Magnetostriction

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Magnetostriction is a property of magnetic materials that causes them to change their shape or dimensions during the process of magnetization. The variation of materials' magnetization due to the applied magnetic field changes the magnetostrictive strain until reaching its saturation value, λ. The effect was first identified in 1842 by James Joule when observing a sample of iron. Magnetostriction applies to magnetic fields, while electrostriction applies to electric fields. Magnetostriction causes energy loss due to frictional heating in susceptible ferromagnetic cores, and is also responsible for the low-pitched humming sound that can be heard coming from transformers, where alternating currents produce a changing magnetic field.

Magnetostriction is a property of magnetic materials that causes them to change their shape or dimensions during the process of magnetization. The variation of materials' magnetization due to the applied magnetic field changes the magnetostrictive strain until reaching its saturation value, λ. The effect was first identified in 1842 by James Joule when observing a sample of iron. Magnetostriction applies to magnetic fields, while electrostriction applies to electric fields. Magnetostriction causes energy loss due to frictional heating in susceptible ferromagnetic cores, and is also responsible for the low-pitched humming sound that can be heard coming from transformers, where alternating currents produce a changing magnetic field.

Mechanical behaviors of magnetostrictive alloys

Effect of microstructure on elastic strain alloys

Single-crystal alloys exhibit superior microstrain, but are vulnerable to yielding due to the anisotropic mechanical properties of most metals. It has been observed that for polycrystalline alloys with a high area coverage of preferential grains for microstrain, the mechanical properties (ductility) of magnetostrictive alloys can be significantly improved.

Targeted metallurgical processing steps promote abnormal grain growth of {011} grains in galfenol and alfenol thin sheets, which contain two easy axes for magnetic domain alignment during magnetostriction. This can be accomplished by adding particles such as boride species and niobium carbide ( ) during initial chill casting of the ingot.

For a polycrystalline alloy, an established formula for the magnetostriction, λ, from known directional microstrain measurements is: λ s = 1/5(2λ 100 +3λ 111 ) During subsequent hot rolling and recrystallization steps, particle strengthening occurs in which the particles introduce a "pinning" force at grain boundaries that hinders normal (stochastic) grain growth in an annealing step assisted by a atmosphere.

Thus, single-crystal-like texture (~90% {011} grain coverage) is attainable, reducing the interference with magnetic domain alignment and increasing microstrain attainable for polycrystalline alloys as measured by semiconducting strain gauges. These surface textures can be visualized using electron backscatter diffraction (EBSD) or related diffraction techniques.

Compressive stress to induce domain alignment

For actuator applications, maximum rotation of magnetic moments leads to the highest possible magnetostriction output. This can be achieved by processing techniques such as stress annealing and field annealing. However, mechanical pre-stresses can also be applied to thin sheets to induce alignment perpendicular to actuation as long as the stress is below the buckling limit. For example, it has been demonstrated that applied compressive pre-stress of up to ~50 MPa can result in an increase of magnetostriction by ~90%. This is hypothesized to be due to a "jump" in initial alignment of domains perpendicular to applied stress and improved final alignment parallel to applied stress.

Constitutive behavior of magnetostrictive materials

These materials generally show non-linear behavior with a change in applied magnetic field or stress. For small magnetic fields, linear piezomagnetic constitutive behavior is enough. Non-linear magnetic behavior is captured using a classical macroscopic model such as the Preisach model and Jiles-Atherton model. For capturing magneto-mechanical behavior, Armstrong proposed an "energy average" approach. More recently, Wahi et al. have proposed a computationally efficient constitutive model wherein constitutive behavior is captured using a "locally linearizing" scheme.

Applications

Electronic article surveillance – using magnetostriction to detect shoplifting Magnetostrictive delay lines - an earlier form of computer memory Magnetostrictive loudspeakers and headphones

See also

Electromagnetically induced acoustic noise and vibration e.g. Inverse magnetostrictive effect Wiedemann effect – a torsional force caused by magnetostriction Magnetomechanical effects for a collection of similar effects Magnetocaloric effect Electrostriction Piezoelectricity Piezomagnetism SoundBug FeONIC – developer of audio products using magnetostriction Terfenol-D Galfenol

References

External links

Magnetostriction Invisible Speakers from Feonic that use Magnetostriction Magnetostrictive alloy maker: REMA-CN

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378919706 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

8 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.