Lesson plan

Mallite

, Cosworth Formula One car. Mallite is a type of laminate composite material, formerly manufactured by the William Mallinson & Sons company. The material is formed of a core sheet of end grain balsa wood, faced by duralumin sheets. This construction endows the finished material with greater strength and rigidity than a light alloy sheet of equal mass. The material was originally developed in the late 1950s for use in the aerospace industry, primarily for use in flooring and internal partitioning in jet airliner construction. However, it found fame as one of the first engineered composite materials to be employed in the motorsport industry. Robin Herd, formerly a designer on the Concorde project, used his aerospace knowledge to design the first McLaren single-seater racing cars. The M2A prototype used Mallite extensively, throughout its construction. The final production model, the Formula One McLaren M2B of 1966, only used Mallite for its internal skins and lower bodywork; a lack of understanding of the material's properties had led the team to design the car with conventional curved bodywork, creating problems during the fabrication process as the inherently inflexible material would not readily conform to complex, compound curvatures.…

Back to article

Article summary

, Cosworth Formula One car. Mallite is a type of laminate composite material, formerly manufactured by the William Mallinson & Sons company. The material is formed of a core sheet of end grain balsa wood, faced by duralumin sheets. This construction endows the finished material with greater strength and rigidity than a light alloy sheet of equal mass. The material was originally developed in the late 1950s for use in the aerospace industry, primarily for use in flooring and internal partitioning in jet airliner construction. However, it found fame as one of the first engineered composite materials to be employed in the motorsport industry. Robin Herd, formerly a designer on the Concorde project, used his aerospace knowledge to design the first McLaren single-seater racing cars. The M2A prototype used Mallite extensively, throughout its construction. The final production model, the Formula One McLaren M2B of 1966, only used Mallite for its internal skins and lower bodywork; a lack of understanding of the material's properties had led the team to design the car with conventional curved bodywork, creating problems during the fabrication process as the inherently inflexible material would not readily conform to complex, compound curvatures.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.