Lesson plan
MP 89
The MP 89 ( ; ) is a rubber tired variant of electric multiple units used on the Paris Metro. Designed by Roger Tallon, two types were built by Alstom for service on Lines 4 and 14, and began service on Line 6. The trains on Line 1 were moved to Line 4 between 2011 and 2013 to replace the older MP 59s, though only 48 trains are used for revenue service. The remaining four trains are stored either at Montrouge or Saint Ouen as operational spares.
Article summary
The MP 89 ( ; ) is a rubber tired variant of electric multiple units used on the Paris Metro. Designed by Roger Tallon, two types were built by Alstom for service on Lines 4 and 14, and began service on Line 6. The trains on Line 1 were moved to Line 4 between 2011 and 2013 to replace the older MP 59s, though only 48 trains are used for revenue service. The remaining four trains are stored either at Montrouge or Saint Ouen as operational spares.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.