---
title: Modem
slug: modem
qid: Q6888445
snapshot: modem-777330-9bf0ca6e70db441c
content_hash: 9bf0ca6e70db441cb8e7cb710ba3dfd78837c8583c6081824b66f7cf9acabaab
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1378923663
tags: [102876480, 20170177, 20539985, 22906785, 22906925, 22910827, 23603337, 24043274, 24339681, 24745113, 24745122, 25607702, 26220375, 26711028, 28269686, 40377096, 73150760, 73150761, 73589021, 7388697, 9229844]
---

# Modem

> [!note] Provenance
> Snapshot `modem-777330-9bf0ca6e70db441c` · content root `9bf0ca6e70db441c…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1378923663> · Licensed CC BY-SA 4.0

modems used a telephone handset as the audio medium, with the user dialing the desired number and then pressing the handset into the modem to complete the connection. These systems generally operated at a speed of 300 bits per second. A modulator-demodulator, commonly referred to as a modem, is a computer hardware device that converts data from a digital format into a format suitable for an analog transmission medium such as telephone or radio. A modem transmits data by modulating one or more carrier wave signals to encode digital information, while the receiver demodulates the signal to recreate the original digital information. The goal is to produce a signal that can be transmitted easily and decoded reliably. Modems can be used with almost any means of transmitting analog signals, from LEDs to radio. Early modems were devices that used audible sounds suitable for transmission over traditional telephone systems and leased lines. These generally provided Asynchronous communications at 110 or 300 bits per second (bit/s), and the connection between devices was normally manual, using an attached analogue telephone handset. By the 1970s, higher speeds of 1,200 and 2,400 bit/s for asynchronous dial connections, 4,800 bit/s for synchronous leased line connections and 35 kbit/s for synchronous conditioned leased lines were available.…

modems used a telephone handset as the audio medium, with the user dialing the desired number and then pressing the handset into the modem to complete the connection. These systems generally operated at a speed of 300 bits per second. A modulator-demodulator, commonly referred to as a modem, is a computer hardware device that converts data from a digital format into a format suitable for an analog transmission medium such as telephone or radio. A modem transmits data by modulating one or more carrier wave signals to encode digital information, while the receiver demodulates the signal to recreate the original digital information. The goal is to produce a signal that can be transmitted easily and decoded reliably. Modems can be used with almost any means of transmitting analog signals, from LEDs to radio. Early modems were devices that used audible sounds suitable for transmission over traditional telephone systems and leased lines. These generally provided Asynchronous communications at 110 or 300&nbsp;bits per second (bit/s), and the connection between devices was normally manual, using an attached analogue telephone handset. By the 1970s, higher speeds of 1,200 and 2,400&nbsp;bit/s for asynchronous dial connections, 4,800&nbsp;bit/s for synchronous leased line connections and 35&nbsp;kbit/s for synchronous conditioned leased lines were available. By the 1980s, less expensive 1,200 and 2,400&nbsp;bit/s dialup modems were being released, and modems working on radio and other systems were available. As device sophistication grew rapidly in the late 1990s, telephone-based modems quickly exhausted the available bandwidth, reaching 56&nbsp;kbit/s. The rise of public use of the internet during the late 1990s led to demands for much higher performance, leading to the move away from audio-based systems to entirely new encodings on cable television lines and short-range signals in subcarriers on telephone lines. The move to cellular telephones, especially in the late 1990s and the emergence of smartphones in the 2000s led to the development of ever-faster radio-based systems. Today, modems are ubiquitous and largely invisible, included in almost every mobile computing device in one form or another, and generally capable of speeds on the order of tens or hundreds of megabytes per second. ==Dial-up== A dial-up modem transmits computer data over an ordinary switched telephone line that has not been designed for data use. It was once a widely known technology, mass-marketed globally dial-up internet access. In the 1990s, tens of millions of people in the United States alone used dial-up modems for internet access. Dial-up service has since been largely superseded by broadband internet, such as DSL. Sportster 14,400 Fax Modem (1994)|alt= In the early 1990s, V.32 modems operating at 9,600 bit/s were introduced, but were expensive and were only starting to enter the market when V.32bis was standardized, which operated at 14,400 bit/s. Rockwell International's chip division developed a new driver chip set incorporating the V.32bis standard and aggressively priced it. Supra, Inc. arranged a short-term exclusivity arrangement with Rockwell, and developed the SupraFAXModem 14400 based on it. Introduced in January 1992 at ( ), it was half the price of the slower V.32 modems already on the market. This led to a price war, and by the end of the year V.32 was dead, never having been really