Mechanical equilibrium
showing the forces acting on the object.
≈ 5 min read
Mechanical equilibrium. encyclopegia.org, snapshot enwiki-001370816276. /a/mechanical-equilibrium
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
showing the forces acting on the object. The normal force N is equal, opposite, and collinear to the gravitational force mg so the net force and moment is zero. Consequently, the object is in a state of static mechanical equilibrium.
In classical mechanics, a particle is in mechanical equilibrium if the net force on that particle is zero. By extension, a physical system made up of many parts is in mechanical equilibrium if the net force on each of its individual parts is zero.
In addition to defining mechanical equilibrium in terms of force, there are many alternative definitions for mechanical equilibrium which are all mathematically equivalent. In terms of momentum, a system is in equilibrium if the momentum of its parts is all constant. In terms of velocity, the system is in equilibrium if velocity is constant.
In a rotational mechanical equilibrium the angular momentum of the object is conserved and the net torque is zero. More generally in conservative systems, equilibrium is established at a point in configuration space where the gradient of the potential energy with respect to the generalized coordinates is zero.
If a particle in equilibrium has zero velocity, that particle is in static equilibrium . Since all particles in equilibrium have constant velocity, it is always possible to find an inertial reference frame in which the particle is stationary with respect to the frame.
Potential energy stability test
In a function which describes the system's potential energy, the system's equilibria can be determined using calculus. A system is in mechanical equilibrium at the critical points of the function describing the system's potential energy. These points can be located using the fact that the derivative of the function is zero at these points.
To determine whether or not the system is stable or unstable, the second derivative test is applied. With V denoting the static equation of motion of a system with a single degree of freedom the following calculations can be performed: Second derivative 0: The potential energy is at a local minimum. This is a stable equilibrium.
The response to a small perturbation is forces that tend to restore the equilibrium. If more than one stable equilibrium state is possible for a system, any equilibria whose potential energy is higher than the absolute minimum represent metastable states. Second derivative = 0: The state is neutral to the lowest order and nearly remains in equilibrium if displaced a small amount.
To investigate the precise stability of the system, higher order derivatives can be examined. The state is unstable if the lowest nonzero derivative is of odd order or has a negative value, stable if the lowest nonzero derivative is both of even order and has a positive value. If all derivatives are zero then it is impossible to derive any conclusions from the derivatives alone.
For example, the function e^{-1/x^2} (defined as 0 in x=0) has all derivatives equal to zero. At the same time, this function has a local minimum in x=0, so it is a stable equilibrium. If this function is multiplied by the Sign function, all derivatives will still be zero but it will become an unstable equilibrium.
Function is locally constant: In a truly neutral state the energy does not vary and the state of equilibrium has a finite width. This is sometimes referred to as a state that is marginally stable, or in a state of indifference, or astable equilibrium.
When considering more than one dimension, it is possible to get different results in different directions, for example stability with respect to displacements in the x-direction but instability in the y-direction, a case known as a saddle point. Generally an equilibrium is only referred to as stable if it is stable in all directions.
Statically indeterminate system
Sometimes the equilibrium equations force and moment equilibrium conditions are insufficient to determine the forces and reactions. Such a situation is described as statically indeterminate. Statically indeterminate situations can often be solved by using information from outside the standard equilibrium equations. illustration explaining the stable and unstable dynamics of buoyancy (B), center of buoyancy (CB), center of gravity (CG), and weight (W)
Further reading
Marion JB and Thornton ST. (1995) Classical Dynamics of Particles and Systems. Fourth Edition, Harcourt Brace & Company.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1370816276 under CC BY-SA 4.0; modifications have been made.