Magnus effect

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Magnus effect is a phenomenon that occurs when a spinning object is moving through a fluid. A lift force acts on the spinning object and its path may be deflected in a manner not present when it is not spinning. The strength and direction of the Magnus force is dependent on the speed and direction of the rotation of the object. The Magnus effect is named after Heinrich Gustav Magnus, the German physicist who investigated it. The force on a rotating cylinder is an example of Kutta–Joukowski lift, named after Martin Kutta and Nikolay Zhukovsky (or Joukowski), mathematicians who contributed to the knowledge of how lift is generated in a fluid flow.

The Magnus effect is a phenomenon that occurs when a spinning object is moving through a fluid. A lift force acts on the spinning object and its path may be deflected in a manner not present when it is not spinning. The strength and direction of the Magnus force is dependent on the speed and direction of the rotation of the object. The Magnus effect is named after Heinrich Gustav Magnus, the German physicist who investigated it. The force on a rotating cylinder is an example of Kutta–Joukowski lift, named after Martin Kutta and Nikolay Zhukovsky (or Joukowski), mathematicians who contributed to the knowledge of how lift is generated in a fluid flow.

Flow deflection

wake. The airflow has been deflected in the direction of spin. Air is carried around the object; this adds to the velocity of the airstream above the object and subtracts below resulting in increased airspeed above and lowered airspeed below. The wake and trailing air-flow are deflected; according to Newton's third law of motion there must be a reaction force in the opposite direction.

Pressure differences

The air's viscosity and the surface roughness of the object cause the air to be carried around the object. This adds to the air velocity on one side of the object and decreases the velocity on the other side. Bernoulli's principle states that under certain conditions increased flow speed is associated with reduced pressure, implying that there is lower air pressure on one side than the other. This pressure difference results in a force perpendicular to the direction of travel.

Kutta–Joukowski lift

On a cylinder, the force due to rotation is an example of Kutta–Joukowski lift. It can be analysed in terms of the vortex produced by rotation. The lift per unit length of the cylinder L^{\prime} , is the product of the freestream velocity v_{\infty} , the fluid density \rho_{\infty} and circulation \Gamma due to viscous effects: L^{\prime}= \rho_{\infty} v_{\infty} \Gamma, where the vortex strength (assuming that the surrounding fluid obeys the no-slip condition) is given by \Gamma = 2 \pi \omega r^2 where ω is the angular velocity of the cylinder (in rad/s) and r is the radius of the cylinder.

Magnus effect in potential flow

Potential flow is a mathematical model of the steady flow of a fluid with no viscosity or vorticity present. For potential flow around a circular cylinder, it provides the following results:

Non-spinning cylinder

for the potential flow around a circular cylinder in a uniform flow. The flow pattern is symmetric about a horizontal axis through the centre of the cylinder. At each point above the axis and its corresponding point below the axis, the spacing of streamlines is the same so velocities are also the same at the two points. Bernoulli's principle shows that, outside the boundary layers, pressures are also the same at corresponding points. There is no lift acting on the cylinder.

Spinning cylinder

have been superimposed on the parallel streamlines of a uniform flow. Streamlines are closer spaced immediately above the cylinder than below, so the air flows faster past the upper surface than past the lower surface. Bernoulli's principle shows that the pressure adjacent to the upper surface is lower than the pressure adjacent to the lower surface. The Magnus force acts vertically upwards on the cylinder. Streamlines immediately above the cylinder are curved with radius little more than the radius of the cylinder.

This means there is low pressure close to the upper surface of the cylinder. Streamlines immediately below the cylinder are curved with a larger radius than streamlines above the cylinder. This means there is higher pressure acting on the lower surface than on the upper. Air immediately above and below the cylinder is curving downwards, accelerated by the pressure gradient. A downwards force is acting on the air. Newton's third law predicts that the Magnus force and the downwards force acting on the air are equal in magnitude and opposite in direction.

Video:Applications of the Magnus effect

Text derived from https://en.wikipedia.org/w/index.php?oldid=1362714716 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

19 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.