established, and V.32bis modems were widely available for ( ). V.32bis was so successful that the older high-speed standards had little advantages. USRobotics (USR) fought back with a 16,800 bit/s version of HST, while AT&T introduced a one-off 19,200 bit/s method they referred to as V.32ter, but neither non-standard modem sold well. card for notebooks Consumer interest in these proprietary improvements waned during the lengthy introduction of the V.34 standard. While waiting, several companies decided to release hardware and introduced modems they referred to as V.Fast. In order to guarantee compatibility with V.34 modems once a standard was ratified (1994), manufacturers used more flexible components, generally a DSP and microcontroller, as opposed to purpose-designed ASIC modem chips. This would allow later firmware updates to conform with the standards once ratified. The ITU standard V.34 represents the culmination of these joint efforts. It employed the most powerful coding techniques available at the time, including channel encoding and shape encoding. From the mere four bits per symbol ( ), the new standards used the functional equivalent of 6 to 10 bits per symbol, plus increasing baud rates from 2,400 to 3,429, to create 14.4, 28.8, and modems. This rate is near the theoretical Shannon limit of a phone line. ==== technologies ==== While speeds had been available for leased-line modems for some time, they did not become available for dial up modems until the late 1990s. In the late 1990s, technologies to achieve speeds above began to be introduced. Several approaches were used, but all of them began as solutions to a single fundamental problem with phone lines. By the time technology companies began to investigate speeds above , telephone companies had switched almost entirely to all-digital networks. As soon as a phone line reached a local central office, a line card converted the analog signal from the subscriber to a digital one and conversely. While digitally encoded telephone lines notionally provide the same bandwidth as the analog systems they replaced, the digitization itself placed constraints on the types of waveforms that could be reliably encoded. The first problem was that the process of analog-to-digital conversion is intrinsically lossy, but second, and more importantly, the digital signals used by the telcos were not "linear": they did not encode all frequencies the same way, instead utilizing a nonlinear encoding (μ-law and a-law) meant to favor the nonlinear response of the human ear to voice signals. This made it very difficult to find a encoding that could survive the digitizing process. Modem manufacturers discovered that, while the analog to digital conversion could not preserve higher speeds, digital-to-analog conversions could. Because it was possible for an ISP to obtain a direct digital connection to a telco, a digital modem one that connects directly to a digital telephone network interface, such as T1 or PRI could send a signal that utilized every bit of bandwidth available in the system. While that signal still had to be converted back to analog at the subscriber end, that conversion would not distort the signal in the same way that the opposite direction did. ==== Early 56k dial-up products ==== The first 56k (56&nbsp;kbit/s) dial-up option was a proprietary design from USRobotics, which they called "X2" because 56k was twice the speed (×2) of 28k modems. At that time, USRobotics held a 40% share of the retail modem market, while Rockwell International held an 80% share of the modem chipset market. Concerned with being shut out, Rockwell began work on a rival 56k technology. They joined with Lucent and Motorola to develop what they called "K56Flex" or just "Flex". Both technologies reached the market around February 1997; although problems with K56Flex modems were noted in product reviews through July, within six months the two technologies worked equally well, with variations dependent largely on local connection characteristics. The retail price of these early 56k modems was about ( ), compared to ( ) for standard 33k modems. Compatible equipment was also required at the Internet service providers (ISPs) end, with costs varying depending on whether their current equipment could be upgraded. About half of all ISPs offered 56k support by October 1997. Consumer sales were relatively low, which USRobotics and Rockwell attributed to conflicting standards. ==Broadband== The term broadband was previously used to describe communications faster than what was available on voice grade channels. The term broadband gained widespread adoption in the late 1990s to describe internet access technology exceeding the 56 kilobit/s maximum of dialup. There are many broadband technologies, such as various DSL (digital subscriber line) technologies and cable broadband. DSL technologies such as ADSL, HDSL, and VDSL use telephone lines (wires that were installed by a telephone company and originally intended for use by a telephone subscriber) but do not utilize most of the rest of the telephone system. Their signals are not sent through ordinary phone exchanges, but are instead received by special equipment (a DSLAM) at the telephone company central office. Because the signal does not pass through the telephone exchange, no "dialing" is required, and the bandwidth constraints of an ordinary voice call are not