Multi-Evaporator System

A multi-evaporator system is a vapor-compression refrigeration system generally consisting of four major components: #Evaporator #Compressor #Condenser #Thermal expansion valve Sometimes in a refrigerator several loads are varied.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A multi-evaporator system is a vapor-compression refrigeration system generally consisting of four major components: #Evaporator #Compressor #Condenser #Thermal expansion valve Sometimes in a refrigerator several loads are varied. Refrigerators used to function at different loads operated under different condition of temperatures and pressures.

There may be arrangements possible for multi evaporators on the basis of single or multi compressors. If refrigerant from each evaporator compressed in the same single compressor then it is called as Multi-evaporator single-compressor system.

A multi-evaporator system is a vapor-compression refrigeration system generally consisting of four major components: Evaporator Compressor Condenser Thermal expansion valve Sometimes in a refrigerator several loads are varied. Refrigerators used to function at different loads operated under different condition of temperatures and pressures.

There may be arrangements possible for multi evaporators on the basis of single or multi compressors. If refrigerant from each evaporator compressed in the same single compressor then it is called as Multi-evaporator single-compressor system.

Single compressor-individual expansion valve

A two evaporator single compressor with individual expansion valves for each evaporator after passing through the back pressure valve enters into the compressors and hence there is a significant rise in temperature is observed. This system helps in dropping the pressure from high pressure evaporators with the help of back pressure valves.

The high pressure ratio is obtained which necessarily compresses the vapor to high extent from the higher temperature evaporators to condenser temperature. This kind of refrigerator has greater application in load varying purpose. Moreover, high value of COP and better operating economy is observed.

Mass flow rate through evaporators :- m 1 =Heat through evaporator 1(Q 1 )÷(specific enthalpy difference in evaporator 1) m 2 =Heat through evaporator 1(Q 2 )÷(specific enthalpy difference in evaporator 2)) The net work done is :- W = (Sum of masses through evaporator 1 and evaporator 2)*(specific enthalpy difference in compressor) W = (m 1 +m 2 )*(h 2 -h 1 )

Text derived from https://en.wikipedia.org/w/index.php?oldid=1279535108 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.