Multi-frequency receiver

Multi-Frequency signalling, (MF), is similar to the European version, CCITT Signaling System 5, (SS5).

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Multi-Frequency signalling, (MF), is similar to the European version, CCITT Signaling System 5, (SS5). The original format was five tones used in pairs. This later evolved to six tones.

Because its six tones are used only in pairs, this signaling format is sometimes referred to as "two-out-of-five code" or "two of six." exchange Multi-Frequency receivers have been present in US telephony at least since the late 1940s. In 1940s technology, receivers in 4XB and similar equipment used vacuum tubes. Later ones used RC filters and transistors.

Digital filters became commonplace in electronic switching systems of the 1980s. For example, in 5ESS switch such jobs are done by DSPs in the Global Digital Services Unit (GDSU).

Multi-Frequency signalling, (MF), is similar to the European version, CCITT Signaling System 5, (SS5). The original format was five tones used in pairs. This later evolved to six tones.

Because its six tones are used only in pairs, this signaling format is sometimes referred to as "two-out-of-five code" or "two of six." exchange]] Multi-Frequency receivers have been present in US telephony at least since the late 1940s. In 1940s technology, receivers in 4XB and similar equipment used vacuum tubes. Later ones used RC filters and transistors.

Digital filters became commonplace in electronic switching systems of the 1980s. For example, in 5ESS switch such jobs are done by DSPs in the Global Digital Services Unit (GDSU).

References

The 5ESS Switching System (The AT&T Technical Journal, July–August 1985, Vol. 64, No. 6, Part 2) Multi-Frequency Pulsing in Switching (AIEE Transactions, Volume 68, Part 1, 1949, pp. 392–396) Multi-Frequency Pulsing in Switching (Electrical Engineering, June 1949, pp. 505–510)

Text derived from https://en.wikipedia.org/w/index.php?oldid=991425017 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-000991425017 · captured 1606692296.0 · version history

Cite this page as: encyclopegia.org, “Multi-frequency receiver”, snapshot enwiki-000991425017. https://encyclopegia.org/a/multi-frequency-receiver

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.