Lesson plan
Micrometer (device)
chart between fractional and decimal inch measurements etched onto the frame. A micrometer ( ), sometimes known as a micrometer screw gauge (MSG), is a device incorporating a calibrated screw for accurate measurement of the size of components. It is widely used in mechanical engineering, machining, metrology and most mechanical trades, along with other dimensional instruments such as dial, vernier, and digital calipers. Micrometers are usually, but not always, in the form of calipers (opposing ends joined by a frame). The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.
Article summary
chart between fractional and decimal inch measurements etched onto the frame. A micrometer ( ), sometimes known as a micrometer screw gauge (MSG), is a device incorporating a calibrated screw for accurate measurement of the size of components. It is widely used in mechanical engineering, machining, metrology and most mechanical trades, along with other dimensional instruments such as dial, vernier, and digital calipers. Micrometers are usually, but not always, in the form of calipers (opposing ends joined by a frame). The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.