Mud Gas Separator

Mud Gas Separator is commonly called a gas-buster or poor boy degasser.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Mud Gas Separator is commonly called a gas-buster or poor boy degasser. It captures and separates the large volumes of free gas within the drilling fluid. If there is a "kick" situation, this vessel separates the mud and the gas by allowing it to flow over baffle plates.

The gas then is forced to flow through a line, venting to a flare. A "kick" situation happens when the annular hydrostatic pressure in a drilling well temporarily (and usually relatively suddenly) falls below that of the formation, or pore, pressure in a permeable section downhole, and before control of the situation is lost.

It is always safe to design the mud/gas separator that will handle the maximum possible gas flow that can occur.

Types of Mud/Gas Separators

The principle of mud/gas separation for different types of vessels is the same. Closed bottom type Open bottom type Float type The closed-bottom separator, as the name implies, is closed at the vessel bottom with the mud return line directed back to the mud tanks.

Commonly called the poor boy, the open-bottom mud gas separator is typically mounted on a mud tank or trip tank with the bottom of the separator body submerged in the mud. Fluid level (mud leg) is maintained in a float-type mud gas separator by a float/valve configuration. The float opens and closes a valve on the mud return line to maintain the mud-leg level.

According to pedestal or base type there are: Fixed type Elevating type Poor boy degassers are usually named according to the vessel diameter. Types include: MGS800 MGS1000 MGS1200 MGS1400 The degasser type or configuration is typically customisable.

Principle of operation

The principle behind the mud gas separator is relatively simple. On the figure, the mud and gas mixture is fed at the inlet allowing it to impinge on a series of baffles designed to separate gas and mud. The free gas then is moved into the flare line to reduce the threat of toxic and hazardous gases and the mud then discharges to the shale shaker and to the tank.

See also

Mud systems

Text derived from https://en.wikipedia.org/w/index.php?oldid=1288316149 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001288316149 · captured 1746127036.0 · version history

Cite this page as: encyclopegia.org, “Mud Gas Separator”, snapshot enwiki-001288316149. https://encyclopegia.org/a/mud-gas-separator

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.