Lesson plan

MadeInGermany

MadeInGermany was a driverless car developed by the Freie Universität Berlin and AutoNOMOS Labs in 2011. MadeInGermany is a Volkswagen Passat Variant 3C with a built-in drive-by-wire control. It measures in length, in width, and in height with a total weight of 1.7 tons. Furthermore, it is equipped with a 2.0 liter Turbocharged Stratified Injection (TSI) engine. Parts of the CAN gateway interfaces have been opened by Volkswagen for research purposes so that a computer can access and control the car. In addition, various lidar and radar scanners are integrated into the vehicle's chassis without exceeding the ex factory measurements of the vehicle (except for the Velodyne sensor). The sensor configuration is designed to have a 360-degree field of view around the car with redundant coverage. The Velodyne and six Ibeo LUX laser scanners cover almost any area around the car for up to . In addition, radar sensors from TRW, Hella, and SMS support the sensor fusion process by adding accurate velocity information about surroundings objects. Camera sensors are used for lane detection, traffic light detection, and stereo vision. After participating in the DARPA Urban Challenge, the research focus of Freie Universität Berlin shifted to driving in heavy traffic in crowded city environments like Berlin, Germany, itself.…

Back to article

Article summary

MadeInGermany was a driverless car developed by the Freie Universität Berlin and AutoNOMOS Labs in 2011. MadeInGermany is a Volkswagen Passat Variant 3C with a built-in drive-by-wire control. It measures in length, in width, and in height with a total weight of 1.7 tons. Furthermore, it is equipped with a 2.0 liter Turbocharged Stratified Injection (TSI) engine. Parts of the CAN gateway interfaces have been opened by Volkswagen for research purposes so that a computer can access and control the car. In addition, various lidar and radar scanners are integrated into the vehicle's chassis without exceeding the ex factory measurements of the vehicle (except for the Velodyne sensor). The sensor configuration is designed to have a 360-degree field of view around the car with redundant coverage. The Velodyne and six Ibeo LUX laser scanners cover almost any area around the car for up to . In addition, radar sensors from TRW, Hella, and SMS support the sensor fusion process by adding accurate velocity information about surroundings objects. Camera sensors are used for lane detection, traffic light detection, and stereo vision. After participating in the DARPA Urban Challenge, the research focus of Freie Universität Berlin shifted to driving in heavy traffic in crowded city environments like Berlin, Germany, itself.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.