Lesson plan

Mast (sailing)

The mast of a sailing vessel is a tall spar, or arrangement of spars, erected vertically or near-vertically on the median line of a ship or boat. A mast may carry sails, spars, and derricks. It may also give necessary height to a navigation light, look-out position, signal yard, control position, radio aerial, or signal lamp. Large ships have several masts, with the size and configuration depending on the style of ship. Nearly all sailing masts are guyed. Until the mid-19th century, all vessels' masts were made of wood, formed from one or several pieces of timber. This was typically the trunk of a single conifer tree; however, from the 16th century, vessels were often built too large for that. Larger vessels needed taller and thicker masts, which could not be made from single tree trunks. To achieve the required height, these masts were built from up to four sections (also called masts). From lowest to highest, these were called "lower", "top", "topgallant", and "royal" masts. In addition, the lower sections themselves needed to be built from multiple pieces of wood to make them thick enough. Sections made from multiple pieces were known as made masts, while a section formed from a single piece was known as a pole mast. Those who specialised in making masts were known as mastmakers.

Back to article

Article summary

The mast of a sailing vessel is a tall spar, or arrangement of spars, erected vertically or near-vertically on the median line of a ship or boat. A mast may carry sails, spars, and derricks. It may also give necessary height to a navigation light, look-out position, signal yard, control position, radio aerial, or signal lamp. Large ships have several masts, with the size and configuration depending on the style of ship. Nearly all sailing masts are guyed. Until the mid-19th century, all vessels' masts were made of wood, formed from one or several pieces of timber. This was typically the trunk of a single conifer tree; however, from the 16th century, vessels were often built too large for that. Larger vessels needed taller and thicker masts, which could not be made from single tree trunks. To achieve the required height, these masts were built from up to four sections (also called masts). From lowest to highest, these were called "lower", "top", "topgallant", and "royal" masts. In addition, the lower sections themselves needed to be built from multiple pieces of wood to make them thick enough. Sections made from multiple pieces were known as made masts, while a section formed from a single piece was known as a pole mast. Those who specialised in making masts were known as mastmakers.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.