imposed. This allows much higher frequencies, and therefore much faster speeds. ADSL in particular is designed to permit voice calls and data usage over the same line simultaneously. Similarly, cable modems use infrastructure originally intended to carry television signals, and like DSL, typically permit receiving television signals at the same time as broadband internet service. Other broadband modems include FTTx modems, satellite modems, and power line modems. ==Radio== Any communication technology sending digital data wirelessly involves a modem. This includes direct broadcast satellite, WiFi, WiMax, mobile phones, GPS, Bluetooth and NFC. Modern telecommunications and data networks also make extensive use of radio modems where long distance data links are required. Such systems are an important part of the PSTN, and are also in common use for high-speed computer network links to outlying areas where fiber optic is not economical. Wireless modems come in a variety of types, bandwidths, and speeds. Wireless modems are often referred to as transparent or smart. They transmit information that is modulated onto a carrier frequency to allow many wireless communication links to work simultaneously on different frequencies. Transparent modems operate in a manner similar to their phone line modem cousins. Typically, they were half duplex, meaning that they could not send and receive data at the same time. Typically, transparent modems are polled in a round robin manner to collect small amounts of data from scattered locations that do not have easy access to wired infrastructure. Transparent modems are most commonly used by utility companies for data collection. Smart modems come with media access controllers inside, which prevents random data from colliding and resends data that is not correctly received. Smart modems typically require more bandwidth than transparent modems, and typically achieve higher data rates. The IEEE 802.11 standard defines a short range modulation scheme that is used on a large scale throughout the world. ===Mobile broadband=== HSPA+ (EVDO) USB wireless modem from Movistar Colombia|alt=|110x110px Modems which use a mobile telephone system (GPRS, UMTS, HSPA, EVDO, WiMax, 5G etc.), are known as mobile broadband modems (sometimes also called wireless modems). Wireless modems can be embedded inside a laptop, mobile phone or other device, or be connected externally. External wireless modems include connect cards, USB modems, and cellular routers. Most GSM wireless modems come with an integrated SIM cardholder (i.e. Huawei E220, Sierra 881.) Some models are also provided with a microSD memory slot and/or jack for additional external antenna, (Huawei E1762, Sierra Compass 885.) The CDMA (EVDO) versions do not typically use R-UIM cards, but use Electronic Serial Number (ESN) instead. Until the end of April 2011, worldwide shipments of USB modems surpassed embedded 3G and 4G modules by 3:1 because USB modems can be easily discarded. Embedded modems may overtake separate modems as tablet sales grow and the incremental cost of the modems shrinks, so by 2016, the ratio may change to 1:1. Like mobile phones, mobile broadband modems can be SIM locked to a particular network provider. Unlocking a modem is achieved the same way as unlocking a phone, by using an 'unlock code'. ==Optical modem== A device that connects to a fiber optic network is known as an optical network terminal (ONT) or optical network unit (ONU). These are commonly used in fiber to the home installations, installed inside or outside a house to convert the optical medium to a copper Ethernet interface, after which a router or gateway is often installed to perform authentication, routing, NAT, and other typical consumer internet functions, in addition to "triple play" features such as telephony and television service. They are not a modem, although they perform a similar function and are sometimes referred to as a modem. Fiber optic systems can use quadrature amplitude modulation to maximize throughput. 16QAM uses a 16-point constellation to send four bits per symbol, with speeds on the order of 200 or 400 gigabits per second. 64QAM uses a 64-point constellation to send six bits per symbol, with speeds up to 65 terabits per second. Although this technology has been announced, it may not yet be commonly used. ==Home networking== Although the name modem is seldom used, some high-speed home networking applications do use modems, such as powerline ethernet. The G.hn standard for instance, developed by ITU-T, provides a high-speed (up to 1&nbsp;Gbit/s) local area network using existing home wiring (power lines, phone lines, and coaxial cables). G.hn devices use orthogonal frequency-division multiplexing (OFDM) to modulate a digital signal for transmission over the wire. As described above, technologies like Wi-Fi and Bluetooth also use modems to communicate over radio at short distances. ==See also== ==Notes== ==References== ==External links== Hayes-compatible Modems and AT Commands from the Serial Data Communications Programming Wikibook International Telecommunication Union ITU: Data communication over the telephone network Basic handshakes & modulations – V.22, V.22bis, V.32 and V.34 handshakes Getting connected: a history of modems – techradar Difference between Modems and Routers – Bugswave Telecommunications Transmission_Engineering Volume 2 Facilities - AT&T
