Madelung constant
сonstant in crystallography
≈ 4 min read
Names in other languages
- Portuguêsconstante de Madelung
- Русскийпостоянная Маделунга
- DeutschMadelung-Konstante
- EnglishMadelung constant
- فارسیثابت مادلونگ
- 한국어마델룽 상수
- 简体中文马德隆常数
- 繁體中文馬德隆常數
- 中文馬德隆常數
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Madelung constant is used in determining the electrostatic potential of a single ion in a crystal by approximating the ions by point charges. It is named after Erwin Madelung, a German physicist. Because the anions and cations in an ionic solid attract each other by virtue of their opposing charges, separating the ions requires a certain amount of energy.
This energy must be given to the system in order to break the anion–cation bonds. The energy required to break these bonds for one mole of an ionic solid under standard conditions is the lattice energy. V_i = \frac{e}{4 \pi \varepsilon_0 } \sum_{j \neq i} \frac{z_j}{r_{ij}}\,\! where r_{ij} = |r_i-r_j| is the distance between the th and the th ion.
In addition, number of charges of the th ion the elementary charge, 1.6022 C ; is the permittivity of free space. If the distances are normalized to the nearest neighbor distance , the potential may be written V_i = \frac{e}{4 \pi \varepsilon_0 r_0 } \sum_{j} \frac{z_j r_0}{r_{ij}} = \frac{e}{4 \pi \varepsilon_0 r_0 } M_i with being the (dimensionless) Madelung constant of the th ion M_i = \sum_{j} \frac{z_j}{r_{ij}/r_0}.
Another convention is to base the reference length on the cubic root of the unit cell volume, which for cubic systems is equal to the lattice constant. Thus, the Madelung constant then reads \overline{M}_i = \sum_{j} \frac{z_j}{r_{ij}/w}=M_i \frac{w} {r_0}.
The electrostatic energy of the ion at site then is the product of its charge with the potential acting at its site E_{el,i} = z_ieV_i = \frac{e^2}{4 \pi \varepsilon_0 r_0 } z_i M_i. There occur as many Madelung constants in a crystal structure as ions occupy different lattice sites. For example, for the ionic crystal NaCl, there arise two Madelung constants – one for Na and another for Cl.
Since both ions, however, occupy lattice sites of the same symmetry they both are of the same magnitude and differ only by sign. The electrical charge of the and ion are assumed to be onefold positive and negative, respectively, and .
The nearest neighbour distance amounts to half the lattice constant of the cubic unit cell r_0=\tfrac a 2 and the Madelung constants become M_\text{Na}=-M_\text{Cl} = {\sum_{j,k,\ell=-\infty}^\infty}\!\!\!\!^\prime \ \ {{(-1)^{j+k+\ell}} \over \sqrt{j^2 + k^2 + \ell^2}}. The prime indicates that the term j=k=\ell=0 is to be left out.
Since this sum is conditionally convergent it is not suitable as definition of Madelung's constant unless the order of summation is also specified. There are two "obvious" methods of summing this series, by expanding cubes or expanding spheres.
Although the latter is often found in the literature, M = -6 + \frac{12}{\sqrt 2} - \frac{8}{\sqrt 3} + \frac{6}{2} - \frac{24}{\sqrt 5} + \dots it fails to converge, as was shown by Emersleben in 1951. The summation over expanding cubes converges to the correct value, although very slowly.
An alternative summation procedure, presented by Borwein, Borwein and Taylor, uses analytic continuation of an absolutely convergent series. There are many practical methods for calculating Madelung's constant using either direct summation (for example, the Evjen method ) or integral transforms, which are used in the Ewald method.
A fast converging formula for the Madelung constant of NaCl is 12 \, \pi \sum_{m, n \geq 1, \, \mathrm{odd}} \operatorname{sech}^2\left(\frac{\pi}{2}(m^2+n^2)^{1/2}\right) The continuous reduction of with decreasing coordination number for the three cubic AB compounds (when accounting for the doubled charges in ZnS) explains the observed propensity of alkali halides to crystallize in the structure with highest compatible with their ionic radii. Note also how the fluorite structure being intermediate between the caesium chloride and sphalerite structures is reflected in the Madelung constants.
The electrostatic interaction model of ions in solids has thus been extended to a point multipole concept that also includes higher multipole moments like dipoles, quadrupoles etc. These concepts require the determination of higher order Madelung constants or so-called electrostatic lattice constants. The proper calculation of electrostatic lattice constants has to consider the crystallographic point groups of ionic lattice sites; for instance, dipole moments may only arise on polar lattice sites, i. e. exhibiting a C 1 , C 1h , C n or C nv site symmetry (n = 2, 3, 4 or 6).
These second order Madelung constants turned out to have significant effects on the lattice energy and other physical properties of heteropolar crystals.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369235306 under CC BY-SA 4.0; modifications have been made.