MEMS

in 1986 first introducing the term "microelectromechanical systems" MEMS (micro-electromechanical systems) is the technology of microscopic devices incorporating both electronic and moving parts.

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

in 1986 first introducing the term "microelectromechanical systems" MEMS (micro-electromechanical systems) is the technology of microscopic devices incorporating both electronic and moving parts. MEMS are made up of components between 1 and 100 micrometres in size (i.e., 0.001 to 0.1 mm), and MEMS devices generally range in size from 20 micrometres to a millimetre (i.e., 0.02 to 1.0 mm), although components arranged in arrays (e.g., digital micromirror devices) can be more than 1000 mm 2 .

They usually consist of a central unit that processes data (an integrated circuit chip such as microprocessor) and several components that interact with the surroundings (such as microsensors). Because of the large surface area to volume ratio of MEMS, forces produced by ambient electromagnetism (e.g., electrostatic charges and magnetic moments), and fluid dynamics (e.g., surface tension and viscosity) are more important design considerations than with larger scale mechanical devices.

MEMS technology is distinguished from molecular nanotechnology or molecular electronics in that the latter two must also consider surface chemistry. The potential of very small machines was appreciated before the technology existed that could make them (see, for example, Richard Feynman's famous 1959 lecture "There's Plenty of Room at the Bottom").

MEMS became practical once they could be fabricated using modified semiconductor device fabrication technologies, normally used to make electronics. These include molding and plating, wet etching (KOH, TMAH) and dry etching (RIE and DRIE), electrical discharge machining (EDM), and other technologies capable of manufacturing small devices.

They merge at the nanoscale into nanoelectromechanical systems (NEMS) and nanotechnology.

Types

There are two basic types of MEMS switch technology: capacitive and ohmic. A capacitive MEMS switch is developed using a moving plate or sensing element, which changes the capacitance. Ohmic switches are controlled by electrostatically controlled cantilevers.

Ohmic MEMS switches can fail from metal fatigue of the MEMS actuator (cantilever) and contact wear, since cantilevers can deform over time. Microsystem Technologies, published by Springer Publishing, Journal homepage

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375777072 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001375777072 · captured 2026-09-19 · ledger · version history

Cite this page as: encyclopegia.org, “MEMS”, snapshot enwiki-001375777072. https://encyclopegia.org/a/mems

Sources cited in this revision

20 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.