Magnetocaloric effect
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
alloy heats up inside the magnetic field and loses thermal energy to the environment, so it exits the field and becomes cooler than when it entered. The magnetocaloric effect (MCE, from magnet and calorie) is a phenomenon in which certain materials warm up when a magnetic field is applied. The warming is due to changes in the internal state of the material, which releases heat. When the magnetic field is removed, the material returns to its original state, reabsorbing the heat, and returning to original temperature.
This can be used to achieve refrigeration, by allowing the material to radiate away its heat while in the magnetized hot state. Removing the magnetism, the material then cools to below its original temperature. The effect was first observed in 1881 by German physicist Emil Warburg, followed by French and Swiss physicists Pierre Weiss and Auguste Piccard in 1917. The fundamental principle was suggested by American chemists Peter Debye (1926) and William Giauque (1927).
The first working magnetic refrigerators were constructed by several groups beginning in 1933. Magnetic refrigeration was the first method developed for cooling below about 0.3 K (the lowest temperature attainable before magnetic refrigeration, by pumping on vapors). The magnetocaloric effect can be used to attain extremely low temperatures, as well as the ranges used in common refrigerators.
alloy heats up inside the magnetic field and loses thermal energy to the environment, so it exits the field and becomes cooler than when it entered. The magnetocaloric effect (MCE, from magnet and calorie) is a phenomenon in which certain materials warm up when a magnetic field is applied. The warming is due to changes in the internal state of the material, which releases heat. When the magnetic field is removed, the material returns to its original state, reabsorbing the heat, and returning to original temperature.
This can be used to achieve refrigeration, by allowing the material to radiate away its heat while in the magnetized hot state. Removing the magnetism, the material then cools to below its original temperature. The effect was first observed in 1881 by German physicist Emil Warburg, followed by French and Swiss physicists Pierre Weiss and Auguste Piccard in 1917. The fundamental principle was suggested by American chemists Peter Debye (1926) and William Giauque (1927).
The first working magnetic refrigerators were constructed by several groups beginning in 1933. Magnetic refrigeration was the first method developed for cooling below about 0.3 K (the lowest temperature attainable before magnetic refrigeration, by pumping on vapors).
The magnetocaloric effect can be used to attain extremely low temperatures, as well as the ranges used in common refrigerators. \Delta T_\mathrm{ad} = -\int\limits_{H_0}^{H_1} \left(\frac {T}{C(T,H)}\right)_{\!\!H} {\left(\frac {\partial M(T,H)}{\partial T}\right)}_{\!\!H} dH where is the adiabatic change in temperature of the magnetic system around temperature ; is the applied external magnetic field; is the heat capacity of the working magnet (refrigerant); and is the magnetization of the refrigerant.
From the equation we can see that the magnetocaloric effect can be enhanced by: a large field variation a magnet material with a small heat capacity a magnet with large changes in net magnetization vs. temperature, at constant magnetic field The adiabatic change in temperature can be seen to be related to the magnet's change in magnetic entropy ( ) since \Delta S(T) = \int\limits_{H_0}^{H_1}\left(\frac{\partial M(T,H')}{\partial T} \right)dH' This implies that the absolute change in the magnet's entropy determines the possible magnitude of the adiabatic temperature change under a thermodynamic cycle of magnetic field variation.
(X = Ga, Co, In, Al, Sb) Heusler alloys are also promising candidates for magnetic cooling applications because they have Curie temperatures near room temperature and, depending on composition, can have martensitic phase transformations near room temperature. These materials exhibit the magnetic shape memory effect and can also be used as actuators, energy harvesting devices, and sensors.
When the martensitic transformation temperature and the Curie temperature are the same (based on composition) the magnitude of the magnetic entropy change is the largest. In February 2014, GE announced the development of a functional Ni-Mn-based magnetic refrigerator. The development of this technology is very material-dependent and will likely not replace vapor-compression refrigeration without significantly improved materials that are cheap, abundant, and exhibit much larger magnetocaloric effects over a larger range of temperatures.
Such materials need to show significant temperature changes under a field of two tesla or less, so that permanent magnets can be used for the production of the magnetic field.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1372773203 under CC BY-SA 4.0; modifications have been made.