Mechanical advantage
Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system.
≈ 8 min read
Mechanical advantage. encyclopegia.org, snapshot enwiki-001374324181. /a/mechanical-advantage
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Mechanical advantage is a measure of the force amplification achieved by using a tool, mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for this is the law of the lever.
Machine components designed to manage forces and movement in this way are called mechanisms. An ideal mechanism transmits power without adding to or subtracting from it. This means the ideal machine does not include a power source, is frictionless, and is constructed from rigid bodies that do not deflect or wear.
The performance of a real system relative to this ideal is expressed in terms of efficiency factors that take into account departures from the ideal. \mathit{MA} = \frac{F_b}{F_a} = \frac{a}{b}. This is the law of the lever, which Archimedes formulated using geometric reasoning.
It shows that if the distance a from the fulcrum to where the input force is applied (point A) is greater than the distance b from fulcrum to where the output force is applied (point B), then the lever amplifies the input force. If the distance from the fulcrum to the input force is less than from the fulcrum to the output force, then the lever reduces the input force.
To Archimedes, who recognized the profound implications and practicalities of the law of the lever, has been attributed the famous claim, "Give me a place to stand and with a lever I will move the whole world." The use of velocity in the static analysis of a lever is an application of the principle of virtual work.
The power input to a gear train with a torque T A applied to the drive pulley which rotates at an angular velocity of ω A is P=T A ω A . Because the power flow is constant, the torque T B and angular velocity ω B of the output gear must satisfy the relation P = T_A \omega_A = T_B \omega_B, \! which yields \mathit{MA} = \frac{T_B}{T_A} = \frac{\omega_A}{\omega_B}. This shows that for an ideal mechanism the input-output speed ratio equals the mechanical advantage of the system.
This applies to all mechanical systems ranging from robots to linkages. v = r_A \omega_A = r_B \omega_B,\! where input gear A has radius r A and meshes with output gear B of radius r B , therefore, \frac{\omega_A}{\omega_B} = \frac{r_B}{r_A} = \frac{N_B}{N_A}. where N A is the number of teeth on the input gear and N B is the number of teeth on the output gear. The mechanical advantage of a pair of meshing gears for which the input gear has N A teeth and the output gear has N B teeth is given by \mathit{MA} = \frac{r_B}{r_A} = \frac{N_B}{N_A}.
This shows that if the output gear G B has more teeth than the input gear G A , then the gear train amplifies the input torque. If the output gear has fewer teeth than the input gear, then the gear train reduces the input torque. If the output gear of a gear train rotates more slowly than the input gear, then the gear train is called a speed reducer (Force multiplier).
In this case, because the output gear must have more teeth than the input gear, the speed reducer will amplify the input torque. v = r_A \omega_A = r_B \omega_B,\! where the input sprocket or pulley A meshes with the chain or belt along the pitch radius r A and the output sprocket or pulley B meshes with this chain or belt along the pitch radius r B , therefore \frac{\omega_A}{\omega_B} = \frac{r_B}{r_A} = \frac{N_B}{N_A}. where N A is the number of teeth on the input sprocket and N B is the number of teeth on the output sprocket. For a toothed belt drive, the number of teeth on the sprocket can be used.
For friction belt drives the pitch radius of the input and output pulleys must be used. The mechanical advantage of a pair of a chain drive or toothed belt drive with an input sprocket with N A teeth and the output sprocket has N B teeth is given by \mathit{MA} = \frac{T_B}{T_A} = \frac{N_B}{N_A}.
The mechanical advantage for friction belt drives is given by \mathit{MA} = \frac{T_B}{T_A} = \frac{r_B}{r_A}. Chains and belts dissipate power through friction, stretch and wear, which means the power output is actually less than the power input, which means the mechanical advantage of the real system will be less than that calculated for an ideal mechanism.
A chain or belt drive can lose as much as 5% of the power through the system in friction heat, deformation and wear, in which case the efficiency of the drive is 95%. \mathit{MA} = \frac{F_B}{F_A} = \frac{7}{13} = 0.54. Now, assume that the front sprockets have a choice of 28 and 52 teeth, and that the rear sprockets have a choice of 16 and 32 teeth.
Using different combinations, we can compute the following speed ratios between the front and rear sprockets The ratio of the force driving the bicycle to the force on the pedal, which is the total mechanical advantage of the bicycle, is the product of the speed ratio (or teeth ratio of output sprocket/input sprocket) and the crank-wheel lever ratio. Notice that in every case the force on the pedals is greater than the force driving the bicycle forward (in the illustration above, the corresponding backward-directed reaction force on the ground is indicated).
L = 2R + S + K, \! where K is the constant length of rope that passes over the pulleys and does not change as the block and tackle moves. The velocities V A and V B of the points A and B are related by the constant length of the rope, that is \dot{L}=2\dot{R} + \dot{S}=0, or \dot{S} = -2\dot{R}.
The negative sign shows that the velocity of the load is opposite to the velocity of the applied force, which means as we pull down on the rope the load moves up. Let V A be positive downwards and V B be positive upwards, so this relationship can be written as the speed ratio \frac{V_A}{V_B} = \frac{\dot{S}}{-\dot{R}} = 2, where 2 is the number of rope sections supporting the moving block.
Let F A be the input force applied at A the end of the rope, and let F B be the force at B on the moving block. Like the velocities F A is directed downwards and F B is directed upwards.
For an ideal block and tackle system there is no friction in the pulleys and no deflection or wear in the rope, which means the power input by the applied force F A V A must equal the power out acting on the load F B V B , that is F_A V_A = F_B V_B.\! The ratio of the output force to the input force is the mechanical advantage of an ideal gun tackle system, \mathit{MA} = \frac{F_B}{F_A} = \frac{V_A}{V_B} = 2.\!
This analysis generalizes to an ideal block and tackle with a moving block supported by n rope sections, \mathit{MA} = \frac{F_B}{F_A} = \frac{V_A}{V_B} = n.\! This shows that the force exerted by an ideal block and tackle is n times the input force, where n is the number of sections of rope that support the moving block. P = F_\text{in}v_\text{in}= F_\text{out}v_\text{out}.
The ideal mechanical advantage is the ratio of the force out of the machine (load) to the force into the machine (effort), or \mathit{IMA} = \frac {F_\text{out}} {F_\text{in}}. Applying the constant power relationship yields a formula for this ideal mechanical advantage in terms of the speed ratio: \mathit{IMA} = \frac {F_\text{out}} {F_\text{in}} = \frac {v_\text{in}} {v_\text{out}}.
The speed ratio of a machine can be calculated from its physical dimensions. The assumption of constant power thus allows use of the speed ratio to determine the maximum value for the mechanical advantage. \mathit{AMA} = \frac {F_\text{out}} {F_\text{in}}, where the input and output forces are determined experimentally.
The ratio of the experimentally determined mechanical advantage to the ideal mechanical advantage is the mechanical efficiency η of the machine, \eta =\frac\mathit{AMA}\mathit{IMA}. Mechanical advantage — video es:Velocidad de transmisión
Text derived from https://en.wikipedia.org/w/index.php?oldid=1374324181 under CC BY-SA 4.0; modifications have been made.