agent. It is often called the continuous or outer phase.

The remaining phase(s) are disperse or inner phase(s), because the liquid droplets are finely distributed amongst the larger continuous phase droplets. This type of emulsion is thermodynamically unstable, but can be stabilized for a period of time with applications of kinetic energy. Surfactants (as the main emulsifiers) are used to reduce the interfacial tension between the two phases, and induce macroemulsion stability for a useful amount of time. Emulsions can be stabilized otherwise with polymers, solid particles (Pickering emulsions) or proteins.

Macroemulsions are dispersed liquid-liquid, thermodynamically unstable systems with particle sizes ranging from 1 to 100 μm (orders of magnitude), which, most often, do not form spontaneously. Macroemulsions scatter light effectively and therefore appear milky, because their droplets are greater than a wavelength of light. They are part of a larger family of emulsions along with miniemulsions (or nanoemulsions). As with all emulsions, one phase serves as the dispersing agent. It is often called the continuous or outer phase.

The remaining phase(s) are disperse or inner phase(s), because the liquid droplets are finely distributed amongst the larger continuous phase droplets. This type of emulsion is thermodynamically unstable, but can be stabilized for a period of time with applications of kinetic energy. Surfactants (as the main emulsifiers) are used to reduce the interfacial tension between the two phases, and induce macroemulsion stability for a useful amount of time.

Emulsions can be stabilized otherwise with polymers, solid particles (Pickering emulsions) or proteins. \Delta G_{\rm em} = 3{\gamma V\over\ R_{\rm f}} Where \Delta G_{\rm em} is the energy Input, \gamma is the interfacial tension between the two phases, V is the total volume of the mixture, and R_{\rm f} is the average radius of the newly created emulsions This equation gives the energy requirement just to separate the particles.

In practice the energy cost is much higher, as most of the mechanical energy is simply converted to heat rather than mixing the phases. There are other ways to create emulsions between two liquids, such as adding one phase with droplets already being the required size. An emulsifying agent of some sort is also generally required. This helps form emulsions by reducing the interfacial tension between the two phases, usually by acting as a surfactant and adsorbing to the interface.

This works because most emulsifiers have a hydrophilic and hydrophobic side, which means they can bond with both the oil-like phase and the water-like phase, thus reducing the number of water-oil molecular interactions at the surface. Reducing the number of these interactions reduces the interfacial energy, thus causing the emulsions to become more stable. The concentration of surfactant needed is much higher than its critical micelle concentration (CMC). This forms a surfactant monolayer which orients itself to minimize its surface to volume ratio.

This ratio yields highly polydisperse spherical droplets in the range of 1 to 100 μm. The probability (P) of finding a certain sized droplet can be estimated for inner layer drops through the following equation: \ P = {{\ 1 \over\Delta R \sqrt{ 2 \pi\, } \ } \exp[{ \ ( \ln{R} \ - \ln{\bar{R}} \ )^2 \over\ 2 \Delta R^2 \ \ } \ }] where R is the radius of the droplet, \bar{R} \ is the mean radius, and \Delta R \ is the standard deviation.

Determining which phase is the continuous phase and which phase is the dispersed phase is done by using the Bancroft Rule when the two phases have similar mole fractions. This rule states that the phase which the emulsifier is the most soluble in will be the continuous phase, even if it has a smaller volume fraction overall. For example, a mixture that is 60% Water and 40% Oil can form an emulsion where the water is the dispersed phase and the oil is the continuous phase if the emulsifier is more soluble in the oil.

This is because the continuous phase is the phase that can coalesce the fastest upon mixing, which means it is the phase that can diffuse the emulsifying agent away from its own interfaces and into the bulk the fastest. It seems that this rule is very well followed in the case of surfactant-stabilized emulsions, but not for Pickering emulsions. For mixtures with overwhelmingly large amounts of one phase, the largest phase will often become the continuous phase.

However, highly concentrated emulsions (looking like 'liquid-liquid foams') can also be obtained and stabilized.

Flocculation

Flocculation occurs when the dispersed drops group together throughout the continuous phase, but don't lose their individual identities. The driving force for flocculation is a weak van der Waals attraction between drops at large distances, which is known as the secondary energy minimum. An electrostatic repulsion between the surfaces prevents the drops from touching and merging, stabilizing the macroemulsion.

The rate of diffusion limited encounters is equal to the upper limit for the decrease in droplet concentration and can be represented by the following equation: \frac{dc}{dt}=-8\pi\,DRc^2 where D can be found using the Stokes-Einstein relation D=\frac{k_B T}{6\pi\,\eta\,R} , R is the droplet radius, and c is the number of droplets per unit volume. This equation can be reduced to the following: \frac{dc}{dt}=-k_fc^2 where k_f is the rate constant of flocculation (k_f=\frac{4k_BT}{3\eta\,}) .

If the droplet radii are not all the same size and aggregation occurs, the flocculation rate constant is equal to \frac{8k_BT}{3\eta\,} .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375509942 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot macroemulsion-760794-724e22f568cc40f0 · hash 724e22f568cc40f0a77602a8b85114689729c71ba41291597c9f54ae6c267de8 · captured 1789705387.0 · version history

Cite this page as: encyclopegia.org, “Macroemulsion”, snapshot macroemulsion-760794-724e22f568cc40f0. https://encyclopegia.org/a/macroemulsion

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.