Magnetic drilling machine

of mild steel A magnetic drilling machine is a portable drilling machine with a magnetic base (either electromagnetic or permanent magnet).

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

of mild steel A magnetic drilling machine is a portable drilling machine with a magnetic base (either electromagnetic or permanent magnet). It can use twist drill bits, annular cutters, milling cutters, and other rotary cutters. With suitable bits it can also tap threads, ream, and countersink.

Its combination of a stable magnetic base and low RPM help resist or reduce torque forces created by large diameter bits. Magnetic drilling machines with reversible motor and variable speed controls can also perform operations like tapping, countersink and reaming. A magnetic drilling machine with a cross table base can also perform light milling.

Operation

Drilling holes with a magnetic drilling machine is a three-step process: The pilot pin accurately centers the cutter over the area to be drilled. During drilling, the pilot pin retracts and allows the internal lubrication to reach the cutting teeth. When the hole is complete, the slug/core is automatically ejected from the cutter, leaving an accurate, finished hole.

High-quality precision-engineered cutters may have tapered inner walls. These help offset the effect of frictional heat build-up that causes expansion of both the cutter and waste slug being produced by the cutting action, allowing ready ejection of the slug upon completion.

Control system: The drill will not rotate unless the magnet field is on. The control system detects the magnetic field and then allows for rotation. This is a safety measure as well as a practical need as if the drill rotates the drilling cutter before the magnetic field is on it might be dangerous. The method used by each manufacturer to detect the field can be by a hall cell sensor, reed switch or other unknown method.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1369008266 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001369008266 · captured 2026-08-12 · ledger · version history

Cite this page as: encyclopegia.org, “Magnetic drilling machine”, snapshot enwiki-001369008266. https://encyclopegia.org/a/magnetic-drilling-machine

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.